ATSAME54N20A-AUT vs ATSAME54-XPRO 比較
詳細並排比較 ATSAME54N20A-AUT 由 Microchip Technology 與 ATSAME54-XPRO 由 Microchip Technology. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Microchip Technology
ATSAME54N20A-AUT - 120MHz ARM Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54N20A-AUT ✓ 啟用中Microchip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ 啟用中規格比較
| 參數 | ATSAME54N20A-AUT | ATSAME54-XPRO |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 類別 | Microcontrollers | Development Boards |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Core Architecture | ARM Cortex-M4F (32-bit) | 32-bit RISC |
| Maximum CPU Clock | 120 MHz | — |
| FPU | Single-precision hardware Floating Point Unit | — |
| Program Flash | 1 MB (Dual-Panel, with ECC) | — |
| SRAM | 256 KB (with ECC) | 256 KB with ECC (on target MCU) |
| Operating Voltage (VDDIO) | 1.71 V to 3.6 V | — |
| 工作溫度 | -40 C to +85 C (automotive grade) | — |
| 封裝 | 100-pin TQFP (14x14 mm) | — |
| ADC | 12-bit, up to 1 Msps | — |
| DAC | 12-bit | — |
| CAN-FD Controllers | 2 | — |
| Ethernet MAC | 10/100 Mbps | — |
| USB | Full-Speed + High-Speed USB 2.0 with on-chip PHY | — |
| External Memory Bus | QSPI/SPI (for external Flash/PSRAM) | — |
| DMA | Yes (DMAC) | — |
| 安裝類型 | Surface Mount | — |
| RoHS 狀態 | Compliant | Compliant |
| Product Type | — | Evaluation Kit / Development Board |
| Target MCU | — | ATSAME54P20A |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |