KSZ8041NL-AM vs KSZ8041TL 比較
詳細並排比較 KSZ8041NL-AM 由 Microchip Technology 與 KSZ8041TL 由 Microchip Technology. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | KSZ8041NL-AM | KSZ8041TL |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 類別 | RF Transceivers | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 功能 | 10BASE-T/100BASE-TX Ethernet PHY transceiver | — |
| 介面 | MII / RMII | — |
| Number of Ports | 1 (1/1 Transceiver, Full) | — |
| 資料速率 | 10 Mbps / 100 Mbps | — |
| 供應電壓 | 3.3 V (single supply) | [DATA_NEEDED: supply voltage range] |
| Auto MDI/MDI-X | Yes (HP Auto MDI/MDI-X) | — |
| Auto-Negotiation | Yes | — |
| 封裝 | 32-QFN (5x5 mm) with exposed pad | 48-TQFP (7 x 7 mm) |
| 安裝類型 | Surface Mount | Surface mount |
| 工作溫度 | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Crystal Reference | 25 MHz | — |
| RMII Clock (50 MHz) | External clock source required (per KSZ8041NL design) | — |
| Signaling Distance | Extended (mixed-signal design, per datasheet) | — |
| MSL 等級 | [DATA_NEEDED: MSL rating] | — |
| Power Consumption | Low-power mixed-signal design (per datasheet); [DATA_NEEDED: typical mA value] | — |
| RoHS 狀態 | Compliant | [DATA_NEEDED: RoHS status] |
| Datasheet Document | KSZ8041NL/RNL Data Sheet (Microchip DS00002245B) | — |
| Product Type | — | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Supported Data Rates | — | 10 Mb/s and 100 Mb/s |
| Host Interfaces | — | MII, RMII, and SMII |
| Supply Architecture | — | Single-supply |
| Cable Standard | — | 10BASE-T and 100BASE-TX |
| Mixed-Signal Design | — | Yes; intended to extend signaling distance while reducing power consumption |
| Auto MDI/MDIX | — | HP Auto MDI/MDIX |
| Interrupt Signal | — | INTRP on pin 32; optional PHY-register status-update signal |
| Number of Drivers/Receivers | — | 1 driver and 1 receiver |
| Device Type | — | Ethernet interface IC / physical-layer transceiver |
| Interface Clock | — | [DATA_NEEDED: clock frequency] |
| Ethernet Magnetics | — | [DATA_NEEDED: supported magnetics and isolation configuration] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |