MPXH6300A6U vs MPXH6250A6T1 比較
詳細並排比較 MPXH6300A6U 由 STMicroelectronics 與 MPXH6250A6T1 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
STMicroelectronics
MPXH6300A6U - 20-304kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6300A6U ✓ 啟用中NXP Semiconductors
MPXH6250A6T1 - 20-250kPa Absolute Pressure Sensor | NXP/STMicro
MPXH6250A6T1 ✓ 啟用中規格比較
| 參數 | MPXH6300A6U | MPXH6250A6T1 |
|---|---|---|
| 品牌 | STMicroelectronics | NXP Semiconductors |
| 類別 | Pressure Sensors | Pressure Sensors |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 20 kPa to 304 kPa (2.9 PSI to 44.09 PSI) | 20 kPa to 250 kPa (2.9 PSI to 36.26 PSI) |
| 輸出電壓範圍 | 0.3 V to 4.9 V | 0.3 V to 4.9 V |
| Sensitivity | 16.2 mV/kPa (typical) | — |
| 供應電壓 | 4.74 V to 5.46 V (5.0 V nominal) | 4.74 V to 5.46 V (5 V typical) |
| 供應電流 | 10 mA (maximum) | — |
| 輸出類型 | Analog voltage, ratiometric to Vcc | Analog, ratiometric |
| 工作溫度 | -40 C to +125 C | — |
| Compensated Temperature Range | 0 C to 85 C | — |
| Accuracy | +/-1.5% VFSS (typical, over compensated range) | 1.5 % over 0 C to 85 C (datasheet typical) |
| 封裝 | 8-SOIC (0.295 inch / 7.50 mm wide body) | 8-SOIC (0.295 inch / 7.50 mm width) |
| 安裝類型 | Surface Mount | Surface Mount |
| Port Configuration | Single axial port, top side | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Technology | Piezoresistive MEMS with integrated ASIC | — |
| Response Time | [DATA_NEEDED: response time] | — |
| Pressure Hysteresis | [DATA_NEEDED: pressure hysteresis value] | — |
| RoHS 狀態 | Compliant | Compliant per NXP product page |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Full-Scale Span (typical) | — | 4.6 V |
| Supply Current (typical) | — | 5 mA |
| 工作溫度範圍 | — | [DATA_NEEDED: operating temperature range] |
| Port Style | — | Axial port (T1 suffix) |
| On-Chip Signal Conditioning | — | Yes (bipolar op-amp + thin-film trimming network) |
| Temperature Compensation | — | Yes (on-chip, calibrated) |
| Media Compatibility | — | Dry air / non-corrosive gases (T1 variant) |