PCM1796DBR vs PCM1795DBR 对比
详细并排对比 PCM1796DBR 出自 Texas Instruments 和 PCM1795DBR 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
规格对比
| 参数 | PCM1796DBR | PCM1795DBR |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | ADC/DAC | ADC/DAC |
| 生命周期状态 | 有效 | 有效 |
| Device Type | Stereo audio digital-to-analog converter (DAC) | — |
| 分辨率 | 24 bit | — |
| Maximum Sampling Rate | 192 kHz | 200 kHz |
| DSD Support | Up to 200 kHz DSD | — |
| 通道数 | 2 (stereo) | — |
| DAC Architecture | Advanced segment DAC | Advanced segment |
| 输出类型 | Balanced current output (differential) | — |
| Digital Interface | Serial 3-wire (LRCK, BCK, DATA) | — |
| Clock Jitter Tolerance | Improved tolerance to clock jitter (segment DAC architecture) | — |
| 特性 | Programmable gain; digital filtering; differential output | — |
| 封装 | 28-lead SSOP (DBR), 208 mil | 28-pin SSOP |
| 安装类型 | Surface Mount | Surface mount |
| RoHS 状态 | Compliant | — |
| Analog Performance Measurement | System Two Cascade audio measurement system, averaging mode | — |
| SNR Measurement Condition | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted | — |
| Dynamic Range Measurement Condition | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted | — |
| Channel Separation Measurement Condition | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted | — |
| Process Technology | Monolithic CMOS integrated circuit | — |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | — |
| Total Harmonic Distortion plus Noise | [DATA_NEEDED: THD+N at 1 kHz, 0 dBFS] | — |
| Signal-to-Noise Ratio | [DATA_NEEDED: A-weighted SNR, 192 kHz, 0 dBFS] | — |
| Supply Voltage Range | [DATA_NEEDED: analog and digital supply voltage range] | — |
| Product Type | — | Stereo audio digital-to-analog converter (DAC) |
| DAC Resolution | — | 32 bit |
| Number of DAC Channels | — | 2 channels |
| Nominal PCM Sampling Rate | — | 192 kHz |
| DSD Playback Support | — | Up to 200 kHz |
| Analog Outputs | — | 2 balanced current outputs |
| Digital Control Interfaces | — | I2C, SPI, and TDMCA |
| Typical Signal-to-Noise Ratio | — | 123 dB |
| Typical Common-Mode Rejection | — | 123 dB |
| Analog Supply Voltage | — | 5 V for VCC1, VCC2L, and VCC2R |
| Digital Supply Voltage | — | 3.3 V for VDD |
| Manufacturer Test Sampling Rate | — | 48 kHz |
| Manufacturer Test System Clock | — | 256 fS |
| Manufacturer Test Data Width | — | 32 bit |
| Device Technology | — | CMOS monolithic integrated circuit |