Analog Devices

AD9632ARZ - 320 MHz High-Speed Op Amp | Analog Devices

MPN: AD9632ARZ ✓ 啟用中
±6 V Vdss 8-SOIC, 3.90 mm body width Package -113 dBc Speed
MOQ: 1 |

AD9632ARZ 概覽

The Analog Devices AD9632ARZ is a single-circuit, voltage-feedback operational amplifier optimized for high-speed signal chains, with a 320 MHz small-signal bandwidth, 1500 V/us slew rate, and operation from ±6 V supplies. It is housed in an 8-SOIC package and is stable at a closed-loop gain of 2 or greater. The device combines wide bandwidth with low distortion for instrumentation, data acquisition, communications, and signal-conditioning applications.

A high-speed voltage-feedback operational amplifier is a semiconductor amplifier that uses negative feedback to amplify high-frequency signals while maintaining controlled gain, bandwidth, and distortion. In the signal-chain hierarchy, the AD9632ARZ belongs to the operational-amplifier family, which supports analog-to-digital converter drivers, buffer stages, test equipment, communications circuits, and precision signal conditioning. Its voltage-feedback architecture responds rapidly to input changes and supports closed-loop gains of 2 and above.

The principal performance features include a 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth for a 4 V p-p signal. Slew rate reaches 1500 V/us, allowing large-amplitude signals to transition quickly and limiting distortion in demanding pulse and waveform applications. According to the manufacturer product information, typical spurious-free dynamic range is -113 dBc at 1 MHz and -95 dBc at 5 MHz. These characteristics make the amplifier suitable for systems requiring both high frequency coverage and low signal degradation.

The AD9632ARZ uses a voltage-feedback architecture and is stable at gains of 2 or greater, rather than being optimized for unity-gain operation. Its ±6 V supply capability supports bipolar input and output signal ranges in suitable circuit configurations. The AD9631 and AD9632 share a high-speed, wide-bandwidth family, but the AD9631 is unity-gain stable while the AD9632 requires a minimum closed-loop gain of 2. Correct gain selection is therefore essential when replacing or adapting the amplifier in an existing board.

Typical uses include high-speed ADC input drivers, ultrasound and medical signal-conditioning paths, communications receivers, video and imaging equipment, and laboratory instrumentation. In each case, the amplifier can provide gain and drive capability while its low distortion limits unwanted harmonics. Gain-of-2 operation is appropriate when system stability and maximum bandwidth are more important than unity-gain convenience.

PCB implementation should minimize parasitic capacitance and maintain short feedback paths because excessive trace or component capacitance can reduce stability and alter distortion. Decoupling capacitors should be placed close to the supply pins, and the grounding strategy should provide a low-impedance return for high-frequency current. Confirm output swing, input common-mode range, and thermal conditions against the operating point before production release.

This product guide combines the manufacturer specifications, package information, performance characteristics, application guidance, and design considerations needed to evaluate the AD9632ARZ. It also distinguishes the gain-stability requirements of the AD9632 from related high-speed amplifier options and identifies engineering checks that matter when converting the device into a reliable production design.

直接替換替代品,適用於 AD9632ARZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: AD9632ARZ (相同外形與佔位) — 差異在於 Large-Signal Bandwidth, Number of Circuits, Package.

Analog Devices
Large-Signal Bandwidth: 250 MHz
Number of Circuits: 1
Package: 8-pin SOIC
比較對象 AD9632ARZ →

此產品無可直接替換的替代品。

申請替代品

AD9632ARZ 最大額定值與電氣特性

Amplifier Type Voltage-feedback operational amplifier
Number of Circuits 1 circuit
Small-Signal Bandwidth 320 MHz
Large-Signal Bandwidth 250 MHz at 4 V p-p
Slew Rate 1500 V/us
Minimum Stable Closed-Loop Gain 2 V/V
Typical SFDR at 1 MHz -113 dBc
Typical SFDR at 5 MHz -95 dBc
供應電壓 ±6 V
封裝 8-SOIC, 3.90 mm body width
安裝類型 Surface mount
Packaging Tube
Production Status Production

AD9632ARZ 8-soic, 3.90 mm body width 腳位配置指南

AD9632ARZ(8-soic, 3.90 mm body width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

AD9632ARZ 的 8-soic, 3.90 mm body width 封裝腳位圖

無詳細腳位定義資料: AD9632ARZ.

請參閱 資料表 以查看完整腳位配置。

典型應用

AD9632ARZ 適用於 6 應用s: High-Speed ADC Input Driver, Communications Receiver Signal Conditioning, Ultrasound and Medical Signal Conditioning, Video and Imaging Amplification, Test and Measurement Instrumentation, Industrial Sensor Signal Conditioning.

📡

High-Speed ADC Input Driver

The AD9632ARZ fits ADC front ends that require a low-distortion buffer or gain stage before conversion. Its 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth at 4 V p-p, and 1500 V/us slew rate allow rapid transitions to pass through the signal chain. The device is stable at a minimum gain of 2, so the feedback network can use the amplifier's high-speed operating region while rejecting converter switching energy. During design, verify the ADC input capacitance, output-voltage swing, and required settling accuracy, then place the feedback components close to the amplifier to minimize parasitic feedback. The ±6 V supply capability supports bipolar drive conditions when paired with suitable input and output swing.

🌐

Communications Receiver Signal Conditioning

The AD9632ARZ is appropriate for communications receivers that need low-distortion amplification of high-frequency waveforms. Its 320 MHz small-signal bandwidth covers a broad range of IF and baseband signal-conditioning needs, while the 1500 V/us slew rate helps preserve edge quality on large-amplitude transitions. Typical SFDR of -113 dBc at 1 MHz and -95 dBc at 5 MHz supports applications where harmonics or intermodulation products would otherwise limit receiver performance. The amplifier must be used at a closed-loop gain of 2 or greater. PCB implementation should use short feedback routes, controlled return paths, and close decoupling because parasitic inductance and capacitance can change both stability and distortion at these frequencies.

💊

Ultrasound and Medical Signal Conditioning

The AD9632ARZ can amplify the short, high-frequency pulses used in ultrasonic and medical acquisition systems. Its 320 MHz bandwidth supports wideband signal paths, and the 1500 V/us slew rate helps the amplifier reproduce steep pulse edges without excessive slew distortion. The -113 dBc typical SFDR at 1 MHz is particularly useful when reducing harmonic content in sensitive front ends. Because the AD9632 is stable only at gain 2 or greater, designers should confirm that the transducer, protection network, and amplifier feedback establish a valid noise gain. Input protection, patient-isolation requirements, and medical regulatory obligations must be handled by the complete system rather than by the amplifier alone.

📺

Video and Imaging Amplification

The AD9632ARZ can serve as a high-speed gain or drive stage in imaging systems that process analog video or high-rate sensor outputs. Its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth provide margin for wideband components, while the 1500 V/us slew rate supports fast transitions at higher amplitudes. Low-distortion behavior helps retain signal fidelity when the output is routed into an ADC, display driver, or subsequent analog stage. The minimum stable gain of 2 must be incorporated into the amplifier topology from the first schematic stage. Keep the feedback loop compact, use a controlled ground reference, and verify the output swing against the sensor and converter limits to avoid clipping before the available headroom is reached.

🖥️

Test and Measurement Instrumentation

The AD9632ARZ is well suited to precision test and measurement front ends where source signals must be amplified with limited distortion. The 320 MHz small-signal bandwidth supports high-frequency probes and buffers, while 1500 V/us slew rate improves large-signal fidelity. For sinusoidal and multitone measurements, the manufacturer's typical SFDR figures of -113 dBc at 1 MHz and -95 dBc at 5 MHz provide a useful starting point for harmonic budgeting. The amplifier's gain-of-2 stability requirement simplifies selection for many non-inverting signal-conditioning paths. Use short connections between the source, amplifier, and converter, maintain symmetric return paths, and account for probe and fixture capacitance. Calibration should be performed with the final input network and cable loading because external parasitics can alter the observed response.

🏭

Industrial Sensor Signal Conditioning

The AD9632ARZ can amplify outputs from fast industrial sensors when the signal path requires more bandwidth than a general-purpose amplifier can provide. Its 320 MHz small-signal bandwidth and 1500 V/us slew rate are useful for sensors that produce rapidly changing waveforms, while the low-distortion characteristics help preserve useful signal content. The part operates from ±6 V and is stable at gain 2 or greater, allowing a straightforward non-inverting conditioning topology when the sensor requires additional amplitude. Industrial systems must also account for common-mode range, output swing, noise gain, and grounding around the sensor. Place protection elements close to the connector, isolate high-current return paths from the amplifier ground reference, and verify operation across the complete input and output signal ranges.

What are the key specifications of AD9632ARZ that engineers should know?
The AD9632ARZ is a single-channel, voltage-feedback high-speed operational amplifier with a 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth at 4 V p-p, and a 1500 V/us slew rate. It is stable at gains of 2 or greater and operates from ±6 V supplies in an 8-SOIC package. According to the Analog Devices AD9632 datasheet, Rev. D, typical SFDR is -113 dBc at 1 MHz and -95 dBc at 5 MHz.
What is the minimum stable gain of the AD9632ARZ?
The AD9632ARZ requires a minimum closed-loop gain of 2 for stable operation. The Analog Devices AD9632 datasheet, Rev. D, distinguishes it from the AD9631, which is unity-gain stable. Designers should therefore use the AD9632 with a gain of at least 2 and verify the complete feedback network, including parasitic capacitance and board layout, during stability testing.
What bandwidth and slew rate does the AD9632ARZ provide?
The AD9632ARZ provides a 320 MHz small-signal bandwidth, a 250 MHz large-signal bandwidth for a 4 V p-p signal, and a slew rate of 1500 V/us. These values make the device appropriate for high-speed analog signal conditioning. According to the Analog Devices product documentation, the 320 MHz bandwidth is associated with gain-of-2 operation, where the amplifier's minimum stable gain requirement is satisfied.
Where can I download the AD9632ARZ datasheet PDF?
The official AD9632ARZ datasheet is available through the Analog Devices AD9632 product page at analog.com. The manufacturer lists the AD9632 family as production and provides the Rev. D data sheet, product selection information, documentation, simulation resources, and evaluation-kit links. Use the manufacturer's PDF for the authoritative pin description, recommended operating conditions, electrical characteristics, and application guidance.
Where is the AD9632ARZ pinout located?
The AD9632ARZ pinout is shown in the manufacturer AD9632 datasheet, Rev. D, on the package drawing and pin-description table. The component uses an 8-SOIC package. Before assigning PCB nets, compare that table with the selected ordering code and use the pin-description table in the manufacturer datasheet for signal, supply, and reserved-pin assignments.
Is the AD9632ARZ suitable for high-speed ADC driver applications?
The AD9632ARZ is suitable for many high-speed ADC driver stages because it combines a 320 MHz small-signal bandwidth, 1500 V/us slew rate, and low distortion with operation from ±6 V. The Analog Devices data sheet describes high-speed, wide-bandwidth amplifier performance suited to demanding signal chains. The ADC input architecture, settling requirements, output swing, and noise-gain configuration must still be checked together.
What is the difference between AD9632ARZ and AD9631?
The principal difference is closed-loop gain stability: the AD9632ARZ is stable at gains of 2 or greater, while the AD9631 is unity-gain stable. Both are high-speed voltage-feedback amplifiers, but a circuit designed for the AD9631 cannot automatically use the AD9632 without checking noise gain and feedback topology. According to the Analog Devices AD9632 family information, the AD9631 provides unity-gain stability while the AD9632 requires gain of at least 2.
AD9632ARZ vs AD9632AR-REEL7: which ordering code should I choose?
AD9632ARZ and AD9632AR-REEL7 identify different delivery configurations of the same AD9632 amplifier family rather than different electrical designs. AD9632ARZ is associated with tube packaging, while AD9632AR-REEL7 denotes the reel-packed ordering option. Both use an 8-SOIC package, so the appropriate choice depends on assembly handling, feeder setup, and required production packaging rather than a change in circuit function.
When should I choose AD9632ARZ instead of a unity-gain-stable amplifier?
Choose the AD9632ARZ when a high-speed circuit naturally uses closed-loop gain of 2 or greater and needs its 320 MHz bandwidth and low distortion. A unity-gain-stable device may be preferable when the signal path must operate at exactly 1 V/V. According to the Analog Devices AD9632 datasheet, Rev. D, the AD9632 is stable only at gain 2 or greater, so stability requirements should determine the selection.
What can replace the AD9632ARZ in an existing circuit?
A direct replacement must preserve the 8-SOIC pinout, ±6 V supply arrangement, closed-loop stability at gain 2 or greater, bandwidth, slew rate, and distortion requirements. The AD9632 family provides closely related ordering options, but packaging changes should not be treated as distinct electrical replacements. Use the manufacturer pin-description table and the AD9632 data sheet, Rev. D, to validate any proposed substitution before production use.
Where can I buy AD9632ARZ online and check current stock?
Use the Request a Quote form on this page to request AD9632ARZ availability, current pricing, lead time, and order quantities from XAIPART. The Analog Devices manufacturer page identifies the AD9632 family as production, which confirms product continuity but does not establish distributor inventory for this exact ordering code. Submit the desired quantity and tube-packaging requirement with the quote request.
What is the price of AD9632ARZ?
Use the Request a Quote form on this page for the current AD9632ARZ unit price, quantity breaks, stock position, and lead time. Quote-based handling allows the response to reflect the exact ordering code, package format, order quantity, and current component availability. The manufacturer lists the AD9632 family as production, but that status does not by itself determine a current transaction price for AD9632ARZ.
What is the lead time for AD9632ARZ?
Request the current AD9632ARZ lead time through the Request a Quote form on this page and include the required order quantity and delivery location. Lead time can change with component inventory, packaging demand, and production scheduling, so a specific commitment should be confirmed for the exact AD9632ARZ ordering code. Analog Devices lists the AD9632 family as production, which supports normal sourcing review but is not a lead-time guarantee.
Is AD9632ARZ in stock?
Confirm current AD9632ARZ inventory through the Request a Quote form on this page. The Analog Devices product page identifies the AD9632 family as production, while exact order-code stock can vary by quantity and packaging. Provide the required quantity, tube packaging preference, and target delivery date so the quotation can reflect an actionable supply position.
How should the AD9632ARZ be laid out on a high-speed PCB?
Place the AD9632ARZ input, output, and feedback paths on short, controlled-impedance traces with minimal parasitic capacitance. Position supply-decoupling capacitors close to the device and provide a low-impedance ground path for high-frequency current. According to the Analog Devices AD9632 datasheet, Rev. D, the amplifier is stable at gain 2 or greater; preserve that gain condition while controlling feedback-node capacitance to avoid oscillation or degraded distortion.

工程參考資料,適用於 AD9632ARZ — 比較、設計指引及合規資訊。

選型指南

Choose the AD9632ARZ when the signal chain naturally operates at a closed-loop gain of 2 or greater and requires the combination of a 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth, and 1500 V/us slew rate. It is a strong fit for ADC drivers, communications receivers, ultrasound interfaces, imaging, and precision instrumentation. The AD9631 is preferable when the circuit must be unity-gain stable, although its closed-loop behavior must be checked before interchangeability. For a direct replacement of AD9632ARZ, require the same 8-SOIC pinout, ±6 V supply arrangement, bandwidth, slew rate, output swing, and stable gain of at least 2. Do not substitute a device merely because it uses an 8-SOIC package; gain stability and distortion are more important than package count. Validate the final design with the intended source and load impedances because probe, connector, cable, and feedback-node capacitance can materially affect a high-speed amplifier.

與替代品比較

參數 本產品
Brand Analog Devices
Package 8-SOIC
Amplifier Architecture Voltage feedback
Number of Circuits 1 circuit
Small-Signal Bandwidth 320 MHz
Large-Signal Bandwidth 250 MHz at 4 V p-p
Slew Rate 1500 V/us
Minimum Stable Gain 2 V/V
Supply Voltage ±6 V
Typical SFDR at 1 MHz -113 dBc

主要差異化特點

  • High-speed gain stage with low distortion (對比AD9631)
  • Strong large-signal performance (對比AD9631)
  • Low spurious content for demanding signal chains (對比AD9631)

設計說明

Keep the input, output, feedback, and ground paths short and route them as controlled-impedance traces. Place the feedback network directly beside the amplifier pins, and avoid adding long stubs or test-point branches near the high-impedance feedback node. Excess capacitance can move the amplifier toward oscillation or alter its distortion performance. A compact layout is especially important because the device provides 320 MHz small-signal bandwidth and 1500 V/us slew rate.

Place the supply-decoupling capacitors immediately adjacent to the amplifier's supply and ground pins, and select capacitors with adequate high-frequency behavior. The AD9632ARZ operates from ±6 V supplies, so each rail should remain within its specified operating range under transient load. Use a quiet, low-impedance ground return for the amplifier rather than sharing a narrow return path with unrelated high-current circuitry.

Confirm that the complete circuit provides closed-loop gain of 2 or greater before installation because the AD9632 is not unity-gain stable. Evaluate the feedback resistor values, source and load capacitance, and any cable or connector parasitics with the final layout. A gain-of-2 prototype that oscillates only at a particular frequency may indicate excessive feedback-node capacitance or an unintended gain configuration.

Do not treat the AD9632ARZ as a direct substitute for the unity-gain-stable AD9631 without reviewing the feedback topology and noise gain. Also check the ±6 V supply requirement, input common-mode limits, and output swing before power-up. The Analog Devices AD9632 datasheet, Rev. D, should be used to validate the final gain, termination, decoupling, and operating conditions.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product information does not state the requested compliance attributes. Confirm current material and environmental declarations with Analog Devices before production release.

資料驗證日期: 2026-11-19 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

AD9632ARZ datasheet AD9632ARZ pinout AD9632ARZ datasheet pdf AD9632ARZ equivalent AD9632ARZ replacement AD9632ARZ cross reference AD9632ARZ vs AD9631 AD9632ARZ price AD9632ARZ stock Analog Devices AD9632ARZ AD9632ARZ 320 MHz op amp AD9632ARZ 8-SOIC pinout AD9632ARZ ADC driver AD9632ARZ high speed amplifier

相關元件與詞彙

Analog Devices AD9632ARZ AD9632 AD9631 AD9632AR-REEL7 Operational amplifier Voltage-feedback amplifier High-speed amplifier Signal conditioning Analog-to-digital converter driver 320 MHz bandwidth 1500 V/us slew rate SFDR Gain of 2 Voltage feedback architecture 8-SOIC SOIC package family Surface-mount package Communications receiver Ultrasound signal conditioning Precision instrumentation Industrial sensor Decoupling capacitor Feedback node
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情