MAX3483AEASA+ vs MAX3485AEASA+T 비교
다음의 상세 나란히 비교: MAX3483AEASA+ 제조: Analog Devices 및 MAX3485AEASA+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
MAX3485AEASA+T - 20Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485AEASA+T ✓ 활성사양 비교
| 파라미터 | MAX3483AEASA+ | MAX3485AEASA+T |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 공급 전압 | 3.3 V | — |
| Maximum Data Rate | 20 Mbps | 20 Mbps |
| ESD Protection | ±20 kV | ±20 kV |
| Transceiver Configuration | 1/1 half-duplex transceiver | 1 driver / 1 receiver |
| Supported Standards | RS-422 and RS-485 | RS-485 and RS-422 |
| Driver Architecture | Slew-rate-limited differential driver | — |
| Receiver Architecture | Differential receiver | — |
| 패키지 | 8-pin SOIC | 8-pin SOIC |
| 실장 유형 | Surface mount | Surface mount |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Direction Control | [DATA_NEEDED: transceiver direction-control method] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | [DATA_NEEDED: common-mode voltage range] |
| Maximum Bus Load | [DATA_NEEDED: maximum unit loads per bus] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | RS-485/RS-422 transceiver |
| Communication Mode | — | Half duplex |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Driver Edge Rate | — | Slew-rate limited |
| Ordering Package | — | Tape and reel |
| Automotive Qualification | — | Automotive-grade MAX3485AE variant |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |