PCM1796DBR vs PCM1795DBR 比較
詳細並排比較 PCM1796DBR 由 Texas Instruments 與 PCM1795DBR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | PCM1796DBR | PCM1795DBR |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Device Type | Stereo audio digital-to-analog converter (DAC) | — |
| 解析度 | 24 bit | — |
| Maximum Sampling Rate | 192 kHz | 200 kHz |
| DSD Support | Up to 200 kHz DSD | — |
| 通道數 | 2 (stereo) | — |
| DAC Architecture | Advanced segment DAC | Advanced segment |
| 輸出類型 | Balanced current output (differential) | — |
| Digital Interface | Serial 3-wire (LRCK, BCK, DATA) | — |
| Clock Jitter Tolerance | Improved tolerance to clock jitter (segment DAC architecture) | — |
| 功能特色 | Programmable gain; digital filtering; differential output | — |
| 封裝 | 28-lead SSOP (DBR), 208 mil | 28-pin SSOP |
| 安裝類型 | Surface Mount | Surface mount |
| RoHS 狀態 | Compliant | — |
| Analog Performance Measurement | System Two Cascade audio measurement system, averaging mode | — |
| SNR Measurement Condition | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted | — |
| Dynamic Range Measurement Condition | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted | — |
| Channel Separation Measurement Condition | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted | — |
| Process Technology | Monolithic CMOS integrated circuit | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| Total Harmonic Distortion plus Noise | [DATA_NEEDED: THD+N at 1 kHz, 0 dBFS] | — |
| Signal-to-Noise Ratio | [DATA_NEEDED: A-weighted SNR, 192 kHz, 0 dBFS] | — |
| Supply Voltage Range | [DATA_NEEDED: analog and digital supply voltage range] | — |
| Product Type | — | Stereo audio digital-to-analog converter (DAC) |
| DAC Resolution | — | 32 bit |
| Number of DAC Channels | — | 2 channels |
| Nominal PCM Sampling Rate | — | 192 kHz |
| DSD Playback Support | — | Up to 200 kHz |
| Analog Outputs | — | 2 balanced current outputs |
| Digital Control Interfaces | — | I2C, SPI, and TDMCA |
| Typical Signal-to-Noise Ratio | — | 123 dB |
| Typical Common-Mode Rejection | — | 123 dB |
| Analog Supply Voltage | — | 5 V for VCC1, VCC2L, and VCC2R |
| Digital Supply Voltage | — | 3.3 V for VDD |
| Manufacturer Test Sampling Rate | — | 48 kHz |
| Manufacturer Test System Clock | — | 256 fS |
| Manufacturer Test Data Width | — | 32 bit |
| Device Technology | — | CMOS monolithic integrated circuit |