Texas Instruments

ADS7809PB - 16-Bit 100kHz Serial ADC | Texas Instruments

MPN: ADS7809PB ✓ 啟用中
+5 V single supply Vdss 20-pin PDIP Package
MOQ: 1 |

ADS7809PB 概覽

Texas Instruments ADS7809PB is a 16-bit, 100 kHz sampling, serial-output CMOS analog-to-digital converter housed in a 20-pin PDIP package. It provides ±2 LSB integral nonlinearity, 16-bit differential nonlinearity with no missing codes, 86 dB SINAD for a 20 kHz input, and six specified input ranges. The converter operates from a single +5 V supply and supports internal or external references.

An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code for processing, measurement, control, or storage. The ADS7809 belongs to the sampling ADC hierarchy, specifically a successive-approximation-register converter with integrated sample-and-hold, clock, reference, and serial interface. These functions simplify instrumentation designs while preserving the throughput and resolution needed for precision control and measurement systems.

Key features include a maximum sampling rate of 100 kHz, 16-bit resolution, and six selectable input ranges. According to the Texas Instruments product page and manufacturer datasheet, the converter achieves 86 dB SINAD with a 20 kHz input and is pin-compatible with the 12-bit ADS7808. A serial interface simplifies connection to processors, DSPs, and programmable logic without requiring a parallel data bus.

Internally, the ADS7809 uses a capacitor-based successive-approximation architecture with an inherent sample-and-hold function, precision reference circuitry, an internal clock, and a serial output stage. The sampling process supports continuous conversion at up to 100 kHz, while the specified input architecture allows engineers to select ranges suited to bipolar or unipolar sensor signals. Maximum power dissipation is 100 mW under the stated operating conditions.

Typical applications include industrial process monitoring, precision instrumentation, audio and communications signal measurement, industrial automation, and embedded sensor acquisition. The 100 kHz sampling rate is suitable for many industrial and control signals, while 16-bit resolution preserves low-level detail in measurements that do not require high-frequency waveform capture.

When laying out the circuit, treat analog input, reference, and power-return connections as high-impedance paths even though the converter itself is digital. Keep input and reference traces short, provide the specified bypass capacitance near the supply pins, and route converter ground carefully with the analog signal source to minimize conversion error.

This product page combines the ADS7809PB electrical characteristics, package details, sourcing information, comparison fields, and practical design guidance into a concise engineering reference. Use the manufacturer pin-description table and application circuit when finalizing PCB assignments, input conditioning, and decoupling.

直接替換替代品,適用於 ADS7809PB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

ADS7809PB 最大額定值與電氣特性

Converter Type 16-bit sampling successive-approximation-register ADC
解析度 16 bit
取樣率 100 kHz
Conversion Time 10 us
Integral Nonlinearity ±2 LSB
Differential Nonlinearity 16 bit, no missing codes
Signal-to-Noise and Distortion 86 dB with 20 kHz input
Number of Specified Input Ranges 6 ranges
供應電壓 +5 V single supply
Reference Internal or external reference
Digital Interface Serial CMOS output
Maximum Power Dissipation 100 mW
封裝 20-pin PDIP
安裝類型 Through-hole package
Pin Compatibility Compatible with 12-bit ADS7808
RoHS 狀態 Compliant, unitless status classification

ADS7809PB 20-pin pdip 腳位配置指南

ADS7809PB(20-pin pdip 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

ADS7809PB 的 20-pin pdip 封裝腳位圖

無詳細腳位定義資料: ADS7809PB.

請參閱 資料表 以查看完整腳位配置。

典型應用

ADS7809PB 適用於 6 應用s: Industrial Process Monitoring, Precision Sensor Acquisition, Audio and Communications Measurement, Control and Feedback Loops, Test and Measurement Instrumentation, Data Acquisition and Logging.

🏭

Industrial Process Monitoring

The ADS7809PB fits industrial process monitoring where sensor signals require more resolution than a 12-bit ADC while 100 kHz sampling remains sufficient. Its 16-bit conversion capability, ±2 LSB integral nonlinearity, and six selectable input ranges help preserve low-level information from pressure, temperature, and level transducers. Place the converter behind a protected input network, reference it cleanly, and use the single +5 V supply arrangement shown in the manufacturer application information. The 100 kHz sampling rate supports rapidly updated process channels, while the serial interface reduces data-bus burden on an embedded controller.

🧩

Precision Sensor Acquisition

ADS7809PB is appropriate for precision sensor acquisition when transducer output levels are small and quantization error must remain below the measurement noise floor. Its 16-bit resolution gives 65,536 digital codes, while the specified ±2 LSB integral nonlinearity and 16-bit differential nonlinearity support accurate conversion of conditioned sensor outputs. Use one of the six specified input ranges to match the signal amplitude, then maintain a low-noise reference and short analog trace. The serial output is effective for connecting the measurement channel to a DSP or embedded processor without a wide parallel bus.

🌐

Audio and Communications Measurement

The ADS7809PB can support audio and communications measurement channels that require 16-bit conversion resolution without megahertz-class sampling. Its 86 dB SINAD with a 20 kHz input provides a useful dynamic-performance specification, and the 100 kHz sampling rate is sufficient for many control, monitoring, and baseband measurement tasks. Configure the converter with a suitable specified input range, preserve signal symmetry through balanced input conditioning, and isolate digital return currents from the analog path. The serial interface permits compact implementation in multichannel instrumentation where parallel buses would consume additional board area.

🔧

Control and Feedback Loops

ADS7809PB can be used in moderate-bandwidth control and feedback systems where the controller must observe a conditioned analog variable and update it at a controlled rate. A 100 kHz conversion capability and 10 us conversion time allow the acquisition path to operate well ahead of many industrial control loops. Select the closest input range to maximize use of the converter's 16-bit scale, then apply the required anti-alias filtering before the analog input. Digital isolation and filtering should account for both the serial interface timing and the time required for the sample-and-hold stage to acquire the input signal.

🖥️

Test and Measurement Instrumentation

ADS7809PB suits precision test and measurement equipment that needs a compact 16-bit input channel with flexible scaling. Six specified input ranges allow one converter design to cover several signal amplitudes, while internal or external reference selection supports both standalone and externally calibrated instruments. For laboratory-grade results, treat the reference network and input-conditioning components as part of the measurement accuracy budget. The serial output can feed a DSP, FPGA, or processor, but the receiving firmware must handle conversion timing and correctly interpret the 16-bit result from the manufacturer-defined serial format.

📡

Data Acquisition and Logging

ADS7809PB is useful in compact data-acquisition systems where each channel must capture analog measurements with 16-bit resolution and transmit them through a serial link. Its 100 kHz sampling rate supports continuous acquisition from sensors, potentiometers, and conditioned bridge outputs, while the 10 us conversion time provides sufficient throughput for many multichannel systems. Schedule acquisitions so analog settling completes before sampling, and account for multiplexing time when several sources share one converter. The serial interface helps limit processor pin count, but firmware should include range, reference, and conversion-status handling for accurate logging.

What are the key specifications of ADS7809PB that engineers should know?
The ADS7809PB is a 16-bit, 100 kHz serial-output sampling ADC with a 10 us conversion time, ±2 LSB integral nonlinearity, and 86 dB SINAD for a 20 kHz input. According to the Texas Instruments ADS7809 product page, it supports six input ranges, internal or external referencing, and operation from a single +5 V supply. The device is packaged in a 20-pin PDIP and is pin-compatible with the 12-bit ADS7808, which can simplify mixed-resolution board planning.
Where can I download the ADS7809PB datasheet PDF?
The official ADS7809PB datasheet is available through the Texas Instruments ADS7809 product page at https://www.ti.com/product/ADS7809. Use the manufacturer documentation for the authoritative pin descriptions, electrical characteristics, input-range table, reference configuration, and application circuit. The ADS7809PB designation identifies the 20-pin PDIP package option, while the base ADS7809 family may include other package suffixes with different mechanical details.
What does pin-compatible with ADS7808 mean for ADS7809PB?
The ADS7809PB is pin-compatible with the 12-bit ADS7808 according to the Texas Instruments product page. This means the related device can share the same 20-pin PDIP footprint and established board-routing pattern, but its conversion resolution differs: ADS7809PB provides 16 bits while ADS7808 provides 12 bits. Confirm input range, reference configuration, acquisition timing, and serial-data behavior in the manufacturer documentation before substituting one device for the other.
What is the sampling rate of ADS7809PB?
The ADS7809PB samples at up to 100 kHz and performs conversion in 10 us. According to the Texas Instruments product page, it is a 16-bit CMOS sampling ADC with an internal clock, reference, sample-and-hold function, and serial output interface. This throughput is appropriate for many precision industrial, instrumentation, communications, and embedded-control signals that do not require kilomegahertz waveform acquisition.
What input ranges and references does ADS7809PB support?
The ADS7809PB supports six specified input ranges and can use either its internal reference or an external reference. The Texas Instruments product page identifies these functions, while the manufacturer datasheet defines the selectable range values, polarity, input impedance, and reference requirements. The exact range boundaries are not reproduced on this page; use the datasheet input-range table to select the correct sensor signal scaling.
Is ADS7809PB suitable for industrial sensor acquisition?
The ADS7809PB is suitable for many industrial sensor-acquisition systems because it combines 16-bit resolution, a 100 kHz sampling rate, six input ranges, and single +5 V operation. According to the Texas Instruments product page, its 86 dB SINAD with a 20 kHz input supports precision measurement, while its serial interface reduces wiring to a processor or DSP. Front-end protection, filtering, grounding, and reference stability still determine practical system accuracy.
How should the ADS7809PB be used with a microprocessor or DSP?
Connect the ADS7809PB serial interface to the processor or DSP and initiate a conversion after the analog input settles. According to the Texas Instruments product page, the converter includes an internal clock, reference, sample-and-hold stage, and serial output, so a complete acquisition channel can be built with few external components. Use the manufacturer timing diagram to establish chip-select, conversion-start, data-ready, and serial-clock timing for the selected processor interface.
What are the differences between ADS7809PB and ADS7808?
The principal documented difference is resolution: ADS7809PB is a 16-bit converter, while the ADS7808 is a 12-bit converter. The Texas Instruments product page states that ADS7809PB is pin-compatible with ADS7808, allowing a shared package footprint, but it does not establish that every operating condition or function is identical. Verify resolution requirements, conversion timing, input configuration, reference behavior, serial timing, and acquisition logic before using ADS7809PB in place of ADS7808.
When should I choose ADS7809PB over a lower-resolution ADC?
Choose ADS7809PB when measurement resolution is more important than minimizing digital data volume or system cost. Its 16-bit resolution provides four times the code count of a 12-bit converter, while the 100 kHz sampling rate supports moderately fast acquisition. For slowly changing sensors with only a few effective bits, a lower-resolution device may be sufficient; for precision measurements, instrumentation, or transducers with weak outputs, ADS7809PB offers useful conversion headroom.
Can ADS7809PB replace ADS7808 in an existing PCB?
ADS7809PB can share the ADS7808 footprint because Texas Instruments identifies the devices as pin-compatible, but replacement still requires a full electrical and timing review. The ADS7809PB has 16-bit resolution rather than the ADS7808's 12 bits, and the serial data representation may require different framing or scaling in the receiving firmware. Confirm supply voltage, input range, reference configuration, acquisition timing, and digital-interface behavior before production substitution.
What can replace ADS7809PB as a pin-compatible ADC?
The most direct documented replacement is the other ADS7809 package option when its mechanical package matches the target board. However, the available cross-reference information does not establish five drop-in alternatives in the same 20-pin PDIP package with comparable 16-bit, 100 kHz performance. A component engineer should search manufacturer cross-reference tools for exact package, resolution, sampling rate, input range, reference, and pin assignments rather than treating a different package or function as a drop-in replacement.
Is ADS7809PB the same as ADS7815U?
The ADS7809PB is not established as a same-package replacement for the ADS7815U. The available comparison identifies ADS7815U as a 16-bit sampling ADC with a 250 kHz throughput rate, while ADS7809PB is a 100 kHz converter in a 20-pin PDIP package. The ADS7815U package and detailed pin assignments must be checked before considering a board-level substitution; differing packages would require PCB changes and disqualify a strict drop-in replacement.
What is the best Texas Instruments alternative to ADS7809PB?
There is no additional Texas Instruments drop-in alternative established by the available cross-reference information. ADS7809U and ADS7809UB are family members, but their package suffixes must be checked against ADS7809PB's 20-pin PDIP footprint. Use the Texas Instruments cross-reference search and compare the exact mechanical drawing, pinout, input ranges, conversion timing, reference arrangement, and serial protocol; a family relationship alone does not establish drop-in compatibility.
Where can I buy ADS7809PB online?
Use the Request a Quote form on this ADS7809PB page to request current availability, package quantity, and lead time from XAIPART. The component is also indexed under manufacturer part ADS7809PB, so provide the complete suffix when submitting a request. Commercial availability can change, and a distributor search result does not by itself confirm stock for the quantity, grade, or shipping configuration required by your design.
What is the price of ADS7809PB?
Use the Request a Quote form on this page for the current unit price, stock position, and quantity-break information for ADS7809PB. Pricing depends on order quantity, package configuration, sourcing condition, and market availability, so a static figure can become inaccurate quickly. Include your annual demand, target packaging, and required delivery schedule with the request to obtain a purchase quotation tailored to the actual BOM quantity.
What is the lead time and stock status for ADS7809PB?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. The Texas Instruments ADS7809 family is identified as an active product, but lifecycle status does not guarantee immediate availability for every package suffix or purchase quantity. State the required quantity and production schedule in the request so XAIPART can confirm the current channel position and expected fulfillment timing.
Where is the ADS7809PB pinout located?
The ADS7809PB pinout is published in the pin-configuration section of the manufacturer ADS7809 datasheet linked from the Texas Instruments product page. Use that diagram to verify the 20-pin PDIP assignments for supply, ground, analog inputs, reference, control, and serial data. Exact pin names are not reproduced here because the available manufacturer extract does not list every terminal; assign PCB nets directly from the official package drawing.

工程參考資料,適用於 ADS7809PB — 比較、設計指引及合規資訊。

選型指南

Choose ADS7809PB for a 20-pin PDIP design that needs 16-bit resolution, up to 100 kHz sampling, six selectable input ranges, and operation from a single +5 V supply. It is particularly useful when system accuracy depends on retaining low-level sensor information and the serial interface must connect to a processor, DSP, or programmable logic without a wide parallel bus. ADS7808 may be sufficient where 12-bit resolution is acceptable, but ADS7809PB offers four times the code count on the documented pin-compatible footprint. ADS7815U offers a higher stated throughput of 250 kHz, making it relevant only after its package and pin assignments are confirmed to match the board. Other ADS7809 suffix options should be considered by exact package rather than by family name. For production sourcing, verify current lifecycle status, package availability, and the exact electrical and timing requirements for the selected manufacturer part number.

與替代品比較

參數 本產品
Brand Texas Instruments
Package 20-pin PDIP
Resolution 16 bit
Sampling Rate 100 kHz
Conversion Time 10 us
Integral Nonlinearity ±2 LSB
SINAD 86 dB with 20 kHz input
Supply Single +5 V
Input Ranges 6 specified ranges
Reference Internal or external
Digital Interface Serial CMOS output
Power Dissipation 100 mW maximum

主要差異化特點

  • Higher conversion resolution than the documented pin-compatible ADS7808 (對比ADS7808)
  • Lower stated throughput than the ADS7815U (對比ADS7815U)
  • Single-supply operation with flexible input scaling (對比ADS7809U)

設計說明

Keep the analog input, reference, and ground paths compact and away from high-current switching nodes. Place the manufacturer-recommended bypass capacitors directly at the +5 V and ground pins, and route the analog trace over a continuous ground plane. The 16-bit resolution and ±2 LSB integral nonlinearity create useful performance only when the PCB does not add comparable input noise, ground error, or reference disturbance.

Design the input network so the source impedance and settling time meet the manufacturer's acquisition requirements. The sample-and-hold stage must charge to the selected range before conversion, so excessive source impedance or capacitance can create gain error or incomplete settling. Place any anti-alias or protection components close to the input pin, and use the datasheet timing diagram to establish when the conversion command should be issued.

Treat reference routing as part of the precision signal path. Use the internal reference only when its dynamic behavior is acceptable, or provide an external reference with the required stability and decoupling. Avoid routing digital clock and serial-data traces beneath the analog and reference pins, and connect the package ground pins using the shortest practical return paths. These measures reduce coupling of switching and serial-interface energy into the sampled result.

Do not infer that pin compatibility with the ADS7808 makes every operating condition identical. ADS7809PB provides 16-bit resolution, whereas ADS7808 provides 12 bits, so output scaling, noise characteristics, acquisition timing, and firmware interpretation must be reviewed. Similarly, do not treat the ADS7815U as a direct substitute merely because both devices are 16-bit ADCs; its 250 kHz throughput specification differs from the ADS7809's 100 kHz rate.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The product listing identifies ADS7809PB as RoHS compliant. No manufacturer qualification statement for AEC-Q100, REACH, lead-free construction, halogen-free construction, or conflict-minerals reporting was identified.

相關搜尋

ADS7809PB datasheet ADS7809PB datasheet pdf ADS7809PB pinout ADS7809PB specifications ADS7809PB equivalent ADS7809PB replacement ADS7809PB cross reference ADS7809PB price ADS7809PB stock Texas Instruments ADS7809PB ADS7809PB 16 bit ADC ADS7809PB PDIP-20 ADS7809PB application circuit ADS7809PB vs ADS7808 ADS7809PB vs ADS7815U

相關元件與詞彙

Texas Instruments ADS7809PB ADS7809 ADS7808 ADS7815U analog-to-digital converter ADC sampling ADC successive-approximation register SAR ADC mixed-signal IC 16-bit resolution 100 kHz sampling rate 86 dB SINAD single +5 V supply serial CMOS interface internal reference external reference 20-pin PDIP through-hole package industrial process monitoring precision sensor acquisition test and measurement sample-and-hold RoHS
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情