MAX3485ECSA+T vs MAX3485ESA+T Vergleich
Detaillierter Direktvergleich von MAX3485ECSA+T von Analog Devices und MAX3485ESA+T von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECSA+T ✓ AktivAnalog Devices
MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+T ✓ AktivSpezifikationsvergleich
| Parameter | MAX3485ECSA+T | MAX3485ESA+T |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-485/RS-422 half-duplex transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection (Bus Pins) | +/-15 kV | — |
| Driver / Receiver Count | 1 driver, 1 receiver | — |
| Duplex | Half-duplex | — |
| Driver Output Type | Slew-rate-limited differential | — |
| Gehäuse | 8-pin NSOIC (SOIC-8) | 8-SOIC |
| Montageart | Surface mount | Surface mount |
| Operating Supply Range | 3.3 V powered, single supply | — |
| RoHS-Status | RoHS3 compliant | — |
| Lead-Free Status | Lead free | — |
| Driver Protection | Short-circuit current limit and thermal shutdown | — |
| ESD Rating Reference | +/-15 kV ESD-protected bus pins | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Unit Load / Max Nodes | [DATA_NEEDED: unit load and maximum node count] | — |
| Data Rate of Alternative MAX3485CSA+ | 10 Mbps | — |
| Versorgungsspannung | — | 3.3 V |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Package Dimensions | — | 3.90 mm width |
| Ordering Package | — | Tape and reel |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |