ISL83072EIUZA vs MAX3076EESD+T 比較

詳細並排比較 ISL83072EIUZA 由 Renesas Electronics 與 MAX3076EESD+T 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Renesas Electronics
ISL83072EIUZA ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas

ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas

ISL83072EIUZA ✓ 啟用中
Analog Devices
MAX3076EESD+T MAX3076EESD+T - 16Mbps RS-485/RS-422 3.3V Transceiver

MAX3076EESD+T - 16Mbps RS-485/RS-422 3.3V Transceiver

MAX3076EESD+T ✓ 啟用中

規格比較

參數 ISL83072EIUZA MAX3076EESD+T
品牌 Renesas Electronics Analog Devices
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
功能 Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
資料速率 500 kbps (slew-rate limited, per family) —
供應電壓 3.0 V to 3.6 V (single 3.3V supply) —
Bus ESD Protection (HBM) ±15 kV (RS-485 bus pins) —
Other-Pin ESD (HBM) >7 kV —
Unit Load 1/8 unit load (up to 256 nodes) —
Receiver Fail-Safe Full fail-safe (open, short, terminated, floating) —
Hot Plug Tolerant Yes (Tx/Rx remain three-state during power-up on versions with enable pins) —
工作溫度 -40 °C to +85 °C (industrial) [DATA_NEEDED: operating temperature range]
封裝 8-MSOP 14-pin narrow SOIC, 3.90 mm width
安裝類型 Surface Mount Surface mount
RoHS 狀態 Compliant unknown
Product Type — RS-485/RS-422 transceiver
Supply Voltage Range — 2.97 V to 3.63 V
Maximum Data Rate — 16 Mbps
Driver Count — 1
Receiver Count — 1
ESD Protection — ±15 kV
Fail-Safe Receiver — Yes; logic-high output when receiver inputs are open or shorted
Hot-Swap Support — Yes
Interface Standards — RS-485 and RS-422
Propagation Delay — [DATA_NEEDED: driver and receiver propagation delay]
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Driver Output Protection — [DATA_NEEDED: driver output protection details]
供應電流 — [DATA_NEEDED: operating supply current]
AEC-Q100 Qualification — not_applicable

資料表與資源

瀏覽所有產品 建立 BOM 索取報價