ICL7136CMH vs ICL7136CQH+D 比較
詳細並排比較 ICL7136CMH 由 Analog Devices 與 ICL7136CQH+D 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | ICL7136CMH | ICL7136CQH+D |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | 啟用中 | 啟用中 |
| ADC Type | 3.5-digit dual-slope A/D converter | — |
| 解析度 | 3.5 digits | 3.5 digits |
| Number of Input Channels | 1 channel | — |
| Input Architecture | True differential | — |
| Reference Architecture | Differential reference | — |
| Calibration | Automatic calibration | — |
| Display Output | 3.5-digit, seven-segment display driver | Integrated LCD driver |
| 工作電源電壓 | 9 V | — |
| Power Dissipation | 500 mW (1/2 W) | — |
| Minimum Operating Temperature | 0 °C | — |
| Maximum Operating Temperature | 70 °C | — |
| Package Type | MQFP-44 (10 mm × 10 mm) | 44-pin PLCC |
| 腳位數 | 44 pins | — |
| 安裝類型 | Surface mount | — |
| Screening Level | Commercial | — |
| Technology | CMOS | — |
| RoHS 狀態 | RoHS compliant | [DATA_NEEDED: RoHS status] |
| Converter Type | — | Dual-slope A/D converter |
| Architecture | — | 1-channel, 1-function ADC |
| Input Configuration | — | True differential input |
| Reference Configuration | — | True differential reference |
| Output Format | — | BCD, 4-bit, parallel output |
| Power Class | — | Low-power A/D converter |
| Periodic Interference Rejection | — | Automatic dual-slope rejection |
| Overrange Recovery | — | Zero-integrator phase |
| Ratiometric Measurement | — | Supported |
| Package Dimensions | — | 16.59 mm x 16.59 mm |
| Package Code | — | QCCJ |
| Terminal Form | — | J-bend |
| Number of Terminals | — | 44 |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| 工作溫度範圍 | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| 輸入電壓範圍 | — | [DATA_NEEDED: input voltage range] |
| Reference Voltage Range | — | [DATA_NEEDED: reference voltage range] |
| Conversion Time | — | [DATA_NEEDED: conversion time] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Normal Mode Rejection | — | [DATA_NEEDED: normal-mode rejection] |
| Offset Error | — | [DATA_NEEDED: offset error] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |