ATSAML21E15B-ANT vs ATSAML11E16A-AUTKPH 比較
詳細並排比較 ATSAML21E15B-ANT 由 Microchip Technology 與 ATSAML11E16A-AUTKPH 由 Microchip Technology. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Microchip Technology
ATSAML21E15B-ANT - 32KB Flash Cortex-M0+ MCU | Microchip | 32-TQFP
ATSAML21E15B-ANT ✓ 啟用中Microchip Technology
ATSAML11E16A-AUTKPH - 32MHz Cortex-M23 MCU, TrustZone | Microchip
ATSAML11E16A-AUTKPH ✓ 啟用中規格比較
| 參數 | ATSAML21E15B-ANT | ATSAML11E16A-AUTKPH |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 類別 | Microcontrollers | Microcontrollers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Core | ARM Cortex-M0+ (32-bit, single-core) | — |
| 最大時脈頻率 | 48 MHz | — |
| Flash Memory | 32 KB (32K x 8) | 64 KB (64K x 8) |
| SRAM | 4 KB | 16 KB |
| Supply Voltage Range | 1.6 V to 3.6 V | — |
| 工作溫度範圍 | -40°C to 105°C (industrial, -ANT suffix) | — |
| Active Current | Under 35 µA/MHz | — |
| Sleep Mode Current | 200 nA (typical, Standby Sleep) | < 100 nA |
| 封裝 | 32-pin TQFP (7x7 mm) | 32-pin TQFP (7x7 mm) |
| 安裝類型 | Surface Mount | Surface Mount |
| I/O Pins | [DATA_NEEDED: GPIO count] | — |
| ADC | 12-bit (number of channels [DATA_NEEDED]) | 12-bit |
| Communication Interfaces | SERCOM (UART/SPI/I2C), USB 2.0 Full-Speed Device | SERCOM (configurable as UART/SPI/I2C) |
| Touch Controller | Peripheral Touch Controller (PTC), capacitive | — |
| MSL 等級 | MSL3 (per TQFP JEDEC J-STD-020, [DATA_NEEDED: exact floor life]) | — |
| RoHS 狀態 | Compliant (Green, Pb-free) | Compliant |
| Functional Safety | IEC 60730 Class B (B-revision silicon) | — |
| Carrier Type | Tape & Reel | — |
| Core Architecture | — | ARM Cortex-M23 |
| Core Clock Speed | — | 32 MHz |
| Operating Voltage Range | — | 1.62 V to 3.63 V |
| Active Mode Current | — | < 25 uA/MHz |
| Security | — | ARM TrustZone-M, secure key storage, chip-level tamper resistance, integrated crypto (AES/SHA) |
| DAC | — | 10-bit |
| Operational Amplifiers | — | 2 on-chip |
| Analog Comparators | — | 2 on-chip |
| Touch Sensing | — | Enhanced Peripheral Touch Controller (PTC) |
| 工作溫度 | — | -40C to +85C (industrial) |
| Key Provisioning | — | Yes (factory-provisioned, KPH suffix) |