MAX3483AEASA+ vs MAX3485AEASA+T 比較
詳細並排比較 MAX3483AEASA+ 由 Analog Devices 與 MAX3485AEASA+T 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Analog Devices
MAX3485AEASA+T - 20Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485AEASA+T ✓ 啟用中規格比較
| 參數 | MAX3483AEASA+ | MAX3485AEASA+T |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 供應電壓 | 3.3 V | — |
| Maximum Data Rate | 20 Mbps | 20 Mbps |
| ESD Protection | ±20 kV | ±20 kV |
| Transceiver Configuration | 1/1 half-duplex transceiver | 1 driver / 1 receiver |
| Supported Standards | RS-422 and RS-485 | RS-485 and RS-422 |
| Driver Architecture | Slew-rate-limited differential driver | — |
| Receiver Architecture | Differential receiver | — |
| 封裝 | 8-pin SOIC | 8-pin SOIC |
| 安裝類型 | Surface mount | Surface mount |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Direction Control | [DATA_NEEDED: transceiver direction-control method] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 供應電流 | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | [DATA_NEEDED: common-mode voltage range] |
| Maximum Bus Load | [DATA_NEEDED: maximum unit loads per bus] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | RS-485/RS-422 transceiver |
| Communication Mode | — | Half duplex |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Driver Edge Rate | — | Slew-rate limited |
| Ordering Package | — | Tape and reel |
| Automotive Qualification | — | Automotive-grade MAX3485AE variant |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |