THVD1400DR vs MAX3078EESA+ 比較
詳細並排比較 THVD1400DR 由 Texas Instruments 與 MAX3078EESA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Texas Instruments
THVD1400DR - 3.3-5V RS-485 Transceiver, 500Kbps, 8-SOIC | Texas Instruments
THVD1400DR ✓ 啟用中規格比較
| 參數 | THVD1400DR | MAX3078EESA+ |
|---|---|---|
| 品牌 | Texas Instruments | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 功能 | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Supply Voltage (VCC) | 3.0 V to 5.5 V | — |
| 資料速率 | 500 kbps (max) | — |
| Receiver Hysteresis | 50 mV (typ) | — |
| Bus Common-Mode Voltage | -7 V to +12 V | — |
| ESD Protection (Bus Pins, HBM) | ±16 kV | — |
| ESD Protection (Bus Pins, IEC 61000-4-2 Contact) | ±12 kV | — |
| Unit Load | 1/8 (256 nodes max) | — |
| 工作溫度 | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| 封裝 | 8-pin SOIC (SOIC-8, D suffix) | 8-pin SOIC |
| 安裝類型 | Surface Mount | Surface mount |
| RoHS 狀態 | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | Yes | — |
| Receiver Fail-Safe | Yes (open, short, idle bus) | — |
| Hot-Plug Support | Yes | — |
| 關機電流 | [DATA_NEEDED: shutdown current value] | — |
| Quiescent Current (typ) | [DATA_NEEDED: quiescent current value] | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Supply Voltage Range | — | 2.97V to 3.63V |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Interface Standards | — | RS-485 and RS-422 |
| ESD Protection | — | ±15kV |
| Fail-Safe Receiver | — | Logic-high output when receiver inputs are open or shorted |
| Hot-Swap Capability | — | Supported |
| Unloaded Supply Current | — | 800µA |
| Supply Current With Drivers Disabled | — | 800µA when fully loaded |
| DigiKey Listing Package | — | 8-SOIC |
| Manufacturer Product Status | — | PRODUCTION |
| Manufacturer Data Sheet Revision | — | Rev. 5 |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Differential Input Threshold | — | [DATA_NEEDED: differential input threshold] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |