BTS426L1E3062ABUMA1 vs BTS426L1E3062AAUMA1 比較
詳細並排比較 BTS426L1E3062ABUMA1 由 Infineon 與 BTS426L1E3062AAUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTS426L1E3062ABUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Smart High-Side Power Switch (PROFET) | — |
| Manufacturer Series | Classic PROFET 12V | — |
| 拓撲 | 1:1 N-Channel High-Side | N-Channel Vertical Power FET with Charge Pump |
| Typical R_DS(on) | 5 mΩ | — |
| 最大輸出電流 | 5.8 A | — |
| Nominal Supply Voltage | 12 V | — |
| Operating Supply Voltage Range | [DATA_NEEDED: Vs operating range] | — |
| 封裝 | PG-TO263-5-2 (D2PAK, 4 leads + tab) | PG-TO263-5-2 (DPAK-5, surface mount) |
| 安裝類型 | Surface Mount | Surface Mount |
| 工作溫度 | -40 °C to +150 °C (TJ) | — |
| Fault Protection | Current Limiting (Fixed), Open Load Detection, Overtemperature, Short Circuit, Overvoltage (load dump), Reverse Battery | — |
| Diagnostic Output | Yes (status feedback) | Yes (ST pin, ground-referenced feedback) |
| Automotive Qualification | AEC-Q100 qualified (PROFET 12V family) | AEC-Q100 (per Classic PROFET 12V family) |
| Lead-Free / RoHS | Yes (per distributor listings) | — |
| Demagnetization | Fast (designed for inductive loads) | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | Classic PROFET 12V |
| 功能 | — | Smart High-Side Power Switch |
| 輸出數量 | — | 1 |
| 輸出配置 | — | High-Side |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Continuous Load Current | — | 7 A |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Input Type | — | CMOS-compatible, ground-referenced |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Technology | — | Smart SIPMOS, monolithic |
| 工作溫度範圍 | — | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| RoHS 狀態 | — | Compliant |