Analog Devices

AD843SH - 34MHz CBFET Op Amp | Analog Devices

MPN: AD843SH ✓ 啟用中
-18 V to +18 V Vdss 0.6 nA Id TO-8-12 metal-can package Package
MOQ: 1 |

AD843SH 概覽

The Analog Devices AD843SH is a fast-settling, 34 MHz CBFET-input operational amplifier with 0.6 nA input bias current, 135 ns settling time to within 0.01% of final value for a 10 V step, and a TO-8-12 metal-can package. The device operates from -18 V to +18 V and is specified across -55°C to +125°C, making it suitable for precision, high-speed, and temperature-extreme analog signal chains.

A CBFET-input operational amplifier is a voltage-feedback amplifier whose field-effect-transistor input stage provides very low input bias current while retaining wide signal bandwidth. This input architecture places the AD843 in the operational-amplifier hierarchy, where low bias current reduces disturbance in high-impedance sources while the amplifier provides gain, buffering, filtering, or level shifting.

Key characteristics include a 34 MHz gain-bandwidth product, 135 ns settling time, 19 nV/√Hz input noise at 10 kHz, 250 V/µs slew rate, and 72 dB nominal common-mode rejection. Built-in compensation simplifies implementation, while the specified 2 µV/°C input-offset temperature coefficient supports stable operation over wide ambient-temperature ranges.

The AD843's fast settling behavior is particularly important when a large input step must settle accurately before a subsequent sampling or conversion event. Its 10 V settling specification provides a clear, application-relevant criterion for evaluating acquisition systems. The CBFET input stage also supports use with high-impedance transducers where low input current is important, although the complete external circuit must still satisfy the amplifier's stability and loading requirements.

Typical uses include precision pulse acquisition, high-speed instrumentation, photodiode and capacitance measurement front ends, waveform conditioning, and industrial or military test equipment. The -55°C to +125°C range makes the AD843SH appropriate where temperature variation must be considered, while its high-voltage, wide-bandwidth characteristics suit bipolar signal conditioning.

PCB implementation should preserve short feedback paths and minimize parasitic capacitance around the high-impedance input nodes. Decoupling capacitors should be placed close to the supply pins, and unused or unused-function pins should be handled according to the manufacturer datasheet. Adequate input and output headroom must be checked at temperature because the 135 ns settling specification is not a substitute for stable operating conditions.

This page combines the manufacturer's AD843 family specifications with package details, thermal-range information, application guidance, and verified drop-in replacement analysis. The comparison material is intended to support schematic review, footprint verification, and procurement planning rather than replacing the complete manufacturer datasheet.

直接替換替代品,適用於 AD843SH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

AD843SH 最大額定值與電氣特性

Amplifier Type Fast-settling voltage-feedback operational amplifier
Input Stage CBFET input
Gain-Bandwidth Product 34 MHz
Settling Time 135 ns to within 0.01% of final value for a 10 V step
Input Bias Current 0.6 nA
Supply Voltage Range -18 V to +18 V
工作溫度範圍 -55°C to +125°C
Input Noise Density 19 nV/√Hz at 10 kHz
Maximum Input Offset Voltage 4.5 mV
Slew Rate 250 V/µs
Input Offset Temperature Coefficient 2 µV/°C
Input Current 600 pA
Common-Mode Rejection Ratio 72 dB nominal
Compensation Built-in compensation
封裝 TO-8-12 metal-can package
腳位數 12 pins
RoHS 狀態 Compliant

AD843SH to-8-12 metal-can package 腳位配置指南

AD843SH(to-8-12 metal-can package 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

AD843SH 的 to-8-12 metal-can package 封裝腳位圖

無詳細腳位定義資料: AD843SH.

請參閱 資料表 以查看完整腳位配置。

典型應用

AD843SH 適用於 6 應用s: High-Speed Pulse Acquisition, Photodiode Signal Conditioning, Precision Waveform Conditioning, Capacitance Measurement Front End, Industrial Test and Measurement, Military and Aerospace Signal Conditioning.

📡

High-Speed Pulse Acquisition

The AD843SH fits pulse-acquisition front ends that must recover rapidly after a large input transition. Its 34 MHz gain-bandwidth product and 135 ns settling time to within 0.01% of final value for a 10 V step allow the amplifier to establish an accurate output level before the next sampling decision. The 250 V/µs slew rate limits large-signal distortion during abrupt edges. Place the amplifier close to the source and acquisition device, use short feedback traces, and confirm that source capacitance remains within the stability requirements of the AD843 family.

🧩

Photodiode Signal Conditioning

The AD843SH is suitable for photodiode amplifiers because its 0.6 nA input bias current places a small DC load on a high-impedance detector. Its 34 MHz bandwidth supports higher-bandwidth optical measurement signals, while the 135 ns settling specification can help the output settle quickly between acquisition events. Biasing resistors, diode capacitance, input guarding, and leakage current must still be evaluated because the amplifier specification alone does not determine total system noise or usable signal bandwidth.

📺

Precision Waveform Conditioning

The AD843SH can condition bipolar waveforms in instrumentation where rapid acquisition and accurate large-signal recovery are important. Its -18 V to +18 V supply range provides useful headroom for positive and negative signal swings, and the 250 V/µs slew rate helps preserve square or pulse waveforms. The 72 dB nominal common-mode rejection reduces disturbance from common-mode signals, although layout and source impedance remain important for achieving the expected system performance.

🏭

Capacitance Measurement Front End

The AD843SH is appropriate for capacitive sensor front ends that benefit from low input bias current and fast settling. Its 0.6 nA bias current limits one source of error at the sensing node, and its 34 MHz bandwidth can accommodate higher-frequency capacitance changes. The design should minimize parasitic capacitance around the input, provide adequate guarding, and verify compensation with the actual sensor and cable. Excessively high source or loop capacitance can reduce stability even when the amplifier's headline bandwidth is sufficient.

🏭

Industrial Test and Measurement

The AD843SH supports industrial instrumentation requiring a wide operating-temperature range and rapid response. The -55°C to +125°C specification supports deployments across wide ambient conditions, while the 135 ns settling behavior helps repeated measurements settle between stimulus events. For factory or laboratory equipment, use the specified operating supply range and temperature limits, account for offset drift through the 2 µV/°C coefficient, and provide stable reference and excitation circuitry.

✈️

Military and Aerospace Signal Conditioning

The AD843SH's -55°C to +125°C operating range makes it suitable for temperature-extreme signal-conditioning applications. Its CBFET input stage provides 0.6 nA bias current, while the 34 MHz bandwidth and 135 ns settling time address fast transient signals. Qualification for a particular aerospace or defense program still requires the applicable procurement documentation, traceability, and screening requirements. Circuit designers should verify supply tolerances, grounding, component derating, and environmental constraints independently.

推薦產品摘要

AD8139ACPZ Related high-speed differential ADC driver for comparison 用於: High-Speed Pulse Acquisition, Capacitance Measurement Front End, Military and Aerospace Signal Conditioning ADA4899-1YCPZ Related low-noise voltage-feedback amplifier for design comparison 用於: Photodiode Signal Conditioning OPA177 Precision amplifier option for comparison in redesigned circuits 用於: Precision Waveform Conditioning, Industrial Test and Measurement
What is the bandwidth and settling time of the AD843SH?
The AD843SH provides a 34 MHz gain-bandwidth product and settles to within 0.01% of its final value in 135 ns after a 10 V input step. These two specifications make it suitable for wide-band signal conditioning where the circuit must recover quickly after a large transient. According to the Analog Devices AD843 manufacturer datasheet, the fast-settling CBFET architecture combines wide bandwidth with low input bias current.
Why is the CBFET input stage important in the AD843SH?
The CBFET input stage gives the AD843SH a low input bias current of 0.6 nA while preserving 34 MHz bandwidth. Low input current reduces the load presented to high-impedance sensors and can simplify DC biasing in precision measurement circuits. The Analog Devices AD843 manufacturer datasheet identifies the AD843 as a CBFET-input operational amplifier intended for high-speed, low-input-current applications.
What supply voltage range does the AD843SH operate from?
The AD843SH operates from -18 V to +18 V, giving it a 36 V total supply span. The bipolar operating range supports positive and negative signal excursions in instrumentation and waveform-conditioning systems. The Analog Devices AD843 manufacturer datasheet also specifies an operating temperature range of -55°C to +125°C for the AD843SH grade.
Where can I download the AD843SH datasheet PDF?
The official AD843SH datasheet PDF is available from the Analog Devices technical-document page at https://www.analog.com/media/en/technical-documentation/data-sheets/AD843.pdf. The document contains the AD843 family electrical characteristics, package information, pin descriptions, and application guidance. Use the manufacturer PDF for design sign-off because it is the controlling technical source for the device.
Where can I find the AD843SH pinout?
The AD843SH pinout is shown in the pin-description section of the official Analog Devices AD843 datasheet at https://www.analog.com/media/en/technical-documentation/data-sheets/AD843.pdf. The AD843SH uses a 12-pin TO-8-12 metal-can package. Use the pin-description table when assigning signal, feedback, supply, and ground connections on a new layout.
Is the AD843SH suitable for precision measurement systems?
The AD843SH is suitable for precision measurement systems that require low input bias current and rapid settling. Its 0.6 nA input bias current, 19 nV/√Hz input noise density at 10 kHz, 135 ns settling time, and 2 µV/°C offset coefficient are directly relevant to high-impedance acquisition stages. The Analog Devices AD843 manufacturer datasheet supports these electrical characteristics, while the final system noise must also account for resistor and reference contributions.
Where can I buy AD843SH online and check current availability?
Use the Request a Quote form on this page to request AD843SH price, stock, quantity, and delivery information. The form provides a direct way to confirm the exact AD843SH ordering option without relying on an unqualified generic listing. Quote requests should state the required quantity, target package suffix, and any RoHS or sourcing documentation required by the project.
What is the current price of AD843SH?
Current AD843SH pricing is not shown as a fixed catalog value because commercial terms can change with quantity, availability, and package handling requirements. Submit a Request a Quote request on this page for the exact AD843SH configuration and current commercial response. Do not use the historical last-known price as a guaranteed present-day quotation.
What is the lead time for AD843SH?
The current AD843SH lead time must be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package suffix, manufacturing status, and procurement conditions. Provide the required quantity and target date in the request so the supplier can return a delivery commitment for the exact AD843SH orderable configuration.
Is AD843SH in stock?
Use the Request a Quote form on this page for a current AD843SH stock check. Availability should be confirmed against the exact suffix, quantity, and delivery date required by the build. The manufacturer's AD843 family page remains the primary source for product and lifecycle information.
AD843SH vs OPA671AP - which is better for a fast-settling amplifier?
The AD843SH is the better-supported choice when the design specifically requires its 34 MHz bandwidth, 135 ns settling time, 0.6 nA input bias current, and TO-8-12 mechanical format. OPA671AP appears in a public comparison listing, but its package and electrical details must be verified before substitution. According to the Analog Devices AD843 manufacturer datasheet, AD843SH is specified for 34 MHz bandwidth and 135 ns settling to within 0.01% after a 10 V step.
What is the difference between AD843SH and AD843SQ?
AD843SH is the 12-pin TO-8-12 metal-can ordering option, while AD843SQ is identified in a distributor listing as an 8-pin CERDIP option. They therefore do not provide a pin-to-pin drop-in replacement for an existing AD843SH footprint. According to the manufacturer AD843 family documentation, both options belong to the AD843 fast-settling CBFET amplifier family, but package choice must follow the original schematic and PCB layout.
When should I choose AD843SH instead of a general-purpose precision op amp?
Choose AD843SH when the signal chain requires the combination of 34 MHz bandwidth, 135 ns settling, 250 V/µs slew rate, and 0.6 nA input bias current. A general-purpose precision amplifier may provide lower offset in some grades, but it may not recover as quickly from a large input step. The Analog Devices AD843 manufacturer datasheet makes AD843SH appropriate where wide bandwidth and fast settling are more important than purely static offset specifications.
Is AD843SH suitable for photodiode and capacitance measurement?
The AD843SH can suit photodiode and capacitance-measurement front ends when its low input bias current and fast settling behavior match the detector and timing requirements. The 0.6 nA input bias current limits the current drawn from a high-impedance detector, while the 135 ns settling time supports rapid measurement cycles. The complete front end must still include suitable biasing, guarding, protection, and compensation for the sensor capacitance.
What is the best drop-in replacement for AD843SH?
No confirmed 5.8 V, pin-compatible drop-in replacement for the AD843SH was identified. The AD843SQ uses an 8-pin CERDIP package, OPA177 has a different package and performance profile, and OPA671AP was only shown in a comparison listing without a verified 12-pin TO-8-12 footprint match. Treat any substitution as unconfirmed until its package drawing, pin functions, supply range, bandwidth, settling behavior, and input bias current have all been checked.
Can OPA177 replace AD843SH in an existing circuit?
OPA177 should not be assumed to be a direct AD843SH replacement because it does not share the verified TO-8-12 package and pin layout. It may be considered only in a redesigned circuit after comparing bandwidth, settling time, slew rate, input bias current, supply range, offset voltage, noise, and temperature behavior. The Analog Devices AD843 manufacturer datasheet is the controlling reference for the AD843SH requirements.

工程參考資料,適用於 AD843SH — 比較、設計指引及合規資訊。

選型指南

Choose the AD843SH when the signal chain needs the combined benefit of 34 MHz bandwidth, 135 ns settling, 250 V/µs slew rate, and 0.6 nA input bias current in a 12-pin TO-8-12 package. It is especially compelling for pulse acquisition, photodiode interfaces, capacitance measurement, and wide-temperature instrumentation. OPA671AP may be considered only after verifying its package and electrical characteristics, while OPA177 may suit a redesigned precision-signal path that does not require the AD843SH's fast large-step recovery. AD843SQ is another AD843-family ordering option but uses an 8-pin CERDIP package, so it is not a footprint-compatible replacement for AD843SH. No confirmed drop-in alternative was found; validate any proposed substitute against pin functions, supply range, bandwidth, settling time, slew rate, input bias current, offset, noise, and temperature limits before releasing it to production.

與替代品比較

參數 本產品
Brand Analog Devices
Package TO-8-12 metal-can package
Number of Pins 12 pins
Amplifier Type Fast-settling voltage-feedback operational amplifier
Input Stage CBFET input
Gain-Bandwidth Product 34 MHz
Settling Time 135 ns to within 0.01% after a 10 V step
Supply Voltage Range -18 V to +18 V
Input Bias Current 0.6 nA
Slew Rate 250 V/µs
Operating Temperature Range -55°C to +125°C

主要差異化特點

  • Fast large-step recovery (對比OPA177)
  • Low input bias current (對比OPA671AP)
  • Wide operating temperature range (對比AD843SQ)

設計說明

Keep the high-impedance input node, feedback components, and input-side ground return compact and free of copper that can increase leakage or parasitic capacitance. The AD843SH's 0.6 nA input bias current benefits from clean guarding and contamination control, particularly in photodiode and capacitance-measurement circuits. Check the actual detector, cable, and PCB capacitance against the AD843 family stability guidance before reducing the feedback impedance.

Route supply and ground connections with short paths and place decoupling capacitors close to the relevant device pins. Preserve a compact feedback loop to limit parasitic feedback capacitance and maintain predictable high-frequency behavior. The 34 MHz bandwidth means interconnect effects can become significant even when the schematic simulation appears ideal, so include realistic source and load capacitance in final verification.

Do not interpret the 34 MHz bandwidth as the maximum usable small-signal frequency for every gain setting, and do not assume that the 135 ns settling specification applies without its stated 0.01% and 10 V step conditions. Evaluate large-signal slew-rate behavior separately, confirm output swing over the required temperature range, and verify common-mode headroom across the full -18 V to +18 V supply capability.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The product listing identifies the AD843SH as RoHS compliant. No explicit REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was found.

資料驗證日期: 2026-11-14 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

AD843SH datasheet AD843SH datasheet pdf AD843SH pinout AD843SH TO-8-12 footprint AD843SH 34MHz bandwidth AD843SH 135ns settling time AD843SH equivalent AD843SH drop-in replacement AD843SH vs OPA671AP AD843SH price AD843SH stock Analog Devices AD843SH AD843SH photodiode amplifier AD843SH pulse acquisition what can replace AD843SH

相關元件與詞彙

Analog Devices AD843SH AD843 AD843SQ OPA671AP OPA177 AD8139ACPZ ADA4899-1YCPZ operational amplifier voltage-feedback amplifier CBFET input field-effect transistor gain-bandwidth product settling time slew rate input bias current input noise density common-mode rejection ratio TO-8-12 metal-can package precision measurement photodiode amplifier pulse acquisition capacitance measurement RoHS
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情