ADS7809PB - 16-Bit 100kHz Serial ADC | Texas Instruments
MPN: ADS7809PB ✓ فعالADS7809PB نمای کلی
An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code for processing, measurement, control, or storage. The ADS7809 belongs to the sampling ADC hierarchy, specifically a successive-approximation-register converter with integrated sample-and-hold, clock, reference, and serial interface. These functions simplify instrumentation designs while preserving the throughput and resolution needed for precision control and measurement systems.
Key features include a maximum sampling rate of 100 kHz, 16-bit resolution, and six selectable input ranges. According to the Texas Instruments product page and manufacturer datasheet, the converter achieves 86 dB SINAD with a 20 kHz input and is pin-compatible with the 12-bit ADS7808. A serial interface simplifies connection to processors, DSPs, and programmable logic without requiring a parallel data bus.
Internally, the ADS7809 uses a capacitor-based successive-approximation architecture with an inherent sample-and-hold function, precision reference circuitry, an internal clock, and a serial output stage. The sampling process supports continuous conversion at up to 100 kHz, while the specified input architecture allows engineers to select ranges suited to bipolar or unipolar sensor signals. Maximum power dissipation is 100 mW under the stated operating conditions.
Typical applications include industrial process monitoring, precision instrumentation, audio and communications signal measurement, industrial automation, and embedded sensor acquisition. The 100 kHz sampling rate is suitable for many industrial and control signals, while 16-bit resolution preserves low-level detail in measurements that do not require high-frequency waveform capture.
When laying out the circuit, treat analog input, reference, and power-return connections as high-impedance paths even though the converter itself is digital. Keep input and reference traces short, provide the specified bypass capacitance near the supply pins, and route converter ground carefully with the analog signal source to minimize conversion error.
This product page combines the ADS7809PB electrical characteristics, package details, sourcing information, comparison fields, and practical design guidance into a concise engineering reference. Use the manufacturer pin-description table and application circuit when finalizing PCB assignments, input conditioning, and decoupling.
جایگزینهای drop-in برای ADS7809PB — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینADS7809PB حداکثر مقادیر مجاز و مشخصات الکتریکی
| Converter Type | 16-bit sampling successive-approximation-register ADC |
| رزولوشن | 16 bit |
| نرخ نمونهبرداری | 100 kHz |
| Conversion Time | 10 us |
| Integral Nonlinearity | ±2 LSB |
| Differential Nonlinearity | 16 bit, no missing codes |
| Signal-to-Noise and Distortion | 86 dB with 20 kHz input |
| Number of Specified Input Ranges | 6 ranges |
| ولتاژ تغذیه | +5 V single supply |
| Reference | Internal or external reference |
| Digital Interface | Serial CMOS output |
| Maximum Power Dissipation | 100 mW |
| بستهبندی | 20-pin PDIP |
| نوع نصب | Through-hole package |
| Pin Compatibility | Compatible with 12-bit ADS7808 |
| وضعیت RoHS | Compliant, unitless status classification |
راهنمای پیکربندی پین ADS7809PB 20-pin pdip
پیکربندی پین برای ADS7809PB (پکیج 20-pin pdip). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای ADS7809PB.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ADS7809PB مناسب است برای 6 کاربردs: Industrial Process Monitoring, Precision Sensor Acquisition, Audio and Communications Measurement, Control and Feedback Loops, Test and Measurement Instrumentation, Data Acquisition and Logging.
Industrial Process Monitoring
The ADS7809PB fits industrial process monitoring where sensor signals require more resolution than a 12-bit ADC while 100 kHz sampling remains sufficient. Its 16-bit conversion capability, ±2 LSB integral nonlinearity, and six selectable input ranges help preserve low-level information from pressure, temperature, and level transducers. Place the converter behind a protected input network, reference it cleanly, and use the single +5 V supply arrangement shown in the manufacturer application information. The 100 kHz sampling rate supports rapidly updated process channels, while the serial interface reduces data-bus burden on an embedded controller.
پیشنهادی
Precision Sensor Acquisition
ADS7809PB is appropriate for precision sensor acquisition when transducer output levels are small and quantization error must remain below the measurement noise floor. Its 16-bit resolution gives 65,536 digital codes, while the specified ±2 LSB integral nonlinearity and 16-bit differential nonlinearity support accurate conversion of conditioned sensor outputs. Use one of the six specified input ranges to match the signal amplitude, then maintain a low-noise reference and short analog trace. The serial output is effective for connecting the measurement channel to a DSP or embedded processor without a wide parallel bus.
پیشنهادی
Audio and Communications Measurement
The ADS7809PB can support audio and communications measurement channels that require 16-bit conversion resolution without megahertz-class sampling. Its 86 dB SINAD with a 20 kHz input provides a useful dynamic-performance specification, and the 100 kHz sampling rate is sufficient for many control, monitoring, and baseband measurement tasks. Configure the converter with a suitable specified input range, preserve signal symmetry through balanced input conditioning, and isolate digital return currents from the analog path. The serial interface permits compact implementation in multichannel instrumentation where parallel buses would consume additional board area.
پیشنهادی
Control and Feedback Loops
ADS7809PB can be used in moderate-bandwidth control and feedback systems where the controller must observe a conditioned analog variable and update it at a controlled rate. A 100 kHz conversion capability and 10 us conversion time allow the acquisition path to operate well ahead of many industrial control loops. Select the closest input range to maximize use of the converter's 16-bit scale, then apply the required anti-alias filtering before the analog input. Digital isolation and filtering should account for both the serial interface timing and the time required for the sample-and-hold stage to acquire the input signal.
پیشنهادی
Test and Measurement Instrumentation
ADS7809PB suits precision test and measurement equipment that needs a compact 16-bit input channel with flexible scaling. Six specified input ranges allow one converter design to cover several signal amplitudes, while internal or external reference selection supports both standalone and externally calibrated instruments. For laboratory-grade results, treat the reference network and input-conditioning components as part of the measurement accuracy budget. The serial output can feed a DSP, FPGA, or processor, but the receiving firmware must handle conversion timing and correctly interpret the 16-bit result from the manufacturer-defined serial format.
پیشنهادی
Data Acquisition and Logging
ADS7809PB is useful in compact data-acquisition systems where each channel must capture analog measurements with 16-bit resolution and transmit them through a serial link. Its 100 kHz sampling rate supports continuous acquisition from sensors, potentiometers, and conditioned bridge outputs, while the 10 us conversion time provides sufficient throughput for many multichannel systems. Schedule acquisitions so analog settling completes before sampling, and account for multiplexing time when several sources share one converter. The serial interface helps limit processor pin count, but firmware should include range, reference, and conversion-status handling for accurate logging.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ADS7809PB — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | Texas Instruments |
| Package | 20-pin PDIP |
| Resolution | 16 bit |
| Sampling Rate | 100 kHz |
| Conversion Time | 10 us |
| Integral Nonlinearity | ±2 LSB |
| SINAD | 86 dB with 20 kHz input |
| Supply | Single +5 V |
| Input Ranges | 6 specified ranges |
| Reference | Internal or external |
| Digital Interface | Serial CMOS output |
| Power Dissipation | 100 mW maximum |
تفاوتهای کلیدی
- Higher conversion resolution than the documented pin-compatible ADS7808 (در مقابلADS7808)
- Lower stated throughput than the ADS7815U (در مقابلADS7815U)
- Single-supply operation with flexible input scaling (در مقابلADS7809U)
یادداشتهای طراحی
Keep the analog input, reference, and ground paths compact and away from high-current switching nodes. Place the manufacturer-recommended bypass capacitors directly at the +5 V and ground pins, and route the analog trace over a continuous ground plane. The 16-bit resolution and ±2 LSB integral nonlinearity create useful performance only when the PCB does not add comparable input noise, ground error, or reference disturbance.
Design the input network so the source impedance and settling time meet the manufacturer's acquisition requirements. The sample-and-hold stage must charge to the selected range before conversion, so excessive source impedance or capacitance can create gain error or incomplete settling. Place any anti-alias or protection components close to the input pin, and use the datasheet timing diagram to establish when the conversion command should be issued.
Treat reference routing as part of the precision signal path. Use the internal reference only when its dynamic behavior is acceptable, or provide an external reference with the required stability and decoupling. Avoid routing digital clock and serial-data traces beneath the analog and reference pins, and connect the package ground pins using the shortest practical return paths. These measures reduce coupling of switching and serial-interface energy into the sampled result.
Do not infer that pin compatibility with the ADS7808 makes every operating condition identical. ADS7809PB provides 16-bit resolution, whereas ADS7808 provides 12 bits, so output scaling, noise characteristics, acquisition timing, and firmware interpretation must be reviewed. Similarly, do not treat the ADS7815U as a direct substitute merely because both devices are 16-bit ADCs; its 250 kHz throughput specification differs from the ADS7809's 100 kHz rate.
اطلاعات انطباق
The product listing identifies ADS7809PB as RoHS compliant. No manufacturer qualification statement for AEC-Q100, REACH, lead-free construction, halogen-free construction, or conflict-minerals reporting was identified.