ICL7136CMH vs ICL7136CQH+D 비교

다음의 상세 나란히 비교: ICL7136CMH 제조: Analog Devices 및 ICL7136CQH+D 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
ICL7136CMH ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH ✓ 활성
Analog Devices
ICL7136CQH+D ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D ✓ 활성

사양 비교

파라미터 ICL7136CMH ICL7136CQH+D
브랜드 Analog Devices Analog Devices
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 활성 활성
ADC Type 3.5-digit dual-slope A/D converter —
분해능 3.5 digits 3.5 digits
Number of Input Channels 1 channel —
Input Architecture True differential —
Reference Architecture Differential reference —
Calibration Automatic calibration —
Display Output 3.5-digit, seven-segment display driver Integrated LCD driver
동작 공급 전압 9 V —
Power Dissipation 500 mW (1/2 W) —
Minimum Operating Temperature 0 °C —
Maximum Operating Temperature 70 °C —
Package Type MQFP-44 (10 mm × 10 mm) 44-pin PLCC
핀 수 44 pins —
실장 유형 Surface mount —
Screening Level Commercial —
Technology CMOS —
RoHS 상태 RoHS compliant [DATA_NEEDED: RoHS status]
Converter Type — Dual-slope A/D converter
Architecture — 1-channel, 1-function ADC
Input Configuration — True differential input
Reference Configuration — True differential reference
Output Format — BCD, 4-bit, parallel output
Power Class — Low-power A/D converter
Periodic Interference Rejection — Automatic dual-slope rejection
Overrange Recovery — Zero-integrator phase
Ratiometric Measurement — Supported
Package Dimensions — 16.59 mm x 16.59 mm
Package Code — QCCJ
Terminal Form — J-bend
Number of Terminals — 44
REACH Status — [DATA_NEEDED: REACH status]
동작 온도 범위 — [DATA_NEEDED: operating temperature range]
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
입력 전압 범위 — [DATA_NEEDED: input voltage range]
Reference Voltage Range — [DATA_NEEDED: reference voltage range]
Conversion Time — [DATA_NEEDED: conversion time]
Input Impedance — [DATA_NEEDED: input impedance]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Normal Mode Rejection — [DATA_NEEDED: normal-mode rejection]
Offset Error — [DATA_NEEDED: offset error]
Gain Error — [DATA_NEEDED: gain error]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청