EPC1PI8 vs EPC1PC8 比較
詳細並排比較 EPC1PI8 由 Altera 與 EPC1PC8 由 Altera. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | EPC1PI8 | EPC1PC8 |
|---|---|---|
| 品牌 | Altera | Altera |
| 類別 | Memory ICs | Memory ICs |
| 生命週期狀態 | Obsolete | Obsolete |
| 記憶體類型 | OTP Configuration PROM (EPROM-based) | OTP Configuration PROM (Non-volatile) |
| 記憶體容量 | 1 Mbit | 1 Mbit (1,048,576 bits) |
| Programmable Type | OTP (One-Time Programmable) | — |
| 介面 | Serial (Altera FPGA configuration protocol) | — |
| Maximum Configuration Clock (DCLK) | 8 MHz | — |
| Supply Voltage (VCC) | 4.5 V to 5.5 V (5 V mode); 3.0 V to 3.6 V (3.3 V mode) | 5.0 V (typical) |
| 工作溫度範圍 | -40 C to +85 C | — |
| 封裝 | 8-PDIP (0.300 inch, 7.62 mm) | 8-pin PDIP (8-PDIP, 300 mil) |
| 安裝類型 | Through-Hole (DIP) | Through-Hole (THT) |
| Supported FPGA Families | ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX | — |
| Configuration Mode | Serial (PS mode) - Data, DCLK, nCS, OE/nCONFIG | Serial (1-bit data, 1-bit clock) |
| Programming Method | External programmer + Altera BitBlaster / ByteBlaster | — |
| 腳位數 | 8 | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status - not present in verified web data] | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free / SnPb plating] |
| Configuration Interface | — | Altera proprietary serial (DATA, DCLK, OE, nCS) |
| Programmability | — | One-Time Programmable (OTP) |
| Target FPGAs | — | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A |
| Pin Pitch | — | 2.54 mm (0.100 in) |
| 工作溫度 | — | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] |
| Programming Hardware | — | Altera MasterBlaster / ByteBlaster (legacy programmer) |
| MSL 等級 | — | [DATA_NEEDED: moisture sensitivity level] |