Analog Devices

AD711TH - 4 MHz Precision BiFET Op Amp | Analog Devices

N.º de pieza: AD711TH ✗ Fin de vida
500 uV Vdss TO-99-8 hermetically sealed metal can Package
MOQ: 1 |

AD711TH Descripción general

The Analog Devices AD711TH is a high-speed, precision, single-circuit BiFET operational amplifier supplied in an 8-pin hermetically sealed TO-99 metal-can package. It combines a 4 MHz gain-bandwidth product with an input offset voltage rated up to 500 uV, making it suitable for precision signal-conditioning, instrumentation, and analog-control circuits. The laser-trimmed monolithic design provides low offset voltage and low offset-voltage drift.

A BiFET operational amplifier is a voltage-amplifier built around a junction-field-effect-transistor input stage. In the product hierarchy, the AD711 is a precision op amp within the broader family of analog amplifiers and analog signal-chain integrated circuits. Compared with older precision BiFET amplifiers and many bipolar input amplifiers, its laser wafer trimming improves DC accuracy without requiring external offset adjustment.

The AD711TH's principal verified characteristics include a 4 MHz bandwidth, maximum input offset voltage of 500 uV, a JFET input stage, one amplifier circuit per package, and a hermetically sealed MBCY8 TO-99 configuration. These characteristics make the device useful where low input bias current, accurate zero-crossing behavior, and modest bandwidth requirements must coexist with low cost. The hermetic metal-can construction is also suited to controlled environmental and legacy instrumentation applications.

Because the AD711 is a high-speed precision amplifier, circuit design must account for the interaction between input capacitance, source impedance, and closed-loop bandwidth. Feedback resistors should be selected to limit parasitic capacitance and preserve phase margin. Decoupling near the device should minimize supply-to-output noise coupling, while grounding should follow the manufacturer's recommended return-path arrangement for the hermetic package.

Typical uses include precision instrumentation amplifiers, low-level sensor front ends, laboratory measurement equipment, audio and communications analog signal conditioning, feedback control loops, and active filters. The device can also serve as an upgrade path for aging designs that used older precision BiFET or bipolar op amps. Final suitability must be checked against supply voltage, output swing, load, noise, and stability requirements for the specific circuit.

When replacing the AD711TH, verify the pin assignment and null-trim provisions in the manufacturer's TO-99 pinout before layout reuse. Confirm that the alternative provides the required input bias current, offset voltage, drift, bandwidth, and output-current capability. A device with the same package outline is not automatically a drop-in replacement when its offset trim or electrical characteristics differ.

This page consolidates manufacturer documentation, distributor listing data, package details, and drop-in replacement guidance for the AD711TH. It adds application context, engineering design notes, and a structured comparison framework that helps engineers evaluate upgrades without relying only on a distributor part-number listing.

Alternativas directas para AD711TH — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con AD711TH (mismo factor de forma y huella).

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

AD711TH Valores máximos y características eléctricas

Product Type Single-circuit precision operational amplifier
Amplifier Architecture BiFET operational amplifier
Input Stage JFET input
Gain-Bandwidth Product 4 MHz
Maximum Input Offset Voltage 500 uV
Number of Circuits 1 circuit
Package Type TO-99-8 hermetically sealed metal can
Package Designation MBCY8
Número de pines 8 pins
Tipo de montaje Through-hole
Offset Adjustment Laser wafer trimming

Guía de configuración de pines de AD711TH mbcy8

Configuración de pines para AD711TH (encapsulado mbcy8). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado mbcy8 para AD711TH

No hay datos detallados de patillaje disponibles para AD711TH.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD711TH es adecuado para 6 aplicacións: Precision Sensor Signal Conditioning, Laboratory Measurement Instrumentation, Active Analog Filters, Audio and Communications Signal Paths, Industrial Process Control Loops, Legacy Test and Measurement Equipment.

🏭

Precision Sensor Signal Conditioning

The AD711TH suits precision sensor front ends because its JFET input stage avoids the higher input bias current commonly associated with bipolar transistor inputs, while the 500 uV maximum input offset rating supports low-level measurement accuracy. Place the amplifier close to the sensor and its compensation network to minimize parasitic pickup on high-impedance input nodes. The 4 MHz bandwidth provides ample closed-loop capability for moderate-frequency instrumentation signals without requiring a high-speed precision architecture. Verify the actual bias current, noise density, common-mode range, and temperature drift against the sensor output before releasing the design.

🖥️

Laboratory Measurement Instrumentation

The AD711TH is appropriate for laboratory measurement circuits that need accurate DC behavior and more bandwidth than a general-purpose slow op amp. It can form the gain stage of a buffered measurement chain, active filter, or precision reference-feedback amplifier. Its single JFET input and laser-trimmed offset characteristics support repeatable readings, while the hermetically sealed TO-99 metal can suits legacy instrument architecture. Keep input leads short, provide local supply bypassing, and include offset-trim access when calibration is required. Confirm noise and stability with the complete sensor, cable, and source impedance rather than evaluating the amplifier alone.

🎛️

Active Analog Filters

The AD711TH can be used in first- and second-order active filters where a 4 MHz gain-bandwidth product is sufficient for the signal band. Its low-offset JFET-input architecture is advantageous when filtering low-level signals because static offset directly shifts the filtered result. Select feedback and input resistors to limit parasitic capacitance and maintain the intended gain-bandwidth relationship. Place the filter's compensation capacitors close to their associated pins and avoid routing sensitive nodes beside high-current switching paths. Confirm the actual noise, gain accuracy, and phase margin in simulation because amplifier and resistor parasitics can alter the filter response.

🎧

Audio and Communications Signal Paths

The AD711TH can support modest-frequency audio and communications analog signal paths where low offset and a JFET input are more important than very high slew rate or rail-to-rail output capability. It can buffer a line-level stage, provide gain around a transducer, or form an active equalizer section. The 4 MHz bandwidth gives considerable margin over audio-band requirements, but the selected supply and operating point still determine output swing and headroom. Keep the signal trace short, use stable feedback values, and bypass the supply pins locally. Validate distortion, noise, and channel behavior in the complete analog chain.

⚙️

Industrial Process Control Loops

The AD711TH is usable in analog process-control feedback loops where a low-offset single-amplifier stage is required and the loop bandwidth remains well below the device's 4 MHz capability. The JFET input stage suits high-impedance control nodes, while the hermetic TO-99 package can fit established industrial instrument boards with through-hole layouts. Keep the error-amplifier input and feedback components compact to reduce noise pickup, and route the return path directly to the device ground connection. Confirm supply voltage, output current, common-mode limits, and temperature range against the plant interface before deployment.

🔧

Legacy Test and Measurement Equipment

The AD711TH is a natural fit for upgrading aging precision test equipment that originally used older BiFET or bipolar input amplifiers. The 4 MHz bandwidth, maximum 500 uV offset rating, and laser-trimmed construction provide a modern accuracy-focused alternative while preserving the low-cost architecture of the AD711 family. When replacing an existing device, verify lead numbering, offset-null wiring, case grounding, and supply polarity against the AD711 datasheet. Recalibrate offset and gain after substitution, and verify noise and temperature drift across the specified measurement range.

What is the AD711TH and what is its key specification?
The AD711TH is a single-circuit, high-speed precision BiFET operational amplifier from Analog Devices with a 4 MHz gain-bandwidth product and an input offset voltage rated up to 500 uV. It is offered in an 8-pin hermetically sealed TO-99 metal-can package. Analog Devices describes the AD711 family as a low-cost precision amplifier whose laser wafer trimming provides low offset voltage and low offset-voltage drift.
Where can I download the AD711 datasheet PDF?
The official AD711 datasheet PDF is available from Analog Devices at the manufacturer's technical-document URL listed on this page. It is the primary reference for the AD711 family electrical characteristics, pin configuration, offset-trim connections, application examples, and ordering information. Use the AD711TH order-code entry to confirm that the TO-99-8 hermetic variant matches the intended supply, temperature, and test-screening requirements.
Where can I find the AD711TH pinout?
The AD711TH pinout is shown in the AD711 manufacturer datasheet under the pin-configuration and ordering information. The TH device uses an 8-pin TO-99 hermetically sealed metal-can package, also identified as MBCY8. Before wiring a replacement or inspecting an existing board, follow the datasheet numbering and pay particular attention to the offset-null connections, supply terminals, and the case-connection arrangement.
What are the key specifications of AD711TH that engineers should know?
The principal AD711TH characteristics are a 4 MHz gain-bandwidth product, input offset voltage up to 500 uV, a JFET input stage, one amplifier circuit, and an 8-pin hermetically sealed TO-99 metal-can package. Analog Devices also identifies laser wafer trimming as the mechanism behind the family's low offset voltage and offset-voltage drift. Supply range, bias current, slew rate, and temperature limits should be confirmed from the family datasheet.
Is the AD711TH suitable for precision instrumentation applications?
Yes, the AD711TH is suitable for precision instrumentation when its 500 uV maximum offset rating, JFET input stage, and 4 MHz bandwidth meet the circuit requirements. It can be used in low-level sensor amplifiers, measurement front ends, and precision feedback networks. Confirm input bias current, common-mode range, noise, and temperature drift against the required accuracy before finalizing the design.
Can the AD711TH replace an older precision BiFET op amp?
The AD711TH can serve as an upgrade candidate for older precision BiFET and bipolar op amps because Analog Devices specifically positions the AD711 for that transition. A valid replacement still requires identical TO-99-8 lead assignment, suitable supply voltage, acceptable output swing and load current, and compatible offset-null wiring. Verify stability, noise, bias current, and temperature behavior in the target circuit rather than relying only on the package.
What can replace the AD711TH?
A valid AD711TH replacement must be pin-to-pin compatible in the 8-pin TO-99-8 package and must satisfy the same critical electrical roles: offset accuracy, JFET input bias current, 4 MHz-class bandwidth, supply range, output swing, and offset-adjustment connections. Cross-reference searches identify multiple pin-to-pin candidates for the AD711 family, but each exact MPN should be checked against its manufacturer datasheet before it is treated as a drop-in replacement.
Is the AD711TH the same as the AD711?
The AD711TH is an orderable variant of the AD711 family rather than a functionally different amplifier architecture. The listed AD711TH configuration is a single JFET-input amplifier in an 8-pin hermetically sealed TO-99 metal can, designated MBCY8. Exact supply grade, temperature range, and screening can vary by order code, so compare the ordering table when substituting one AD711 variant for another.
Where can I buy AD711TH online and request a quote?
Use the Request a Quote form on this page to ask for AD711TH availability, order quantity, and current commercial terms. The form provides a direct route for confirming stock status, minimum order quantity, and lead time without relying on stale listing information. Specify the complete AD711TH order code and the required quantity in the request so the supply configuration can be matched correctly.
What is the lead time for AD711TH?
The current lead time for AD711TH should be confirmed through the Request a Quote form on this page. Lead time can vary with quantity, manufacturing status, and whether the order includes additional screening or grade requirements. For a production build, request the quantity schedule and any required traceability information along with the quotation so the exact AD711TH configuration is covered.
Is AD711TH currently in stock?
Current AD711TH stock status should be confirmed through the Request a Quote form on this page. A distributor listing may show a cached availability state, but that state can change without notice and may not reflect the requested quantity or package condition. Include your required quantity, target date, and any screening requirements in the request for a meaningful availability response.
How do I design a stable gain stage around the AD711TH?
Build the AD711TH gain stage around the feedback network specified in the manufacturer's application guidance, then verify stability with the actual source impedance and load. Pay attention to parasitic capacitance at the inverting input and to total feedback resistance, since both influence closed-loop bandwidth and phase margin. Decouple the supply pins close to the device and evaluate the noise and offset contribution of the external resistor network.
How should the AD711TH be mounted and decoupled?
The AD711TH is a through-hole device in a hermetically sealed TO-99-8 metal can, so its mechanical installation differs from modern surface-mount amplifiers. Follow the package outline and lead dimensions shown in the manufacturer datasheet, and observe the specified operating temperature range and any thermal constraints. Place supply bypass capacitors close to the relevant pins and keep sensitive input and feedback traces short and away from switching nodes.
What is the best Texas Instruments equivalent for the AD711TH?
The AD711TH should be matched first by package, pinout, input bias current, offset voltage, bandwidth, supply range, and offset-trim function. A Texas Instruments part with a similar gain-bandwidth value is not necessarily a drop-in replacement if its input stage or pin assignment differs. Use the manufacturer's cross-reference search with the exact AD711TH requirements, then verify every pin and the null-trim connection against both datasheets.
AD711TH versus AD711JH - which package should I choose?
The AD711TH is identified as an 8-pin hermetically sealed TO-99 metal-can device, while other AD711 order codes use different package or screening arrangements. Choose TH only when its hermetic TO-99-8 construction, pin configuration, and ordering attributes satisfy the mechanical and environmental requirements of the assembly. For a direct comparison, align package drawing, lead numbering, temperature grade, supply range, and offset-adjustment wiring.

Datos de referencia de ingeniería para AD711TH — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AD711TH when the circuit needs a precision JFET-input amplifier with a gain-bandwidth product of 4 MHz, an input offset voltage up to 500 uV, and an 8-pin hermetically sealed TO-99 footprint. It is particularly appropriate for legacy through-hole instrumentation, low-level sensor conditioning, active filters, and precision feedback loops where package continuity is valuable. Do not choose it when the design requires a surface-mount footprint, rail-to-rail input or output operation, or operation outside the family datasheet's supply and temperature limits.

Before approving a replacement, verify pin numbering, offset-null connections, case grounding, supply range, common-mode range, bias current, slew rate, output-current capability, noise, and temperature drift. A generic precision op amp with a similar bandwidth may still require a board redesign or fail to drive the intended load. For production use, request the current commercial status and lot-specific details through the Request a Quote form on this page.

Comparación con alternativas

Parámetro Este producto
Brand Analog Devices
Package TO-99-8 hermetically sealed metal can
Number of Pins 8 pins
Number of Circuits 1 circuit
Input Stage JFET input
Gain-Bandwidth Product 4 MHz
Maximum Input Offset Voltage 500 uV
Mounting Type Through-hole

Diferenciadores clave

  • Combines precision offset performance with 4 MHz bandwidth (frente a AD711 order-code variants with lower bandwidth)
  • Laser-trimmed JFET-input precision amplifier (frente a Older precision bipolar-input amplifier designs)
  • Hermetically sealed legacy-compatible construction (frente a Surface-mount precision amplifier alternatives)

Notas de diseño

Keep the AD711TH inverting-input node, offset-trim network, and feedback components physically compact because parasitic capacitance at a high-impedance input can reduce closed-loop bandwidth and phase margin. Route input and feedback traces away from switching-node copper and keep the device return connection short. Use the manufacturer's TO-99 pinout and application guidance when establishing the ground and case-connection arrangement.

The 4 MHz gain-bandwidth product requires a stability review of the complete amplifier stage. Include source impedance, load capacitance, feedback resistance, and the amplifier's internal capacitance in simulation. If additional compensation is required, follow the guidance in the AD711 datasheet rather than adding an arbitrary capacitor at the input, which can worsen noise pickup and settling behavior.

Do not treat the AD711TH as a modern rail-to-rail, surface-mount amplifier. The TO-99-8 device requires a through-hole layout, and the usable output swing, supply range, input common-mode range, and thermal limits depend on the selected operating point. Also verify the offset-null pinout before connecting trim components; an incorrect null connection can prevent calibration or damage the adjustment path.

Place local supply-bypass capacitors at the amplifier pins and keep supply return current out of sensitive input and feedback paths. Because this is a precision, low-cost amplifier rather than a micropower device, evaluate the supply quiescent-current demand in the overall power budget. Confirm the actual operating and maximum supply voltages in the AD711 datasheet for the exact order code.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The AD711 is a legacy hermetically sealed TO-99 operational amplifier. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the retrieved product listings and must be confirmed for the exact order code.

Datos verificados el: 2026-11-18 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

ad711 datasheet AD711TH datasheet AD711TH pinout AD711TH TO-99-8 AD711TH specifications AD711TH 4 MHz op amp AD711TH equivalent AD711TH replacement AD711TH drop-in replacement AD711TH price AD711TH stock Analog Devices AD711TH

Componentes & términos relacionados

Analog Devices AD711 AD711TH precision operational amplifier BiFET operational amplifier JFET input stage laser wafer trimming gain-bandwidth product input offset voltage offset voltage drift input bias current active filter precision instrumentation sensor signal conditioning laboratory measurement equipment process control TO-99-8 MBCY8 hermetic metal can through-hole package 4 MHz 500 uV single-circuit amplifier
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ