MAX3485ECSA+T vs MAX3485ESA+T 比較

詳細並排比較 MAX3485ECSA+T 由 Analog Devices 與 MAX3485ESA+T 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Analog Devices
MAX3485ESA+T MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ESA+T ✓ 啟用中

規格比較

參數 MAX3485ECSA+T MAX3485ESA+T
品牌 Analog Devices Analog Devices
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type RS-485/RS-422 half-duplex transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Maximum Data Rate 12 Mbps 10 Mbps
ESD Protection (Bus Pins) +/-15 kV —
Driver / Receiver Count 1 driver, 1 receiver —
Duplex Half-duplex —
Driver Output Type Slew-rate-limited differential —
封裝 8-pin NSOIC (SOIC-8) 8-SOIC
安裝類型 Surface mount Surface mount
Operating Supply Range 3.3 V powered, single supply —
RoHS 狀態 RoHS3 compliant —
Lead-Free Status Lead free —
Driver Protection Short-circuit current limit and thermal shutdown —
ESD Rating Reference +/-15 kV ESD-protected bus pins —
工作溫度範圍 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Unit Load / Max Nodes [DATA_NEEDED: unit load and maximum node count] —
Data Rate of Alternative MAX3485CSA+ 10 Mbps —
供應電壓 — 3.3 V
Driver Count — 1
Receiver Count — 1
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Package Dimensions — 3.90 mm width
Ordering Package — Tape and reel
供應電流 — [DATA_NEEDED: supply current]
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
ESD Protection — [DATA_NEEDED: ESD protection rating]
Common-Mode Voltage Range — [DATA_NEEDED: receiver common-mode voltage range]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價