DS1338Z-33+ vs DS1338Z-3+T&R 비교
다음의 상세 나란히 비교: DS1338Z-33+ 제조: Analog Devices 및 DS1338Z-3+T&R 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | DS1338Z-33+ | DS1338Z-3+T&R |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Clock & Timing | Clock & Timing |
| 수명 주기 상태 | 활성 | 활성 |
| Device Type | Real-time clock and calendar IC | Serial real-time clock and clock/calendar with nonvolatile RAM |
| Supply Voltage Range | 3 V to 5.5 V | — |
| Serial Interface | I²C, 2-wire serial | I2C, 2-wire serial |
| Calendar Format | Full binary-coded decimal (BCD) | — |
| Nonvolatile Memory | 56 bytes NV SRAM | — |
| Stored Time Fields | Seconds, minutes, hours, day, date, month, and year | — |
| Month-End Handling | Automatic adjustment for months with fewer than 31 days | — |
| 패키지 | 8-SOIC, 0.154 inch, 3.90 mm width | 8-pin SOIC, 0.154 inch body width, 3.90 mm |
| 실장 유형 | Surface mount | Surface mount |
| Temperature Format | HH:MM:SS, 12-hour and 24-hour | — |
| Date Format | YY-MM-DD-dd | — |
| Backup Timekeeping | Battery backup | — |
| Square-Wave Output | Available | — |
| Programmable I²C Address | [DATA_NEEDED: programmable I2C address configuration] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| I²C Maximum Bus Frequency | [DATA_NEEDED: I2C maximum bus frequency] | — |
| RTC Accuracy | [DATA_NEEDED: RTC accuracy] | — |
| Operating Current | [DATA_NEEDED: operating current] | — |
| NV SRAM Write Endurance | [DATA_NEEDED: NV SRAM write endurance] | — |
| RTC Memory | — | 56 bytes nonvolatile RAM |
| Time Format | — | Full binary-coded decimal (BCD) |
| Calendar Information | — | Seconds, minutes, hours, day, date, month, and year |
| 동작 공급 전압 | — | 2.7 V to 5.5 V |
| 동작 온도 | — | -40 C to +85 C |
| Month-End Adjustment | — | Automatic for months with fewer than 31 days |
| Manufacturer Document Revision | — | DS1338-DS1338Z data sheet, Rev.10, 04/27/2015 |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Oscillator Accuracy | — | [DATA_NEEDED: oscillator accuracy] |
| Backup Supply Configuration | — | [DATA_NEEDED: backup supply configuration] |