MAX3485ECPA+ vs MAX3485CPA+ 비교
다음의 상세 나란히 비교: MAX3485ECPA+ 제조: Analog Devices 및 MAX3485CPA+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX3485ECPA+ | MAX3485CPA+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| 공급 전압 | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection | ±15 kV | [DATA_NEEDED: device ESD rating] |
| Transceiver Configuration | 1 driver / 1 receiver | Half-duplex transceiver |
| Communication Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | — |
| Driver Architecture | Slew-rate-limited | Slew-rate limited |
| 패키지 | 8-pin PDIP | 8-pin PDIP |
| 실장 유형 | Through-hole | Through hole |
| ESD Protection Level | ±15 kV | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Shutdown Supply Current | [DATA_NEEDED: shutdown supply current] | — |
| 데이터 속도 | — | Up to 10 Mbps |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Communication Standard | — | RS-485 and RS-422 |
| Low-Power Operation | — | 3.3 V low-power transceiver |
| EMI and Reflection Control | — | Slew-rate-limited driver intended to minimize EMI and cable reflections |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| Driver Differential Output | — | [DATA_NEEDED: differential output voltage specifications] |
| Receiver Input Range | — | [DATA_NEEDED: receiver differential input range] |
| Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Slew Rate | — | [DATA_NEEDED: driver slew-rate value] |
| REACH Status | — | [DATA_NEEDED: REACH status] |