SN75176BD vs SP485CN-L 比較
詳細並排比較 SN75176BD 由 Texas Instruments 與 SP485CN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | SN75176BD | SP485CN-L |
|---|---|---|
| 品牌 | Texas Instruments | MaxLinear |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Differential bus transceiver | — |
| 供應電壓 | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| 工作溫度範圍 | 0 °C to 70 °C | — |
| 封裝 | SOIC (D), 8 pins | 8-pin SOIC |
| 安裝類型 | Surface mount | Surface Mount |
| 腳位數 | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 5 Mbps |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| 靜態電流 | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Transceiver Type | — | Single transmitter/single receiver half-duplex transceiver |
| Supported Protocols | — | RS-422 and RS-485 |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Logic and Bus Function | — | Bidifferential half-duplex serial interface |
| Architecture | — | BiCMOS |
| Power Class | — | Low-power operation |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Temperature Range | — | 0 C to 70 C |
| Bus Topology | — | Half-duplex differential bus |
| Signaling | — | Differential RS-422/RS-485 |
| EMI Behavior | — | [DATA_NEEDED: slew-rate and transient-emission details] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Termination Requirement | — | [DATA_NEEDED: manufacturer termination and biasing guidance] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | not_applicable |