MAX3221EIPWR vs MAX3221CPWRE4 比較
詳細並排比較 MAX3221EIPWR 由 Texas Instruments 與 MAX3221CPWRE4 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)
MAX3221EIPWR ✓ 啟用中Texas Instruments
MAX3221CPWRE4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221CPWRE4 ✓ 啟用中規格比較
| 參數 | MAX3221EIPWR | MAX3221CPWRE4 |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Single-channel RS-232 line driver and receiver | — |
| Supply Voltage Range | 3V to 5.5V | 3 V to 5.5 V |
| Maximum Data Rate | 250kbps | 250 kbit/s |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| RS-232 ESD Protection | ±15kV | — |
| ESD Standard | IEC 61000-4-2 | — |
| RS-232 Standard Compliance | TIA/EIA-232-F | — |
| Charge-Pump Capacitors Required | 4 external capacitors | — |
| 封裝 | 16-pin TSSOP | 16-pin TSSOP |
| 安裝類型 | Surface mount | Surface mount |
| 介面類型 | Full RS-232 transceiver | — |
| Driver and Receiver Count | 1/1 transceiver | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Shutdown and Enable Functions | [DATA_NEEDED: shutdown and enable pin functions] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Single-channel RS-232 line driver/receiver |
| Line Drivers | — | 1 |
| Line Receivers | — | 1 with dedicated enable pin |
| Charge-Pump Architecture | — | Dual charge-pump circuit |
| External Charge-Pump Capacitors | — | 0.1 µF |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including GND |
| RS-232 Compliance | — | TIA/EIA-232-F |
| ITU Recommendation | — | ITU V.28 |
| Low Standby Current | — | 1 µA typical |
| Logic Input Compatibility | — | Accepts 5 V logic input with 3.3 V supply |