MAX3221EIPWR vs MAX3221CPWRE4 So sánh
So sánh chi tiết song song của MAX3221EIPWR bằng Texas Instruments và MAX3221CPWRE4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)
MAX3221EIPWR ✓ Hoạt độngTexas Instruments
MAX3221CPWRE4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221CPWRE4 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX3221EIPWR | MAX3221CPWRE4 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Single-channel RS-232 line driver and receiver | — |
| Supply Voltage Range | 3V to 5.5V | 3 V to 5.5 V |
| Maximum Data Rate | 250kbps | 250 kbit/s |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| RS-232 ESD Protection | ±15kV | — |
| ESD Standard | IEC 61000-4-2 | — |
| RS-232 Standard Compliance | TIA/EIA-232-F | — |
| Charge-Pump Capacitors Required | 4 external capacitors | — |
| Hộp | 16-pin TSSOP | 16-pin TSSOP |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Loại giao diện | Full RS-232 transceiver | — |
| Driver and Receiver Count | 1/1 transceiver | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Shutdown and Enable Functions | [DATA_NEEDED: shutdown and enable pin functions] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Single-channel RS-232 line driver/receiver |
| Line Drivers | — | 1 |
| Line Receivers | — | 1 with dedicated enable pin |
| Charge-Pump Architecture | — | Dual charge-pump circuit |
| External Charge-Pump Capacitors | — | 0.1 µF |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including GND |
| RS-232 Compliance | — | TIA/EIA-232-F |
| ITU Recommendation | — | ITU V.28 |
| Low Standby Current | — | 1 µA typical |
| Logic Input Compatibility | — | Accepts 5 V logic input with 3.3 V supply |