SN75176BD vs SP485CN-L 비교
다음의 상세 나란히 비교: SN75176BD 제조: Texas Instruments 및 SP485CN-L 제조: MaxLinear. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SN75176BD | SP485CN-L |
|---|---|---|
| 브랜드 | Texas Instruments | MaxLinear |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Differential bus transceiver | — |
| 공급 전압 | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| 동작 온도 범위 | 0 °C to 70 °C | — |
| 패키지 | SOIC (D), 8 pins | 8-pin SOIC |
| 실장 유형 | Surface mount | Surface Mount |
| 핀 수 | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 5 Mbps |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| 대기 전류 | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Transceiver Type | — | Single transmitter/single receiver half-duplex transceiver |
| Supported Protocols | — | RS-422 and RS-485 |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Logic and Bus Function | — | Bidifferential half-duplex serial interface |
| Architecture | — | BiCMOS |
| Power Class | — | Low-power operation |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Temperature Range | — | 0 C to 70 C |
| Bus Topology | — | Half-duplex differential bus |
| Signaling | — | Differential RS-422/RS-485 |
| EMI Behavior | — | [DATA_NEEDED: slew-rate and transient-emission details] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Termination Requirement | — | [DATA_NEEDED: manufacturer termination and biasing guidance] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | not_applicable |