MAX3485ECPA+ vs MAX3485CPA+ 比較
詳細並排比較 MAX3485ECPA+ 由 Analog Devices 與 MAX3485CPA+ 由 Maxim Integrated. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX3485ECPA+ | MAX3485CPA+ |
|---|---|---|
| 品牌 | Analog Devices | Maxim Integrated |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| 供應電壓 | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection | ±15 kV | [DATA_NEEDED: device ESD rating] |
| Transceiver Configuration | 1 driver / 1 receiver | Half-duplex transceiver |
| Communication Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | — |
| Driver Architecture | Slew-rate-limited | Slew-rate limited |
| 封裝 | 8-pin PDIP | 8-pin PDIP |
| 安裝類型 | Through-hole | Through hole |
| ESD Protection Level | ±15 kV | — |
| RoHS 狀態 | Compliant | [DATA_NEEDED: RoHS status] |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| 供應電流 | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Shutdown Supply Current | [DATA_NEEDED: shutdown supply current] | — |
| 資料速率 | — | Up to 10 Mbps |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Communication Standard | — | RS-485 and RS-422 |
| Low-Power Operation | — | 3.3 V low-power transceiver |
| EMI and Reflection Control | — | Slew-rate-limited driver intended to minimize EMI and cable reflections |
| 工作溫度 | — | [DATA_NEEDED: operating temperature range] |
| Driver Differential Output | — | [DATA_NEEDED: differential output voltage specifications] |
| Receiver Input Range | — | [DATA_NEEDED: receiver differential input range] |
| Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Slew Rate | — | [DATA_NEEDED: driver slew-rate value] |
| REACH Status | — | [DATA_NEEDED: REACH status] |