SN65LBC176DR vs SN65HVD07D 비교
다음의 상세 나란히 비교: SN65LBC176DR 제조: Texas Instruments 및 SN65HVD07D 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SN65LBC176DR | SN65HVD07D |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 단가 (USD) | $1.27 | — |
| 기능 | Half-duplex RS-485/RS-422 transceiver | — |
| Signaling Rate | 10 Mbps (max) | — |
| 공급 전압 | 5 V (nominal) | — |
| Duplex | Half | — |
| Transmitters / Receivers | 1 / 1 | — |
| Protocol Compliance | ANSI TIA/EIA-485 (RS-485), ISO 8482:1987 (E) | — |
| Fault Protection | -10 V to 15 V common-mode bus range | — |
| Driver Enable | DE, active-high | — |
| Receiver Enable | RE, active-low | — |
| Technology | LinBiCMOS, low skew | — |
| 동작 온도 | -40C to +85C | — |
| 패키지 | 8-SOIC (D), 3.90 mm width | 8-pin SOIC (D) |
| 실장 유형 | Surface Mount | Surface mount |
| 핀 수 | 8 | — |
| Bus Loading | Up to 32 unit loads (multipoint) | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | RS-485 half-duplex transceiver |
| Transceiver Configuration | — | 1 transmitter / 1 receiver |
| Maximum Data Rate | — | 1 Mbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Communication Mode | — | Half duplex |
| Supported Standards | — | ANSI TIA/EIA-485-A and ISO 8482E |
| Driver Output State | — | Three-state differential output |
| Receiver Input | — | Differential input |
| Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Output Slew Rate | — | Controlled |
| 동작 온도 범위 | — | -40 °C to 85 °C |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |