AD977ABRSZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD977ABRSZ ✓ 啟用中AD977ABRSZ 概覽
An ADC is an interface IC that converts an analog voltage into a digital number for processing by a microcontroller, DSP, FPGA, or data-acquisition system. The AD977 belongs to the successive-approximation register, or SAR, converter family. SAR ADCs compare the sampled input against a capacitive DAC array during successive conversion cycles, making them well suited to low-power, high-resolution measurement systems that do not require continuous conversion.
The AD977A provides a throughput rate of 200 kSPS with 16-bit resolution and operates from a single 5 V supply. The specified input supply range is 4.75 V to 5.25 V, while the operating temperature range is -40°C to 85°C. Its serial data interface reduces the number of PCB connections required for conversion data, control signals, and clocking compared with a parallel ADC.
The switched-capacitor SAR architecture provides the core conversion function, while the integrated sample-and-hold network, reference, and clock reduce the number of external components required in a measurement circuit. Data can be transferred using the internal clock or synchronized to an external data clock. This flexibility helps the converter accommodate both continuously sampled channels and externally triggered measurements.
Typical uses include industrial process monitoring, sensor signal acquisition, laboratory instrumentation, industrial control systems, and embedded data acquisition. The 200 kSPS conversion rate supports high sampling throughput, while the 16-bit word length preserves fine amplitude detail for slowly changing or precision-oriented measurements. A serial interface also reduces routing congestion on compact mixed-signal boards.
When designing around the AD977ABRSZ, keep analog input, reference, and ground paths short, and isolate digital clock and serial-data traces from sensitive analog nodes. The input range and acquisition time must be checked against the source impedance and sensor bandwidth. Stable supply and reference bypassing are essential because supply variation can directly affect conversion accuracy.
This product page combines the AD977 family specifications with a structured comparison of pin-compatible options, application guidance, and practical PCB design notes. It is intended to help engineers evaluate conversion speed, resolution, interface method, packaging, and supply requirements before integrating the ADC.
直接替換替代品,適用於 AD977ABRSZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD977ABRSZ (相同外形與佔位) — 差異在於 Package, Input Type, Operating Temperature, Power-Down Mode, Throughput Rate.
AD977ABRS
✅ 直接替換聯絡詢價
查看資料表 →AD977BRSZ
✅ 直接替換聯絡詢價
查看資料表 →AD977ARBRZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD977ABRSZ 最大額定值與電氣特性
| Converter Type | Successive-approximation register ADC |
| 解析度 | 16 bit |
| Throughput Rate | 200 kSPS |
| AD977 Throughput Rate | 100 kSPS |
| Input Type | 1 input |
| Supply Type | Single supply |
| Nominal Supply Voltage | 5 V |
| Operating Supply Range | 4.75 V to 5.25 V |
| Data Interface | Serial, SPI |
| Maximum Power Dissipation | 100 mW |
| 工作溫度範圍 | -40°C to 85°C |
| 封裝 | 28-pin SSOP, 0.209 inch / 5.30 mm width |
| Packaging | Tube |
| Converter Resolution | 2 LSB |
| Internal Functions | Sample-and-hold, reference, clock, and serial data interface |
| Clocking | Internal clock or external data-clock synchronization |
| RoHS 狀態 | Compliant |
AD977ABRSZ 28-pin ssop, 0.209 inch / 5.30 mm width 腳位配置指南
AD977ABRSZ(28-pin ssop, 0.209 inch / 5.30 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD977ABRSZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD977ABRSZ 適用於 6 應用s: Industrial Process Monitoring, Precision Sensor Signal Acquisition, Laboratory Instrumentation, Embedded Data Acquisition, Portable Measurement Equipment, Communication and Control Systems.
Industrial Process Monitoring
The AD977ABRSZ suits process-control front ends that must acquire slowly changing analog variables while preserving 16-bit amplitude detail. Its 200 kSPS throughput provides ample conversion headroom for multiplexed sensor channels, while the serial interface limits PCB routing compared with a parallel converter. The device operates from a single 4.75 V to 5.25 V supply and supports a -40°C to 85°C ambient range, matching many industrial enclosure requirements. Place the analog input path close to the converter and provide filtering, input protection, and stable bypassing at the supply and reference pins.
推薦
Precision Sensor Signal Acquisition
The AD977ABRSZ is appropriate for sensor front ends requiring more frequent conversions than a 100 kSPS AD977 implementation. A 16-bit converter preserves fine signal detail, while the 200 kSPS rate allows the system to refresh the measurement rapidly or sample several multiplexed inputs. The single 5 V supply simplifies analog and digital rail planning, and the SPI-compatible serial interface preserves board space in compact sensor modules. The selected sensor amplifier must settle within the converter acquisition interval, so source impedance and anti-alias filtering require careful design.
推薦
Laboratory Instrumentation
The AD977ABRSZ can serve as the acquisition converter in compact laboratory instruments that require accurate numerical readings without a high-speed parallel data bus. The 16-bit resolution is useful for representing low-level analog measurements, and the 200 kSPS rate supports responsive updates during calibration or signal characterization. Its serial data format reduces connector and routing requirements in multi-channel instruments. Analog layout remains critical: separate the converter input from digital clock traces, maintain a low-impedance reference network, and place bypass capacitors close to their associated supply pins.
推薦
Embedded Data Acquisition
The AD977ABRSZ is well suited to embedded acquisition modules where a controller must collect analog measurements through a compact serial interface. A 16-bit word provides useful numerical resolution, and the 200 kSPS throughput permits rapid sampling of controlled or multiplexed channels. Because the serial interface reduces the number of signal connections, the converter can be paired efficiently with an embedded microcontroller or FPGA. Firmware should account for conversion timing and data-read latency, while the PCB should provide a clean ground path between the analog input and digital interface sections.
推薦
Portable Measurement Equipment
The AD977ABRSZ can support portable measurement equipment that prioritizes compactness, numerical resolution, and low converter power rather than the highest possible sampling rate. The single 5 V supply operation simplifies power conversion, while the 28-pin SSOP package supports moderate board density. The serial interface avoids a wide parallel bus and can reduce connector demand in handheld products. Low-power operation should be verified against the complete acquisition cycle, including reference behavior, analog-conditioning circuitry, and the time required by the controller to retrieve each conversion result.
推薦
Communication and Control Systems
The AD977ABRSZ can digitize analog feedback or supervisory signals in industrial communication and control equipment. Its 200 kSPS rate provides sufficient timing margin for many monitoring loops, while 16-bit resolution preserves small variations in controlled voltages. The serial interface is especially practical in compact control boards where a parallel ADC would require additional routing space. Designers should verify the required loop latency, input bandwidth, and isolation boundaries. For safety-critical installations, the selected power and signal-chain components also require appropriate qualification for the final environmental and functional-safety requirements.
推薦
推薦產品摘要
工程參考資料,適用於 AD977ABRSZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD977ABRS | AD977BRSZ | AD977ARBRZ |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit |
| Converter Architecture | Successive-approximation register ADC | Successive-approximation register ADC | Successive-approximation register ADC | Successive-approximation register ADC |
| Data Interface | Serial, SPI | Serial, SPI | Serial, SPI | Serial, SPI |
| Internal Clock Option | Yes | Yes | Yes | Yes |
主要差異化特點
- Higher conversion throughput within the AD977 family (對比AD977ABRS)
- Compact serial data interface (對比AD977BRSZ)
- Single-supply operation with a defined industrial temperature range (對比AD977ARBRZ)
設計說明
Route the analog input directly to the converter and keep it away from the serial clock and data lines. Use a continuous ground plane, place the input-network return directly beneath the relevant analog section, and avoid sharing narrow return paths with digital switching currents. Keep the reference and bypass components close to their associated pins according to the manufacturer pin-description table. These measures minimize conversion error and prevent digital coupling from appearing in measured results.
Decouple the single 5 V supply locally and verify ripple across the full 4.75 V to 5.25 V operating range. Place the principal bypass capacitor beside the converter supply pin with a short, low-inductance connection, and route transient current away from the analog input and reference nodes. Because the device can dissipate up to 100 mW, its total operating power still depends on supply voltage, conversion activity, and load conditions; thermal verification should use the final duty cycle.
Check source settling against the ADC acquisition interval before selecting the front-end bandwidth. Excessive source impedance can allow the sample-and-hold capacitor to acquire an incomplete input voltage, while excessive bandwidth can admit out-of-band noise. Add an appropriate RC antialias network or buffer and confirm settling over the full input-voltage range. The serial clock edge rate should also be controlled so that coupling into the analog section stays below the required measurement noise floor.
Do not interchange AD977 and AD977A ordering codes solely because both use the same family name. The AD977 is identified as a 100 kSPS part, while the AD977A is identified as a 200 kSPS part. Also verify temperature grade, supply behavior, package, and every pin assignment before substitution. A footprint match alone does not guarantee that a replacement preserves conversion timing, reference performance, or digital control functionality.
合規資訊
RoHS compliance is stated in the AD977ABRSZ component listing. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals qualification is established for the exact ordering code.