MAX152CWP vs MAX150AEWP+T 比較

詳細並排比較 MAX152CWP 由 Maxim Integrated 與 MAX150AEWP+T 由 Maxim Integrated. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Maxim Integrated
MAX150AEWP+T MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated

MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated

MAX150AEWP+T ✓ 啟用中

規格比較

參數 MAX152CWP MAX150AEWP+T
品牌 Maxim Integrated Maxim Integrated
類別 ADC/DAC ADC/DAC
生命週期狀態 Obsolete 啟用中
解析度 8 bits 8 bit
Number of Input Channels 1 (single-ended analog input; internal 8:1 multiplexer available on related parts) —
Conversion Architecture Half-flash (sub-ranging flash) —
Conversion Time 1.8 us —
Throughput / Sample Rate 400 ksps —
輸入電壓範圍 0 V to VREF —
Supply Voltage (Single Supply) +2.7 V to +3.6 V (+3V nominal) —
Operating Current (Active) 1.5 mA typical —
Power-Down Current 1 uA typical —
Wake-Up Time from Power-Down 900 ns —
Full-Power Analog Input Bandwidth 300 kHz —
Internal Track/Hold Yes (integrated) —
參考電壓 Internal or external (ratiometric mode available, VREF = VCC) Internal 2.5 V (external overdrive supported)
介面 Microprocessor-compatible parallel (8-bit data bus) —
封裝 20-pin SOIC wide-body (WP), 7.5 mm body width 20-pin Wide-Body SOIC (EWP)
工作溫度範圍 0C to +70C (commercial) -40 C to +85 C
安裝類型 Surface Mount Surface Mount (Tape & Reel)
RoHS 狀態 [DATA_NEEDED: RoHS status - check manufacturer declaration] Compliant
ADC Architecture — Half-flash (two-step) with track-and-hold
Number of Channels — 1 single-ended input
Conversion Time (typ) — 1.34 us
Maximum Sample Rate — approx. 500 ksps
Analog Input Range — 0 V to +5 V (unipolar)
Analog Supply (AVCC) — +5 V nominal
Digital Supply (DVCC) — +5 V nominal
Typical Power Dissipation — 35 mW (analog) + 40 mW (digital)
Output Interface — Parallel 8-bit, three-state, microprocessor-compatible
Input Track-and-Hold Acquisition — approx. 100 ns to 0.01% accuracy

資料表與資源

瀏覽所有產品 建立 BOM 索取報價