AD711TH - 4 MHz Precision BiFET Op Amp | Analog Devices
MPN: AD711TH ✗ 停產AD711TH 概覽
A BiFET operational amplifier is a voltage-amplifier built around a junction-field-effect-transistor input stage. In the product hierarchy, the AD711 is a precision op amp within the broader family of analog amplifiers and analog signal-chain integrated circuits. Compared with older precision BiFET amplifiers and many bipolar input amplifiers, its laser wafer trimming improves DC accuracy without requiring external offset adjustment.
The AD711TH's principal verified characteristics include a 4 MHz bandwidth, maximum input offset voltage of 500 uV, a JFET input stage, one amplifier circuit per package, and a hermetically sealed MBCY8 TO-99 configuration. These characteristics make the device useful where low input bias current, accurate zero-crossing behavior, and modest bandwidth requirements must coexist with low cost. The hermetic metal-can construction is also suited to controlled environmental and legacy instrumentation applications.
Because the AD711 is a high-speed precision amplifier, circuit design must account for the interaction between input capacitance, source impedance, and closed-loop bandwidth. Feedback resistors should be selected to limit parasitic capacitance and preserve phase margin. Decoupling near the device should minimize supply-to-output noise coupling, while grounding should follow the manufacturer's recommended return-path arrangement for the hermetic package.
Typical uses include precision instrumentation amplifiers, low-level sensor front ends, laboratory measurement equipment, audio and communications analog signal conditioning, feedback control loops, and active filters. The device can also serve as an upgrade path for aging designs that used older precision BiFET or bipolar op amps. Final suitability must be checked against supply voltage, output swing, load, noise, and stability requirements for the specific circuit.
When replacing the AD711TH, verify the pin assignment and null-trim provisions in the manufacturer's TO-99 pinout before layout reuse. Confirm that the alternative provides the required input bias current, offset voltage, drift, bandwidth, and output-current capability. A device with the same package outline is not automatically a drop-in replacement when its offset trim or electrical characteristics differ.
This page consolidates manufacturer documentation, distributor listing data, package details, and drop-in replacement guidance for the AD711TH. It adds application context, engineering design notes, and a structured comparison framework that helps engineers evaluate upgrades without relying only on a distributor part-number listing.
直接替換替代品,適用於 AD711TH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品AD711TH 最大額定值與電氣特性
| Product Type | Single-circuit precision operational amplifier |
| Amplifier Architecture | BiFET operational amplifier |
| Input Stage | JFET input |
| Gain-Bandwidth Product | 4 MHz |
| Maximum Input Offset Voltage | 500 uV |
| Number of Circuits | 1 circuit |
| Package Type | TO-99-8 hermetically sealed metal can |
| Package Designation | MBCY8 |
| 腳位數 | 8 pins |
| 安裝類型 | Through-hole |
| Offset Adjustment | Laser wafer trimming |
AD711TH mbcy8 腳位配置指南
AD711TH(mbcy8 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD711TH.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD711TH 適用於 6 應用s: Precision Sensor Signal Conditioning, Laboratory Measurement Instrumentation, Active Analog Filters, Audio and Communications Signal Paths, Industrial Process Control Loops, Legacy Test and Measurement Equipment.
Precision Sensor Signal Conditioning
The AD711TH suits precision sensor front ends because its JFET input stage avoids the higher input bias current commonly associated with bipolar transistor inputs, while the 500 uV maximum input offset rating supports low-level measurement accuracy. Place the amplifier close to the sensor and its compensation network to minimize parasitic pickup on high-impedance input nodes. The 4 MHz bandwidth provides ample closed-loop capability for moderate-frequency instrumentation signals without requiring a high-speed precision architecture. Verify the actual bias current, noise density, common-mode range, and temperature drift against the sensor output before releasing the design.
Laboratory Measurement Instrumentation
The AD711TH is appropriate for laboratory measurement circuits that need accurate DC behavior and more bandwidth than a general-purpose slow op amp. It can form the gain stage of a buffered measurement chain, active filter, or precision reference-feedback amplifier. Its single JFET input and laser-trimmed offset characteristics support repeatable readings, while the hermetically sealed TO-99 metal can suits legacy instrument architecture. Keep input leads short, provide local supply bypassing, and include offset-trim access when calibration is required. Confirm noise and stability with the complete sensor, cable, and source impedance rather than evaluating the amplifier alone.
Active Analog Filters
The AD711TH can be used in first- and second-order active filters where a 4 MHz gain-bandwidth product is sufficient for the signal band. Its low-offset JFET-input architecture is advantageous when filtering low-level signals because static offset directly shifts the filtered result. Select feedback and input resistors to limit parasitic capacitance and maintain the intended gain-bandwidth relationship. Place the filter's compensation capacitors close to their associated pins and avoid routing sensitive nodes beside high-current switching paths. Confirm the actual noise, gain accuracy, and phase margin in simulation because amplifier and resistor parasitics can alter the filter response.
Audio and Communications Signal Paths
The AD711TH can support modest-frequency audio and communications analog signal paths where low offset and a JFET input are more important than very high slew rate or rail-to-rail output capability. It can buffer a line-level stage, provide gain around a transducer, or form an active equalizer section. The 4 MHz bandwidth gives considerable margin over audio-band requirements, but the selected supply and operating point still determine output swing and headroom. Keep the signal trace short, use stable feedback values, and bypass the supply pins locally. Validate distortion, noise, and channel behavior in the complete analog chain.
Industrial Process Control Loops
The AD711TH is usable in analog process-control feedback loops where a low-offset single-amplifier stage is required and the loop bandwidth remains well below the device's 4 MHz capability. The JFET input stage suits high-impedance control nodes, while the hermetic TO-99 package can fit established industrial instrument boards with through-hole layouts. Keep the error-amplifier input and feedback components compact to reduce noise pickup, and route the return path directly to the device ground connection. Confirm supply voltage, output current, common-mode limits, and temperature range against the plant interface before deployment.
Legacy Test and Measurement Equipment
The AD711TH is a natural fit for upgrading aging precision test equipment that originally used older BiFET or bipolar input amplifiers. The 4 MHz bandwidth, maximum 500 uV offset rating, and laser-trimmed construction provide a modern accuracy-focused alternative while preserving the low-cost architecture of the AD711 family. When replacing an existing device, verify lead numbering, offset-null wiring, case grounding, and supply polarity against the AD711 datasheet. Recalibrate offset and gain after substitution, and verify noise and temperature drift across the specified measurement range.
工程參考資料,適用於 AD711TH — 比較、設計指引及合規資訊。
選型指南
Before approving a replacement, verify pin numbering, offset-null connections, case grounding, supply range, common-mode range, bias current, slew rate, output-current capability, noise, and temperature drift. A generic precision op amp with a similar bandwidth may still require a board redesign or fail to drive the intended load. For production use, request the current commercial status and lot-specific details through the Request a Quote form on this page.
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Analog Devices |
| Package | TO-99-8 hermetically sealed metal can |
| Number of Pins | 8 pins |
| Number of Circuits | 1 circuit |
| Input Stage | JFET input |
| Gain-Bandwidth Product | 4 MHz |
| Maximum Input Offset Voltage | 500 uV |
| Mounting Type | Through-hole |
主要差異化特點
- Combines precision offset performance with 4 MHz bandwidth (對比AD711 order-code variants with lower bandwidth)
- Laser-trimmed JFET-input precision amplifier (對比Older precision bipolar-input amplifier designs)
- Hermetically sealed legacy-compatible construction (對比Surface-mount precision amplifier alternatives)
設計說明
Keep the AD711TH inverting-input node, offset-trim network, and feedback components physically compact because parasitic capacitance at a high-impedance input can reduce closed-loop bandwidth and phase margin. Route input and feedback traces away from switching-node copper and keep the device return connection short. Use the manufacturer's TO-99 pinout and application guidance when establishing the ground and case-connection arrangement.
The 4 MHz gain-bandwidth product requires a stability review of the complete amplifier stage. Include source impedance, load capacitance, feedback resistance, and the amplifier's internal capacitance in simulation. If additional compensation is required, follow the guidance in the AD711 datasheet rather than adding an arbitrary capacitor at the input, which can worsen noise pickup and settling behavior.
Do not treat the AD711TH as a modern rail-to-rail, surface-mount amplifier. The TO-99-8 device requires a through-hole layout, and the usable output swing, supply range, input common-mode range, and thermal limits depend on the selected operating point. Also verify the offset-null pinout before connecting trim components; an incorrect null connection can prevent calibration or damage the adjustment path.
Place local supply-bypass capacitors at the amplifier pins and keep supply return current out of sensitive input and feedback paths. Because this is a precision, low-cost amplifier rather than a micropower device, evaluate the supply quiescent-current demand in the overall power budget. Confirm the actual operating and maximum supply voltages in the AD711 datasheet for the exact order code.
合規資訊
The AD711 is a legacy hermetically sealed TO-99 operational amplifier. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the retrieved product listings and must be confirmed for the exact order code.