AD521LDZ - 1000x Programmable Gain Instrumentation Amplifier | Analog Devices
MPN: AD521LDZ ✗ 停產AD521LDZ 概覽
An instrumentation amplifier is a differential analog signal-conditioning device used to amplify the voltage difference between two inputs while rejecting common-mode voltage and providing high input impedance. Within the broader signal-chain hierarchy, an instrumentation amplifier is an analog amplifier, an integrated circuit, and a precision measurement component. Its typical role is to condition low-level sensor outputs before conversion, display, or further signal processing.
The AD521 offers programmable gain settings covering the range up to 1000, allowing one circuit to serve multiple signal amplitudes. Its high CMRR reduces errors when the differential sensor signal is small relative to a common-mode voltage. Complete input protection supports power-on and power-off conditions, while the monolithic implementation reduces the component count compared with a discrete three-op-amp instrumentation-amplifier design.
The L grade emphasizes low drift and high linearity while operating from 0°C to +70°C. A 10 V/µs slew rate supports signal amplitudes and bandwidths above those of slow precision instrumentation amplifiers. The 14-CDIP package is intended for through-hole assembly and offers a practical option for industrial, laboratory, and legacy control systems that already use ceramic dual-inline package footprints.
Typical uses include bridge-transducer measurement, pressure and load-cell signal conditioning, biomedical instrumentation, current-loop sensing, and precision data-acquisition front ends. In each case, the AD521LDZ converts a small differential input into a larger single-ended voltage while attenuating common-mode interference. Designers must select the appropriate gain setting and confirm that input and output operating ranges do not clip the signal chain.
For reliable operation, use the manufacturer's specified supply voltage, gain-control logic, and output-settling conditions. Ceramic-DIP sockets and sockets with suitable contact resistance and insulation characteristics should be considered when field replacement or maintenance is important. Board layout should keep sensitive input traces short, separate from switching nodes and high-current return paths.
This page combines package, grade, gain, CMRR, drift, and application guidance with drop-in family alternatives and design-focused comparisons. It also organizes sourcing questions around the AD521LDZ while keeping the electrical distinctions between supported grade and package options visible for engineering review.
直接替換替代品,適用於 AD521LDZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD521LDZ (相同外形與佔位) — 差異在於 Temperature Grade, Mounting Type, Package, Product Type.
AD521KDZ
✅ 直接替換聯絡詢價
查看資料表 →AD521JDZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →AD521BDZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD521CDZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD521SDZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD521LDZ 最大額定值與電氣特性
| Device Type | Monolithic instrumentation amplifier |
| Number of Amplifier Circuits | 1 circuit |
| Programmable Gain | Up to 1000:1 |
| Common-Mode Rejection Ratio | 110 dB minimum |
| Maximum Input Drift, L Grade | 2 pV/°C maximum |
| Slew Rate | 10 V/µs |
| Temperature Grade | L grade |
| 工作溫度範圍 | 0°C to +70°C |
| Input Protection | Complete input protection at power-on and power-off |
| 封裝 | 14-CDIP, 0.300 in (7.62 mm) pitch |
| Packaging Type | Tube |
| 安裝類型 | Through-hole |
| Differential Input | Yes |
| Programmable Gain Control | Digital control |
AD521LDZ 14-cdip, 0.300 in (7.62 mm) pitch 腳位配置指南
AD521LDZ(14-cdip, 0.300 in (7.62 mm) pitch 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD521LDZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD521LDZ 適用於 6 應用s: Load-Cell and Bridge-Sensor Measurement, Precision Industrial Data Acquisition, Biomedical and Diagnostic Instrumentation, Current-Loop Sensor Conditioning, Laboratory and Instrumentation Signal Chains, Power and Motor Monitoring.
Load-Cell and Bridge-Sensor Measurement
The AD521LDZ is well suited to conditioning small differential bridge outputs because its programmable gain reaches 1000 and its CMRR is 110 dB minimum. The common-mode rejection helps prevent bridge excitation voltage from appearing as measurement error, while the L grade limits input drift to 2 pV/°C maximum over 0°C to +70°C. Place the device close to the bridge, use guarded input routing, and confirm that the selected gain and bridge excitation keep the output within the valid swing range.
推薦
Precision Industrial Data Acquisition
The AD521LDZ can serve as the analog front end for industrial data-acquisition systems carrying sensor voltages near the lower end of the ADC range. Programmable gain up to 1000 allows a designer to scale several transducer classes without changing the board, while 110 dB minimum CMRR improves rejection of shared supply and ground disturbances. The 0°C to +70°C L-grade specification is appropriate for many enclosure environments, but an extended-temperature grade is needed outside that range.
推薦
Biomedical and Diagnostic Instrumentation
The AD521LDZ fits low-level biomedical measurement chains where patient or physiological signals are differential and small relative to common-mode voltage. Its 110 dB minimum CMRR supports rejection of common-mode interference, and programmable gain up to 1000 allows amplification close to the sensor before cable noise and downstream conversion errors accumulate. The L grade's 2 pV/°C maximum drift supports temperature-stable measurements from 0°C to +70°C, subject to isolation, leakage, and safety requirements outside the amplifier itself.
推薦
Current-Loop Sensor Conditioning
The AD521LDZ can amplify the voltage generated by a current-to-voltage conversion element in a 4-20 mA instrumentation loop. Differential input architecture and 110 dB minimum CMRR help reject voltage shared by both input nodes, while programmable gain up to 1000 provides useful scaling for millivolt-level shunt voltages. Verify the input common-mode range against the loop voltage, maintain input impedance appropriate for the transmitter, and avoid excessive gain that could move the output outside its linear range.
推薦
Laboratory and Instrumentation Signal Chains
The AD521LDZ is useful in laboratory front ends that measure differential signals while presenting a controlled, amplified single-ended output to a data logger or display. Its programmable gain up to 1000 supports several input ranges, and the 10 V/µs slew rate provides useful speed for larger output transitions. The 14-CDIP format also simplifies use in educational, legacy, and hand-built instrumentation where a through-hole package and replaceable device are preferred over a fine-pitch surface-mount design.
推薦
Power and Motor Monitoring
The AD521LDZ can condition differential sensing elements used to monitor current, voltage, position, or vibration in power and motor systems. High CMRR reduces errors when sensing signals share a large common-mode voltage, while the gain range up to 1000 provides flexibility across sensor outputs. Keep the 0°C to +70°C operating rating in view, isolate sensitive routes from switching nodes, and verify that transients and surge conditions do not exceed the manufacturer's absolute maximum ratings.
推薦
推薦產品摘要
工程參考資料,適用於 AD521LDZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD521KDZ | AD521JDZ | AD521BDZ | AD521CDZ | AD521SDZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 14-CDIP (0.300 in, 7.62 mm pitch) | 14-CDIP (0.300 in, 7.62 mm pitch) | 14-CDIP (0.300 in, 7.62 mm pitch) | 14-CDIP (0.300 in, 7.62 mm pitch) | 14-CDIP (0.300 in, 7.62 mm pitch) | 14-CDIP (0.300 in, 7.62 mm pitch) |
| Device Type | Monolithic instrumentation amplifier | Monolithic instrumentation amplifier | Monolithic instrumentation amplifier | Monolithic instrumentation amplifier | Monolithic instrumentation amplifier | Monolithic instrumentation amplifier |
| Amplifier Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Programmable Gain | Up to 1000:1 | Up to 1000:1 | Up to 1000:1 | Up to 1000:1 | Up to 1000:1 | Up to 1000:1 |
主要差異化特點
- Lower-drift L-grade selection within the AD521 family (對比AD521KDZ)
- High common-mode rejection for differential measurements (對比AD521JDZ)
- Extended-temperature family path when environmental requirements exceed the L-grade range (對比AD521SDZ)
- Through-hole 14-CDIP footprint supports maintainable legacy instrumentation (對比AD521JDZ)
設計說明
Route the two differential inputs as a closely coupled pair and keep them away from switching-regulator outputs, relay contacts, motor phases, and high-current return paths. Connect the analog ground reference to the measurement system rather than allowing large ground-potential differences to develop across the input source. The manufacturer's pin-configuration and grounding guidance should be followed when assigning the 14-CDIP connections.
Programmable gain increases small-signal bandwidth but can also raise output noise and reduce usable output range. Select the lowest gain that provides the required signal span, check that the expected input and common-mode voltages remain within their limits, and confirm settling time at the selected gain before using the output in a precision acquisition system. Input shielding or guarding may be needed when source impedance is high.
Estimated: with a 12 V supply, a 5 V output, and a 10 mA load, the AD521LDZ would dissipate approximately 70 mW using P = (VIN − VOUT) × IOUT. This estimate does not include internal gain-control or bias-current effects. Keep the device within its 0°C to +70°C operating range and provide normal airflow around the 14-CDIP if surrounding circuitry raises the local ambient temperature.
Do not treat equal package dimensions as proof of exact electrical equivalence. The AD521LDZ is distinguished by its L-grade low-drift and high-linearity position, and substitution can alter input bias, offset, gain error, settling, and temperature behavior. Before replacing it with another AD521 grade, compare those parameters in the manufacturer data sheet and verify the power-on state of every gain-control input.
合規資訊
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified. AEC-Q100 is not applicable because this is a general-purpose instrumentation amplifier rather than an automotive-qualified device.