Analog Devices

AD977ABRSZ - 16-Bit 200 kSPS SAR ADC | Analog Devices

料号: AD977ABRSZ ✓ 量产中
Single supply Vdss 28-pin SSOP, 0.209 inch / 5.30 mm width Package Internal clock or external data-clock synchronization Speed
最小起订量: 1 |

AD977ABRSZ 概述

The Analog Devices AD977ABRSZ is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, a single 5 V supply, and a 28-pin SSOP package. It combines a 16-bit switched-capacitor ADC, sample-and-hold circuit, internal reference, clock, and serial SPI-compatible data interface in one low-power mixed-signal device.

An ADC is an interface IC that converts an analog voltage into a digital number for processing by a microcontroller, DSP, FPGA, or data-acquisition system. The AD977 belongs to the successive-approximation register, or SAR, converter family. SAR ADCs compare the sampled input against a capacitive DAC array during successive conversion cycles, making them well suited to low-power, high-resolution measurement systems that do not require continuous conversion.

The AD977A provides a throughput rate of 200 kSPS with 16-bit resolution and operates from a single 5 V supply. The specified input supply range is 4.75 V to 5.25 V, while the operating temperature range is -40°C to 85°C. Its serial data interface reduces the number of PCB connections required for conversion data, control signals, and clocking compared with a parallel ADC.

The switched-capacitor SAR architecture provides the core conversion function, while the integrated sample-and-hold network, reference, and clock reduce the number of external components required in a measurement circuit. Data can be transferred using the internal clock or synchronized to an external data clock. This flexibility helps the converter accommodate both continuously sampled channels and externally triggered measurements.

Typical uses include industrial process monitoring, sensor signal acquisition, laboratory instrumentation, industrial control systems, and embedded data acquisition. The 200 kSPS conversion rate supports high sampling throughput, while the 16-bit word length preserves fine amplitude detail for slowly changing or precision-oriented measurements. A serial interface also reduces routing congestion on compact mixed-signal boards.

When designing around the AD977ABRSZ, keep analog input, reference, and ground paths short, and isolate digital clock and serial-data traces from sensitive analog nodes. The input range and acquisition time must be checked against the source impedance and sensor bandwidth. Stable supply and reference bypassing are essential because supply variation can directly affect conversion accuracy.

This product page combines the AD977 family specifications with a structured comparison of pin-compatible options, application guidance, and practical PCB design notes. It is intended to help engineers evaluate conversion speed, resolution, interface method, packaging, and supply requirements before integrating the ADC.

直接替换替代料: AD977ABRSZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AD977ABRSZ (相同外形与封装尺寸) ——差异在于 Package, Input Type, Operating Temperature, Power-Down Mode, Throughput Rate.

Analog Devices
Package: 28-pin SSOP (RS-28)
Operating Temperature: -40 °C to +85 °C
Power-Down Mode: 50 µW
对比 AD977ABRSZ →
Analog Devices
Package: 28-pin SSOP, 5.30 mm width
Input Type: Single input
Operating Temperature: -40°C to +85°C
对比 AD977ABRSZ →

AD977ABRS

✅ 直接替换
Analog Devices
📦 28-SSOP
16 bit · 200 kSPS · 100 kSPS · 1 · SAR (Successive Approximation Register) · 5 V single supply · 100 mW max · 50 µW

联系询价

查看数据手册 →

AD977BRSZ

✅ 直接替换
Analog Devices
📦 28-SSOP
16 bit · Successive approximation (SAR) · Single input · 100 kSPS · 4.75 V to 5.25 V · 2.5 V · Serial, SPI · 100 mW maximum

联系询价

查看数据手册 →

AD977ARBRZ

✅ 直接替换 ⚠️ 规格未核验
📦 28-SSOP
Same-brand AD977A 16-bit 200 kSPS family and 28-SSOP footprint; suffix-defined temperature and packing attributes require confirmation

📋 参考替代料(不在目录中)

AD977ABRSZ 最大额定值与电气特性

Converter Type Successive-approximation register ADC
分辨率 16 bit
Throughput Rate 200 kSPS
AD977 Throughput Rate 100 kSPS
Input Type 1 input
Supply Type Single supply
Nominal Supply Voltage 5 V
Operating Supply Range 4.75 V to 5.25 V
Data Interface Serial, SPI
Maximum Power Dissipation 100 mW
工作温度范围 -40°C to 85°C
封装 28-pin SSOP, 0.209 inch / 5.30 mm width
Packaging Tube
Converter Resolution 2 LSB
Internal Functions Sample-and-hold, reference, clock, and serial data interface
Clocking Internal clock or external data-clock synchronization
RoHS 状态 Compliant

AD977ABRSZ 28-pin ssop, 0.209 inch / 5.30 mm width 引脚配置指南

AD977ABRSZ(28-pin ssop, 0.209 inch / 5.30 mm width 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AD977ABRSZ 的 28-pin ssop, 0.209 inch / 5.30 mm width 封装引脚图

暂无详细引脚数据: AD977ABRSZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AD977ABRSZ 适用于 6 应用s: Industrial Process Monitoring, Precision Sensor Signal Acquisition, Laboratory Instrumentation, Embedded Data Acquisition, Portable Measurement Equipment, Communication and Control Systems.

🏭

Industrial Process Monitoring

The AD977ABRSZ suits process-control front ends that must acquire slowly changing analog variables while preserving 16-bit amplitude detail. Its 200 kSPS throughput provides ample conversion headroom for multiplexed sensor channels, while the serial interface limits PCB routing compared with a parallel converter. The device operates from a single 4.75 V to 5.25 V supply and supports a -40°C to 85°C ambient range, matching many industrial enclosure requirements. Place the analog input path close to the converter and provide filtering, input protection, and stable bypassing at the supply and reference pins.

🧩

Precision Sensor Signal Acquisition

The AD977ABRSZ is appropriate for sensor front ends requiring more frequent conversions than a 100 kSPS AD977 implementation. A 16-bit converter preserves fine signal detail, while the 200 kSPS rate allows the system to refresh the measurement rapidly or sample several multiplexed inputs. The single 5 V supply simplifies analog and digital rail planning, and the SPI-compatible serial interface preserves board space in compact sensor modules. The selected sensor amplifier must settle within the converter acquisition interval, so source impedance and anti-alias filtering require careful design.

🔧

Laboratory Instrumentation

The AD977ABRSZ can serve as the acquisition converter in compact laboratory instruments that require accurate numerical readings without a high-speed parallel data bus. The 16-bit resolution is useful for representing low-level analog measurements, and the 200 kSPS rate supports responsive updates during calibration or signal characterization. Its serial data format reduces connector and routing requirements in multi-channel instruments. Analog layout remains critical: separate the converter input from digital clock traces, maintain a low-impedance reference network, and place bypass capacitors close to their associated supply pins.

🖥️

Embedded Data Acquisition

The AD977ABRSZ is well suited to embedded acquisition modules where a controller must collect analog measurements through a compact serial interface. A 16-bit word provides useful numerical resolution, and the 200 kSPS throughput permits rapid sampling of controlled or multiplexed channels. Because the serial interface reduces the number of signal connections, the converter can be paired efficiently with an embedded microcontroller or FPGA. Firmware should account for conversion timing and data-read latency, while the PCB should provide a clean ground path between the analog input and digital interface sections.

📱

Portable Measurement Equipment

The AD977ABRSZ can support portable measurement equipment that prioritizes compactness, numerical resolution, and low converter power rather than the highest possible sampling rate. The single 5 V supply operation simplifies power conversion, while the 28-pin SSOP package supports moderate board density. The serial interface avoids a wide parallel bus and can reduce connector demand in handheld products. Low-power operation should be verified against the complete acquisition cycle, including reference behavior, analog-conditioning circuitry, and the time required by the controller to retrieve each conversion result.

🌐

Communication and Control Systems

The AD977ABRSZ can digitize analog feedback or supervisory signals in industrial communication and control equipment. Its 200 kSPS rate provides sufficient timing margin for many monitoring loops, while 16-bit resolution preserves small variations in controlled voltages. The serial interface is especially practical in compact control boards where a parallel ADC would require additional routing space. Designers should verify the required loop latency, input bandwidth, and isolation boundaries. For safety-critical installations, the selected power and signal-chain components also require appropriate qualification for the final environmental and functional-safety requirements.

What is the AD977ABRSZ?
The AD977ABRSZ is a 16-bit, 200 kSPS successive-approximation ADC from Analog Devices operating from a single 5 V supply. According to the Analog Devices AD977 product page, the AD977A family includes an integrated sample-and-hold circuit, reference, clock, and serial interface. The exact ordering code AD977ABRSZ is supplied in a 28-pin SSOP package and covers a -40°C to 85°C operating range.
What are the key specifications of AD977ABRSZ that engineers should know?
The AD977ABRSZ combines 16-bit resolution, a 200 kSPS conversion rate, a 4.75 V to 5.25 V single-supply range, and a serial SPI-compatible interface. The Analog Devices AD977 product page identifies the converter as a switched-capacitor SAR ADC with sample-and-hold, reference, clock, and serial-output functions. Its 28-pin SSOP package and 100 mW maximum power dissipation make it suitable for compact, low-power data-acquisition equipment.
Where can I download the AD977ABRSZ datasheet PDF?
The official AD977ABRSZ datasheet and product resources are available through the Analog Devices AD977 product page at https://www.analog.com/en/products/ad977.html. The AD977 family documentation covers the AD977 and AD977A converters, including the 16-bit architecture, 100 kSPS AD977 rating, 200 kSPS AD977A rating, 5 V supply operation, electrical characteristics, and package information. Use the pin-description table in the manufacturer documentation when assigning PCB tracks.
Where can I find the AD977ABRSZ pinout?
The AD977ABRSZ pin assignment is defined in the AD977 family datasheet published on the Analog Devices product page. The device uses a 28-pin SSOP outline measuring 0.209 inches, or 5.30 mm, in width. When laying out the PCB, follow the numbered pin table and the package drawing rather than inferring connections from similar 28-pin mixed-signal devices, because power, reference, analog input, clock, and serial signals have specific assigned locations.
How does AD977ABRSZ compare with AD977ABRS?
AD977ABRSZ is the 16-bit, 200 kSPS AD977A converter in a 28-pin SSOP package, while AD977ABRS is also identified as a 16-bit, 100 kSPS-capable 28-SSOP SAR ADC family option. The ordering suffix controls the exact device configuration, so engineers should compare the manufacturer ordering guide and pin-description tables. The most important functional distinction to verify is whether the selected suffix provides the AD977A 200 kSPS rating.
AD977ABRSZ vs AD977BRSZ: which is the better replacement candidate?
AD977ABRSZ is the preferred choice when the design requires the explicitly identified AD977A configuration with 200 kSPS throughput and a 28-pin SSOP package. AD977BRSZ appears in the pin-compatible cross-reference information, but its complete ordering-code attributes must be checked against the AD977 family documentation. For a production replacement, verify supply range, temperature grade, conversion rate, reference behavior, and every pin assignment before approving either device.
When should I choose AD977ABRSZ over a lower-speed SAR ADC?
Choose the AD977ABRSZ when a design needs 16-bit resolution at up to 200 kSPS and can use a serial interface with a single 5 V supply. It is particularly useful when parallel data routing would consume too many PCB traces or when the acquisition system needs more frequent updates than the original 100 kSPS AD977 configuration. If lower throughput, different accuracy, or lower power is sufficient, a slower converter may provide a simpler or more economical implementation.
Is AD977ABRSZ suitable for industrial sensor measurement?
The AD977ABRSZ is suitable for many industrial sensor-measurement systems because it provides 16-bit resolution, 200 kSPS throughput, and a -40°C to 85°C operating range. Its serial interface reduces connection count on compact acquisition boards, and its single 5 V supply simplifies power architecture. The input source must still satisfy the converter acquisition requirements, and the analog frontend should provide suitable filtering, buffering, grounding, and protection.
What can replace the AD977ABRSZ?
AD977ABRS is the clearest same-manufacturer replacement candidate because it is identified in the 28-SSOP AD977 family cross-reference data. AD977BRSZ is another candidate that appears in pin-compatible cross-reference information. Neither candidate should be treated as an automatic substitution: confirm the 200 kSPS rating, 16-bit resolution, 4.75 V to 5.25 V supply range, temperature grade, reference implementation, and complete 28-pin mapping before releasing a replacement design.
Is AD977ABRSZ the same as AD977ABRSRL?
AD977ABRSZ and AD977ABRSRL are not automatically identical ordering codes, even though both are associated with the AD977A 16-bit, 200 kSPS converter family. The cross-reference information identifies both names, but the final suffix can distinguish shipping format, lead-free treatment, or another orderable configuration. Verify the package, temperature range, and manufacturer ordering guide before treating one as interchangeable with the other.
What is the best cross-brand replacement for AD977ABRSZ?
No cross-brand drop-in replacement can be confirmed from the available manufacturer and cross-reference information. A valid substitute must match the 28-pin SSOP footprint, 16-bit SAR architecture, 200 kSPS throughput, single 5 V operation, serial interface, reference characteristics, and pin mapping. Search results that merely offer similar ADC functions or different packages are not drop-in replacements, so production substitution should remain with the documented Analog Devices family candidates until qualification is complete.
Where can I buy AD977ABRSZ online?
The AD977ABRSZ can be requested through the Request a Quote form on this XAIPART product page. The form should be completed with the exact MPN AD977ABRSZ, target quantity, and required tube packaging. Quote requests are the appropriate commercial route because component availability, lead time, and allocation can change; use the exact ordering code and the -40°C to 85°C grade when requesting the device.
What is the price of AD977ABRSZ?
The current commercial price for AD977ABRSZ is handled through the Request a Quote form on this page rather than through a static price statement. Submit the exact MPN AD977ABRSZ and your required quantity to obtain a current quotation. For technical evaluation, retain the 28-pin SSOP package and -40°C to 85°C temperature range so that the requested configuration matches the intended converter.
What is the lead time and stock status for AD977ABRSZ?
Current stock and lead time for AD977ABRSZ should be requested through the Request a Quote form on this XAIPART page. Provide the required order quantity, tube packaging preference, and target date so the procurement request can reflect the exact AD977ABRSZ ordering code. Designers should also allow time for pin, electrical, and system-level verification before committing to a new production build.
Is AD977ABRSZ in stock?
Use the Request a Quote form on this page to request the current AD977ABRSZ stock position and expected lead time. Inventory can vary by manufacturer allocation and order quantity, so a quotation response is more useful than a static availability statement. Include the exact MPN AD977ABRSZ and the intended package format to avoid receiving a quotation for a different grade or packing arrangement.

工程参考数据: AD977ABRSZ ——对比、设计指导和合规信息。

选型指南

Choose AD977ABRSZ when the design needs a 16-bit SAR ADC with a 200 kSPS throughput, serial SPI-compatible data transfer, and a single 5 V supply in a 28-pin SSOP package. It is a strong fit for industrial instrumentation, embedded acquisition, process monitoring, and precision sensor systems. Choose AD977ABRS only after confirming that the lower-speed AD977 behavior satisfies the acquisition requirement. Consider AD977BRSZ or AD977ARBRZ only after checking their complete ordering attributes, temperature grade, and pin definitions against the existing schematic. No cross-brand part is recommended as a drop-in substitute because matching the footprint alone would not ensure compatibility of acquisition timing, reference behavior, clocking, or serial control signals.

与替代料对比

参数 本产品 AD977ABRS AD977BRSZ AD977ARBRZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 28-SSOP 28-SSOP 28-SSOP 28-SSOP
Resolution 16 bit 16 bit 16 bit 16 bit
Converter Architecture Successive-approximation register ADC Successive-approximation register ADC Successive-approximation register ADC Successive-approximation register ADC
Data Interface Serial, SPI Serial, SPI Serial, SPI Serial, SPI
Internal Clock Option Yes Yes Yes Yes

关键差异点

  • Higher conversion throughput within the AD977 family (对比 AD977ABRS)
  • Compact serial data interface (对比 AD977BRSZ)
  • Single-supply operation with a defined industrial temperature range (对比 AD977ARBRZ)

设计说明

Route the analog input directly to the converter and keep it away from the serial clock and data lines. Use a continuous ground plane, place the input-network return directly beneath the relevant analog section, and avoid sharing narrow return paths with digital switching currents. Keep the reference and bypass components close to their associated pins according to the manufacturer pin-description table. These measures minimize conversion error and prevent digital coupling from appearing in measured results.

Decouple the single 5 V supply locally and verify ripple across the full 4.75 V to 5.25 V operating range. Place the principal bypass capacitor beside the converter supply pin with a short, low-inductance connection, and route transient current away from the analog input and reference nodes. Because the device can dissipate up to 100 mW, its total operating power still depends on supply voltage, conversion activity, and load conditions; thermal verification should use the final duty cycle.

Check source settling against the ADC acquisition interval before selecting the front-end bandwidth. Excessive source impedance can allow the sample-and-hold capacitor to acquire an incomplete input voltage, while excessive bandwidth can admit out-of-band noise. Add an appropriate RC antialias network or buffer and confirm settling over the full input-voltage range. The serial clock edge rate should also be controlled so that coupling into the analog section stays below the required measurement noise floor.

Do not interchange AD977 and AD977A ordering codes solely because both use the same family name. The AD977 is identified as a 100 kSPS part, while the AD977A is identified as a 200 kSPS part. Also verify temperature grade, supply behavior, package, and every pin assignment before substitution. A footprint match alone does not guarantee that a replacement preserves conversion timing, reference performance, or digital control functionality.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance is stated in the AD977ABRSZ component listing. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals qualification is established for the exact ordering code.

数据核验日期: 2026-11-19 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AD977ABRSZ datasheet AD977ABRSZ pinout AD977ABRSZ datasheet pdf AD977ABRSZ specifications AD977ABRSZ equivalent AD977ABRSZ replacement AD977ABRSZ cross reference AD977ABRSZ vs AD977BRSZ AD977 16-bit 200 kSPS ADC AD977ABRSZ SSOP-28 AD977ABRSZ industrial sensor AD977ABRSZ price AD977ABRSZ stock Analog Devices AD977ABRSZ AD977ABRSZ application circuit

相关元器件 & 术语

Analog Devices AD977ABRSZ AD977 AD977A AD977ABRS AD977BRSZ AD977ARBRZ Successive-approximation register ADC SAR ADC Switched-capacitor ADC Analog-to-digital converter Mixed-signal IC 16-bit resolution 200 kSPS throughput Single 5 V supply SPI serial interface Sample-and-hold circuit Internal reference External data-clock synchronization SSOP-28 Surface-mount package Industrial sensor measurement Process monitoring Data acquisition RoHS
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情