SN65LBC176DR vs SN65HVD07D 比較

詳細並排比較 SN65LBC176DR 由 Texas Instruments 與 SN65HVD07D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN65LBC176DR SN65LBC176DR - 10Mbps RS-485 Transceiver 5V | Texas Instruments

SN65LBC176DR - 10Mbps RS-485 Transceiver 5V | Texas Instruments

SN65LBC176DR ✓ 啟用中
Texas Instruments
SN65HVD07D SN65HVD07D - 1 Mbps RS-485 Transceiver | Texas Instruments

SN65HVD07D - 1 Mbps RS-485 Transceiver | Texas Instruments

SN65HVD07D ✓ 啟用中

規格比較

參數 SN65LBC176DR SN65HVD07D
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
單價 (USD) $1.27 —
功能 Half-duplex RS-485/RS-422 transceiver —
Signaling Rate 10 Mbps (max) —
供應電壓 5 V (nominal) —
Duplex Half —
Transmitters / Receivers 1 / 1 —
Protocol Compliance ANSI TIA/EIA-485 (RS-485), ISO 8482:1987 (E) —
Fault Protection -10 V to 15 V common-mode bus range —
Driver Enable DE, active-high —
Receiver Enable RE, active-low —
Technology LinBiCMOS, low skew —
工作溫度 -40C to +85C —
封裝 8-SOIC (D), 3.90 mm width 8-pin SOIC (D)
安裝類型 Surface Mount Surface mount
腳位數 8 —
Bus Loading Up to 32 unit loads (multipoint) —
RoHS 狀態 Compliant [DATA_NEEDED: RoHS status]
Product Type — RS-485 half-duplex transceiver
Transceiver Configuration — 1 transmitter / 1 receiver
Maximum Data Rate — 1 Mbps
Supply Voltage Range — 4.5 V to 5.5 V
Nominal Supply Voltage — 5 V
Communication Mode — Half duplex
Supported Standards — ANSI TIA/EIA-485-A and ISO 8482E
Driver Output State — Three-state differential output
Receiver Input — Differential input
Unit Load — 1/8 unit load
Maximum Bus Nodes — 256 nodes
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Output Slew Rate — Controlled
工作溫度範圍 — -40 °C to 85 °C
REACH Status — [DATA_NEEDED: REACH status]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價