DS1338Z-33+ vs DS1338Z-3+T&R 比較
詳細並排比較 DS1338Z-33+ 由 Analog Devices 與 DS1338Z-3+T&R 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | DS1338Z-33+ | DS1338Z-3+T&R |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Clock & Timing | Clock & Timing |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Device Type | Real-time clock and calendar IC | Serial real-time clock and clock/calendar with nonvolatile RAM |
| Supply Voltage Range | 3 V to 5.5 V | — |
| Serial Interface | I²C, 2-wire serial | I2C, 2-wire serial |
| Calendar Format | Full binary-coded decimal (BCD) | — |
| Nonvolatile Memory | 56 bytes NV SRAM | — |
| Stored Time Fields | Seconds, minutes, hours, day, date, month, and year | — |
| Month-End Handling | Automatic adjustment for months with fewer than 31 days | — |
| 封裝 | 8-SOIC, 0.154 inch, 3.90 mm width | 8-pin SOIC, 0.154 inch body width, 3.90 mm |
| 安裝類型 | Surface mount | Surface mount |
| Temperature Format | HH:MM:SS, 12-hour and 24-hour | — |
| Date Format | YY-MM-DD-dd | — |
| Backup Timekeeping | Battery backup | — |
| Square-Wave Output | Available | — |
| Programmable I²C Address | [DATA_NEEDED: programmable I2C address configuration] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| I²C Maximum Bus Frequency | [DATA_NEEDED: I2C maximum bus frequency] | — |
| RTC Accuracy | [DATA_NEEDED: RTC accuracy] | — |
| Operating Current | [DATA_NEEDED: operating current] | — |
| NV SRAM Write Endurance | [DATA_NEEDED: NV SRAM write endurance] | — |
| RTC Memory | — | 56 bytes nonvolatile RAM |
| Time Format | — | Full binary-coded decimal (BCD) |
| Calendar Information | — | Seconds, minutes, hours, day, date, month, and year |
| 工作電源電壓 | — | 2.7 V to 5.5 V |
| 工作溫度 | — | -40 C to +85 C |
| Month-End Adjustment | — | Automatic for months with fewer than 31 days |
| Manufacturer Document Revision | — | DS1338-DS1338Z data sheet, Rev.10, 04/27/2015 |
| RoHS 狀態 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Oscillator Accuracy | — | [DATA_NEEDED: oscillator accuracy] |
| Backup Supply Configuration | — | [DATA_NEEDED: backup supply configuration] |