LM224DG vs LM224DR 比較
詳細並排比較 LM224DG 由 onsemi 與 LM224DR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Texas Instruments
LM224DR - Quad General-Purpose Op Amp | Texas Instruments (Tape & Reel)
LM224DR ✓ 啟用中規格比較
| 參數 | LM224DG | LM224DR |
|---|---|---|
| 品牌 | onsemi | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 庫存狀態 | — | In Stock |
| 單價 (USD) | — | $0.16 |
| Product Type | Quad operational amplifier | Standard general-purpose operational amplifier |
| Number of Channels | 4 circuits | — |
| Amplifier Type | General-purpose operational amplifier | — |
| Gain-Bandwidth Product | 1 MHz | [DATA_NEEDED: gain-bandwidth product] |
| Supply Voltage Range | 3 V to 32 V | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | 5 mV | [DATA_NEEDED: input offset voltage] |
| Common-Mode Rejection Ratio | 70 dB minimum | — |
| Input Type | True differential inputs | — |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| 封裝 | 14-pin SOIC, 0.154 inch (3.90 mm) width | 14-SOIC |
| 安裝類型 | Surface mount | Surface mount |
| 工作溫度範圍 | -25 C to +85 C | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | unknown |
| Number of Amplifier Circuits | — | 4 circuits |
| 工作溫度 | — | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current capability] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Noise | — | [DATA_NEEDED: noise specifications] |