MAX396EPI+ vs MAX397CPI+ 比較
詳細並排比較 MAX396EPI+ 由 Analog Devices 與 MAX397CPI+ 由 Maxim Integrated. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX396EPI+ | MAX397CPI+ |
|---|---|---|
| 品牌 | Analog Devices | Maxim Integrated |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | 1-circuit 16:1 analog multiplexer | Dual 8:1 precision CMOS analog multiplexer |
| Multiplexer Configuration | 16:1 | — |
| Maximum On-Resistance | 100 ohms | 100 ohms |
| On-Resistance Matching Between Channels | 6 ohms maximum | — |
| On-Resistance Variation Over Signal Range | 10 ohms maximum | — |
| Maximum Charge Injection | 5 pC | 5 pC |
| Single-Supply Operating Range | +2.7 V to +16 V | — |
| Dual-Supply Operating Range | ±2.7 V to ±8 V | — |
| Logic Compatibility | CMOS logic input compatible | CMOS logic input compatible |
| ESD Protection | Greater than 2,000 V per Method 3015.7 | Greater than 2,000 V per Method 3015.7 |
| Process Technology | Low-voltage silicon-gate CMOS | Low-voltage silicon-gate CMOS process |
| 封裝 | 28-pin PDIP | 28-pin PDIP |
| 安裝類型 | Through-hole | Through-hole |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Channel Leakage Current | [DATA_NEEDED: channel leakage current] | — |
| Switching Time | [DATA_NEEDED: switching time] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | Not applicable | — |
| Number of Circuits | — | 2 circuits |
| Channel Configuration | — | 16-channel dual 8-channel |
| Multiplexer Ratio | — | 8:1 per circuit |
| On-Resistance Matching | — | Within 6 ohms |
| On-Resistance Flatness | — | Within 10 ohms over the specified signal range |
| Single-Supply Voltage Range | — | +2.7 V to +16 V |
| Dual-Supply Voltage Range | — | ±2.7 V to ±8 V |
| Switching Performance | — | Fast switching |
| Temperature Grade | — | Commercial |
| Package Dimensions | — | [DATA_NEEDED: package dimensions] |