AK4424AET - 24-Bit Stereo DAC with 2Vrms Output | AKM
MPN: AK4424AET ✗ 停產AK4424AET 概覽
A delta-sigma DAC is a voltage-output data converter that uses oversampling, noise shaping, and digital filtering to convert multi-bit PCM audio samples into a continuous analog waveform. The AK4424 belongs to the broader ADC/DAC hierarchy, combining a digital-to-analog converter, low-noise output driver, clock interface, and analog supply circuitry in one integrated circuit. Its integrated buffer simplifies analog output design while reducing board area compared with discrete buffer stages.
The AK4424 uses AKM's multi-bit modulator architecture to improve linearity and THD+N performance across the audio band. A charge pump associated with the output buffer creates an internal negative supply rail, allowing the output stage to swing below ground and produce a true 2 Vrms output. This ground-referenced capability supports balanced and unbalanced audio paths without requiring a separate negative analog supply at the converter output.
The converter accepts 24-bit digital audio data while operating from a 5 V supply. Its 192 kHz capability suits high-resolution music servers, studio monitors, broadcast equipment, and digital audio consoles. The integrated 2 Vrms output buffer is particularly useful when the DAC drives downstream analog stages directly, reducing component count and simplifying the analog output topology.
Typical uses include premium CD and network audio players, professional headphone amplifiers, studio monitor controller boards, digital mixing consoles, and home theater audio processors. The 2 Vrms output is also appropriate for line-level inputs in consumer and industrial audio systems where dynamic headroom is required. Clocking and interface implementation should follow the manufacturer application guidance to maintain data validity and minimize jitter-related performance loss.
For a new design, verify that the selected board layout reproduces the recommended grounding, decoupling, and output-stage topology. Decoupling capacitance and placement are important because a high-performance audio DAC can be limited by supply impedance or trace inductance even when its intrinsic converter performance is strong. Confirm the complete pin assignment and exposed-pad treatment in the manufacturer datasheet before routing the PCB.
This page consolidates the converter's published architecture and packaging information with design guidance, application fit, and procurement paths. It also identifies where detailed electrical limits, clock tables, and absolute maximum ratings must be checked in the original manufacturer documentation before a production release.
直接替換替代品,適用於 AK4424AET — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AK4424AET (相同外形與佔位) — 差異在於 Maximum Sampling Rate, Modulator Architecture.
AK4424AET 最大額定值與電氣特性
| Product Type | 24-bit stereo delta-sigma DAC |
| 供應電壓 | 5 V |
| 解析度 | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| 輸出配置 | Stereo, 2 Vrms |
| Output Buffer | Integrated |
| Output Reference | Ground referenced |
| Internal Negative Rail | Charge-pump generated |
| Modulator Architecture | Multi-bit modulator |
| 封裝 | 16-pin LQFP, tape-and-reel shipping format |
| 安裝類型 | Surface Mount |
AK4424AET 16-pin lqfp, tape-and-reel shipping format 腳位配置指南
AK4424AET(16-pin lqfp, tape-and-reel shipping format 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AK4424AET.
請參閱 資料表 以查看完整腳位配置。
典型應用
AK4424AET 適用於 6 應用s: High-End Network Audio Player, Professional Headphone Amplifier, Studio Monitor Controller, Digital Mixing Console, Home Theater Audio Processor, Premium CD Player.
High-End Network Audio Player
The AK4424AET fits a network audio player because it converts 24-bit PCM streams at rates up to 192 kHz and directly produces a 2 Vrms stereo analog output. Its integrated buffer removes the usual discrete line-output stage and preserves ground-referenced signal swing through the charge-pump-assisted output buffer. Place the DAC close to the analog output connector, keep digital and analog return currents separated, and verify the recommended output coupling network.
推薦
Professional Headphone Amplifier
The AK4424AET can provide the digital-to-analog conversion stage ahead of a professional headphone amplifier. Its 24-bit resolution supports high-resolution sources, while the 2 Vrms output buffer provides a convenient high-level drive into the amplifier's gain stage. The fixed buffer output should not be loaded beyond manufacturer guidance, so add suitable protection and route the output according to the reference circuit.
推薦
Studio Monitor Controller
The AK4424AET is appropriate for a studio monitor controller that accepts digital audio and drives a line-level amplifier input. Its maximum 192 kHz sampling rate supports high-resolution studio sources, and the integrated 2 Vrms buffer reduces analog board complexity. Use clean analog grounding, place local bypass capacitance at the supply pins, and confirm output clipping behavior against the intended gain structure.
推薦
Digital Mixing Console
The AK4424AET can serve as a converter output device in a digital mixing console when the system requires 24-bit stereo conversion with a 2 Vrms line-level result. The integrated buffer simplifies output routing compared with a discrete stage and avoids adding another external amplifier to each channel. Console designs should implement the manufacturer's clocking scheme and keep high-current digital signals away from the analog output return path.
推薦
Home Theater Audio Processor
The AK4424AET is suited to an audio processor that converts digital surround or stereo program audio into an analog line-level signal. A 2 Vrms ground-referenced output offers useful headroom before the receiver's input stage, while the integrated buffer reduces the component count. Because the part is obsolete, use it primarily in repair or redesign-in-place work where the existing PCB, clock tree, and interface remain unchanged.
推薦
Premium CD Player
The AK4424AET is a natural choice for a premium CD player because it accepts high-resolution digital audio and integrates the line-output buffer. The 24-bit conversion and 192 kHz capability provide a generous specification margin, while the 2 Vrms output simplifies the connection to a line amplifier. Reproduction of the manufacturer grounding and decoupling layout is important for preserving the converter's full dynamic performance.
推薦
推薦產品摘要
工程參考資料,適用於 AK4424AET — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AK4424ET |
|---|---|---|
| Brand | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM |
| Package | 16-pin LQFP | 16-pin LQFP |
| Product Type | Stereo delta-sigma DAC | Stereo delta-sigma DAC |
| Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Supply Voltage | 5 V | 5 V |
| Output Level | 2 Vrms | 2 Vrms |
| Output Buffer | Integrated with charge-pump negative rail | Integrated with charge-pump negative rail |
主要差異化特點
- Integrated ground-referenced 2 Vrms output (對比Discrete-buffer stereo DAC designs)
- High-resolution audio capability in one converter (對比Lower-resolution legacy stereo DACs)
- Direct line-level output stage (對比External output-amplifier designs)
設計說明
Reproduce the manufacturer reference layout with short analog traces and a continuous ground plane. Place bypass capacitors immediately at the converter's analog and digital supply pins, keep the charge-pump and output-buffer region free of digital return current, and route clock signals away from the 2 Vrms output. The layout must also follow the datasheet's guidance for any exposed thermal or electrical pad connection.
Clock quality directly affects converter performance, so keep the master clock and audio-data traces short, use controlled-impedance routing where appropriate, and provide return paths beneath clock signals. Confirm input levels, data validity, and interface timing against the digital audio specification. Avoid routing the clock next to the analog output because coupling can create jitter and reduce effective dynamic performance.
Do not assume that any similarly packaged stereo DAC is a direct substitution. Verify the pin map, supported digital format, master-clock ratio, output-buffer loading, supply sequencing, and analog output topology. The AK4424ET is the closest identified family alternative, but suffix-specific grade and lifecycle conditions must be confirmed before using it in a repair or redesign.
The converter operates from a 5 V rail and contains a charge pump for its negative output-buffer rail. Decouple the analog and digital supplies independently at the device pins and keep switching-current loops compact. Confirm the permitted supply range and power-up behavior in the manufacturer datasheet before adding external bias or negative-rail circuitry, since the converter creates the required internal rail itself.
合規資訊
The manufacturer datasheet and product listings do not provide explicit compliance declarations for this part. AEC-Q100 qualification is not indicated for this commercial audio converter.