Analog Devices

ADM207EAN - 5/3 RS-232 Transceiver, 230kbps | Analog Devices

MPN: ADM207EAN ✓ 啟用中
24-pin PDIP Package
MOQ: 1 |

ADM207EAN 概覽

The Analog Devices ADM207EAN is a 5-driver, 3-receiver RS-232 transceiver rated for data rates up to 230 kbps and supplied in a 24-pin PDIP package. The device combines five RS-232 line drivers and three receivers in one integrated circuit, providing a practical interface between TTL/CMOS logic and unbalanced RS-232 links. Its documented protection features include ±15 kV ESD protection, electromagnetic-immunity compliance, and low EMI emissions.

An RS-232 transceiver is an interface IC that translates between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. Within the broader electronics hierarchy, it belongs to the interface-controller family and connects digital systems to communication ports. A multi-driver and multi-receiver device can consolidate several serial channels onto one printed circuit board while reducing the number of separate line-driver packages.

The ADM207EAN provides five drivers and three receivers, operates at data rates up to 230 kbps, and conforms to the EIA-232E and CCITT V.28 specifications. These characteristics make it suitable for industrial data acquisition, test equipment, point-of-sale terminals, computer peripherals, and embedded control systems. The three receivers are useful for acknowledging handshakes, receiving status signals, or supporting a multidrop arrangement in which several line-driver outputs feed one receiver.

Its integrated protection reduces the need for separate TransZorb devices on exposed serial lines. The documented immunity targets include 8 kV contact discharge, 15 kV air-gap discharge, 15 kV human-body-model ESD protection, and fast-transient-burst immunity under IEC 1000-4-4. Low EMI emissions under EN 55022 are also listed, helping simplify compliance planning for equipment connected to external RS-232 cables.

Typical installations include multi-port industrial controllers, laboratory interfaces, serial concentrators, and legacy peripheral equipment. In these systems, each TTL/CMOS-side channel connects to a host processor, while the corresponding driver output or receiver input connects to the external RS-232 port. The 230 kbps maximum rate supports substantially faster operation than the traditional 20 kbps RS-232 limit, although cable length, capacitance, grounding, and driver slew behavior must still be considered.

A critical layout practice is to keep the transceiver close to the connector and route protected cable-side traces directly to the appropriate pins. Place bypass capacitors near the supply pins, maintain a low-impedance ground reference between the interface and the system, and avoid sharing narrow return paths with sensitive analog signals. The external RS-232 connector should also satisfy applicable product-level ESD and EMC requirements.

This product page combines the manufacturer’s device specifications, interface-family positioning, application guidance, pin and package constraints, and strict drop-in comparison criteria. It also highlights the practical limitations of package variants and functionally similar transceivers so engineers can distinguish a true board-level replacement from a merely similar RS-232 device.

直接替換替代品,適用於 ADM207EAN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: ADM207EAN (相同外形與佔位) — 差異在於 Maximum Data Rate, Product Type.

Analog Devices
Maximum Data Rate: 120 kB/s
Product Type: RS-232 line driver and receiver interface IC
比較對象 ADM207EAN →
Analog Devices
Product Type: RS-232 interface transceiver
比較對象 ADM207EAN →

ADM207EANZ

✅ 直接替換
Analog Devices
📦 24-pin PDIP
RS-232 interface transceiver · 5 channels · 3 channels · +5 V · 230 kbps · EIA-232E · CCITT V.28 · CMOS

聯絡詢價

查看資料表 →

ADM207AN

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 24-pin PDIP
RS-232 line driver and receiver interface IC · +5 V · 5 · 3 · 120 kB/s · ±9 V · ±30 V · 0.1 µF to 10 µF

聯絡詢價

查看資料表 →

ADM207EAN 規格

Driver Count 5
Receiver Count 3
Maximum Data Rate 230 kbps
Interface Standard RS-232
ESD Protection ±15 kV
Contact Discharge 8 kV
Air-Gap Discharge 15 kV
ESD Test Method IEC 801.2, 15 kV human body model
Fast Transient Burst Immunity IEC 1000-4-4
EMI Emissions Standard EN 55022
RS-232 Compliance EIA-232E and CCITT V.28
封裝 24-pin PDIP
Package Type Through-hole PDIP

ADM207EAN through-hole pdip 腳位配置指南

ADM207EAN(through-hole pdip 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ADM207EAN 的 through-hole pdip 封裝腳位圖

無詳細腳位定義資料: ADM207EAN.

請參閱 資料表 以查看完整腳位配置。

典型應用

ADM207EAN 適用於 6 應用s: Industrial Multi-Port Serial Controller, RS-232 Test and Measurement Equipment, Point-of-Sale and Retail Equipment, Computer Peripherals and Legacy Equipment, Embedded Communications Concentrator, Instrumentation and Data-Acquisition Systems.

🏭

Industrial Multi-Port Serial Controller

The ADM207EAN fits industrial controllers that must connect several peripheral buses through one RS-232 interface. Five driver outputs can operate control, status, or handshake channels, while three receiver inputs can accept acknowledgements, remote commands, or fault signals. Its maximum rate of 230 kbps supports faster legacy serial equipment than the traditional 20 kbps RS-232 rate. The integrated ±15 kV ESD protection and IEC 1000-4-4 burst-immunity target improve robustness at connector boundaries, but designers must still provide a controlled ground reference and verify cable length, capacitance, and isolation in the final enclosure.

🔧

RS-232 Test and Measurement Equipment

The ADM207EAN is useful in laboratory instruments that expose multiple RS-232 ports for legacy instruments, fixtures, and service consoles. The five-driver and three-receiver arrangement supports several independently controlled channels without requiring one transceiver package per signal. Operation up to 230 kbps accommodates equipment using faster V.28-class links while retaining compatibility with EIA-232E expectations. Because test systems often route long cables through crowded benches, the device’s 15 kV air-gap and human-body-model ESD ratings provide useful protection margin, although connector selection, grounding, and external surge requirements remain part of the product design.

🖥️

Point-of-Sale and Retail Equipment

Retail terminals can use the ADM207EAN to consolidate serial links to scales, printers, customer displays, and magnetic-stripe peripherals. Five transmit channels provide flexibility for command and status paths, while three receive channels can support device acknowledgements or shared responses. The 230 kbps maximum data rate accommodates short, shielded serial runs at speeds often unavailable from older RS-232 implementations. Integrated ESD protection is particularly valuable when service personnel connect peripheral cables, while documented EN 55022 emissions behavior and fast-transient-burst immunity help structure a robust interface. Firmware must still avoid simultaneous driver conflicts on shared bus segments.

💻

Computer Peripherals and Legacy Equipment

The ADM207EAN is appropriate for peripheral controllers that need to support several legacy RS-232 functions while retaining a modern TTL/CMOS control section. A printer interface, modem control channel, and auxiliary status link can share one package when the board requires five outputs and only three inputs. The 24-pin PDIP format is also convenient for through-hole industrial add-on cards and legacy motherboard designs. At rates up to 230 kbps, the device supports fast short-distance communication, but cable capacitance and timing margin must be checked against the selected data rate. The logic-side supply requirements and shutdown-control behavior should be confirmed from the manufacturer datasheet during schematic design.

🌐

Embedded Communications Concentrator

The ADM207EAN can form the RS-232 side of an embedded communications concentrator that gathers data from several local devices. Five driver outputs may carry independent commands or broadcasts, and the three receiver inputs can collect status from the most active nodes. Its 230 kbps capability makes it practical for high-speed short-distance links in supervisory control and data-acquisition cabinets. The integrated ESD protection reduces connector exposure risk, while IEC 1000-4-4 burst immunity is relevant to electrically noisy industrial environments. Engineers should avoid simultaneous active outputs on the same bus, use the specified transceiver power strategy, and validate grounding with the complete cable and enclosure configuration.

📡

Instrumentation and Data-Acquisition Systems

The ADM207EAN is useful in data-acquisition front ends that retain RS-232 for older sensors, controllers, and service interfaces. Multiple transmitter channels can carry commands to separate devices, and three receiver channels can collect asynchronous acknowledgements or status information. The 230 kbps rate supports compact, short-distance links, but designers should not confuse the IC’s maximum signaling rate with guaranteed performance over every cable length. The device’s ±15 kV ESD protection, 8 kV contact rating, and low-emissions target improve interface robustness in laboratory and industrial installations. Signal conditioning, galvanic isolation, and surge protection should be added when the connected cable leaves the controlled enclosure.

Where can I buy the ADM207EAN?
The ADM207EAN can be ordered through XAIPART’s Request a Quote form on this page, where the required quantity and target quantity can be entered for an availability review. The component is an Analog Devices 5-driver, 3-receiver RS-232 transceiver in a 24-pin PDIP package. For production planning, request the current manufacturer part number exactly as ADM207EAN and identify whether a tube or another approved shipping format is required.
What is the price of the ADM207EAN?
The current commercial terms for the ADM207EAN are handled through XAIPART’s Request a Quote form on this page. The part is a 5/3 RS-232 transceiver with a maximum data rate of 230 kbps in a 24-pin PDIP package. Include your annual and prototype quantities, shipment destination, and required packaging format so the quote reflects the appropriate order configuration.
What is the lead time for the ADM207EAN?
The current lead time for the ADM207EAN should be confirmed through XAIPART’s Request a Quote form on this page. Lead time can depend on order quantity, manufacturing allocation, and the shipping format requested for the 24-pin PDIP device. Engineers evaluating a new RS-232 interface should request a schedule before committing the component to a production release.
Is the ADM207EAN in stock?
Current stock status for the ADM207EAN is handled through XAIPART’s Request a Quote form on this page. The requested quantity should include both prototype and forecast quantities so the response can reflect the appropriate supply position for the 24-pin PDIP package. Because inventory changes continuously, use the quote form rather than relying on a static listing indication.
What is the difference between ADM207EAN and ADM208EAN?
The ADM207EAN contains five RS-232 drivers and three receivers, whereas the ADM208EAN is associated with a four-driver and four-receiver configuration. According to the Analog Devices ADM207E product page, devices in this family support rates up to 230 kbps and conform to EIA-232E and CCITT V.28. The lower receiver count on the ADM207EAN means it is preferable when five transmit channels and three receive channels match the system architecture.
ADM207EAN vs ADM202EAN: which interface IC fits more channels?
The ADM207EAN is the higher-channel-count choice because it provides five drivers and three receivers, while the ADM202EAN is associated with four drivers and two receivers. Both devices appear in the ADM202E and ADM207E family documentation and are available in multiple package styles. Choose the ADM207EAN when two additional driver outputs materially reduce interface-component count and only three receive channels are required.
When should I choose ADM207EAN over a smaller RS-232 transceiver?
Choose the ADM207EAN when the board needs five RS-232 transmit drivers and three receive inputs in one 24-pin PDIP device. A smaller transceiver is preferable only when its driver and receiver counts match the design without wasting channels. The ADM207EAN’s 230 kbps capability and EIA-232E and CCITT V.28 conformance also make it appropriate for established RS-232 equipment with multiple peripheral connections.
Is the ADM207EAN suitable for industrial RS-232 equipment?
The ADM207EAN is suitable for industrial RS-232 interfaces requiring multiple channels, ESD protection, and electromagnetic-immunity capability. Its documented features include ±15 kV ESD protection, 8 kV contact discharge, 15 kV air-gap discharge, IEC 1000-4-4 fast-transient-burst immunity, and EN 55022 EMI-emissions compliance. Final product suitability still depends on cable design, enclosure construction, grounding, and system-level EMC testing.
What can replace the ADM207EAN?
A true drop-in replacement for the ADM207EAN must use the same 24-pin PDIP footprint, preserve pin-to-pin functions, and provide the required five-driver, three-receiver RS-232 configuration. Similar parts such as the ADM208EAN and ADM202EAN have different channel counts, so they are not direct replacements without confirming board-level requirements. Use XAIPART’s Request a Quote form and provide the original schematic and pinout when requesting a replacement review.
What is the best Texas Instruments equivalent for the ADM207EAN?
No Texas Instruments equivalent is established here as a verified 24-pin PDIP, five-driver, three-receiver drop-in replacement for the ADM207EAN. Selecting an RS-232 interface solely by data rate can overlook enable logic, shutdown behavior, supply voltage, receiver count, and channel polarity. A candidate should be checked against the original schematic and manufacturer pin-description table before it can be treated as a board-level replacement.
Where can I download the ADM207EAN datasheet PDF?
The ADM207EAN datasheet and family information are available from Analog Devices through the manufacturer product page linked on this page. The document identifies the device as a 5/3 RS-232 transceiver and provides the electrical characteristics, pin descriptions, protection information, and application details needed for schematic review. Use the package drawing and pin-description table to assign PCB nets and confirm the 24-pin PDIP footprint.
Where can I find the ADM207EAN pinout?
The ADM207EAN pin assignments are listed in the pin-description table of the Analog Devices manufacturer datasheet. The device uses a 24-pin PDIP package, but connector orientation and exposed-side numbering must be checked against the exact drawing in that document. PCB designers should verify every driver, receiver, supply, ground, and enable connection rather than relying on the family-level package outline.
What are the key specifications of ADM207EAN that engineers should know?
The ADM207EAN combines five RS-232 drivers, three receivers, and operation up to 230 kbps in a 24-pin PDIP package. According to the Analog Devices ADM207E product page, the family conforms to the EIA-232E and CCITT V.28 specifications. Protection features include ±15 kV ESD protection, 8 kV contact discharge, 15 kV air-gap discharge, IEC 1000-4-4 burst immunity, and EN 55022 low EMI emissions.
Does the ADM207EAN need external TransZorb protection?
The ADM207EAN includes integrated ESD protection and is designed to reduce the need for separate TransZorb devices on its RS-232 lines. Its documented protection includes 8 kV contact discharge, 15 kV air-gap discharge, and a 15 kV human-body-model rating. This does not remove the need to assess the complete product, connector, cable, and enclosure; system-level compliance may impose additional protection requirements.
How should the ADM207EAN RS-232 interface be laid out?
Place the ADM207EAN close to the external RS-232 connector and route cable-side signals directly to the relevant device pins. Keep logic-side traces away from high-voltage transition nodes, provide local supply bypassing, and establish a low-impedance return path for the interface ground. The manufacturer’s typical application information and datasheet layout guidance should be followed before adding external protection or filtering.

工程參考資料,適用於 ADM207EAN — 比較、設計指引及合規資訊。

選型指南

Choose the ADM207EAN when a new RS-232 board needs five transmit drivers, three receive inputs, operation up to 230 kbps, and integrated ±15 kV ESD protection in a 24-pin PDIP package. It is particularly useful for multi-port industrial controllers, legacy peripheral interfaces, and test equipment. Select the ADM208EAN instead when four receivers are preferable to five drivers, because that family member has a four-driver and four-receiver organization. Select the ADM202EAN for a four-driver and two-receiver arrangement. A discrete driver such as the MC1489NG4 can be appropriate for a simpler point-to-point design, but it does not reproduce the ADM207EAN’s integrated 5/3 channel arrangement. Before committing to a replacement, verify the 24-pin PDIP footprint, pin assignments, supply voltage, enable and shutdown behavior, driver direction, and protection requirements against the manufacturer datasheet.

與替代品比較

參數 本產品
Driver Count 5
Receiver Count 3
Maximum Data Rate 230 kbps
Interface Standard RS-232
Package 24-pin PDIP
Brand Analog Devices
ESD Protection ±15 kV
Contact Discharge 8 kV
Air-Gap Discharge 15 kV
Fast Transient Burst IEC 1000-4-4
EMI Emissions EN 55022
Specification Conformance EIA-232E and CCITT V.28

主要差異化特點

  • Higher transmitter-channel count (對比ADM202EAN)
  • Different receive-channel balance (對比ADM208EAN)
  • Integrated multi-line ESD protection (對比MC1489NG4)

設計說明

Place the ADM207EAN close to the RS-232 connector and route cable-side driver and receiver traces directly to their corresponding pins. Keep the logic-side traces physically separated from these lines to reduce coupling into sensitive control circuitry. Preserve the package’s pin-one orientation in the PCB footprint and verify the pin-description table in the manufacturer datasheet before releasing artwork.

Do not allow two enabled ADM207EAN driver outputs to drive the same RS-232 node simultaneously. Their opposing outputs can create excessive current, unpredictable voltage levels, and unnecessary EMI. Assign driver directions in firmware or hardware so only one transmitter is active at a time, especially in multidrop arrangements using the three receiver inputs.

Return the RS-232 signal reference through a low-impedance ground path rather than relying on the cable shield as the sole return conductor. Use the connector shell and shield according to the product’s grounding strategy, and keep switching supplies and high-current return paths away from the logic ground reference. Validate radiated and conducted emissions at the completed product level because IC-level EN 55022 behavior does not replace enclosure and cable testing.

Treat 230 kbps as a maximum device capability, not a blanket guarantee for every cable run. RS-232 timing margin depends on line capacitance, cable length, driver loading, receiver threshold behavior, and grounding. For long or high-capacitance cables, reduce the baud rate, add suitable line conditioning, or choose a communication standard designed for longer distances and multipoint networks.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The documented interface qualifications include EIA-232E, CCITT V.28, IEC 801.2 human-body-model ESD testing, IEC 1000-4-4 fast-transient-burst immunity, and EN 55022 EMI-emissions performance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the product information.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

ADM207EAN datasheet ADM207EAN pinout ADM207EAN datasheet pdf ADM207EAN specifications ADM207EAN 24-PDIP ADM207EAN RS-232 transceiver ADM207EAN 230kbps ADM207EAN ESD protection ADM207EAN equivalent ADM207EAN replacement ADM207EAN vs ADM208EAN Analog Devices ADM207EAN ADM207EAN price ADM207EAN stock

相關元件與詞彙

Analog Devices ADM207EAN ADM207E ADM208EAN ADM202EAN RS-232 transceiver RS-232 EIA-232E CCITT V.28 line driver line receiver interface IC digital interface semiconductor 230 kbps ±15 kV ESD protection IEC 801.2 IEC 1000-4-4 EN 55022 PDIP-24 through-hole package industrial control data acquisition legacy serial interface
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情