AKM

AK4424AET - 24-Bit Stereo DAC with 2Vrms Output | AKM

料号: AK4424AET ✗ 停产
5 V Vdss 16-pin LQFP, tape-and-reel shipping format Package
最小起订量: 1 |

AK4424AET 概述

The Asahi Kasei Microdevices/AKM AK4424AET is a 24-bit stereo delta-sigma DAC operating from a 5 V supply and supporting sampling rates up to 192 kHz. It includes an integrated output buffer that delivers a ground-referenced 2 Vrms signal, eliminating the external output amplifier normally required by high-linearity audio converters. The device is packaged for surface-mount assembly and is supplied in tape-and-reel packaging.

A delta-sigma DAC is a voltage-output data converter that uses oversampling, noise shaping, and digital filtering to convert multi-bit PCM audio samples into a continuous analog waveform. The AK4424 belongs to the broader ADC/DAC hierarchy, combining a digital-to-analog converter, low-noise output driver, clock interface, and analog supply circuitry in one integrated circuit. Its integrated buffer simplifies analog output design while reducing board area compared with discrete buffer stages.

The AK4424 uses AKM's multi-bit modulator architecture to improve linearity and THD+N performance across the audio band. A charge pump associated with the output buffer creates an internal negative supply rail, allowing the output stage to swing below ground and produce a true 2 Vrms output. This ground-referenced capability supports balanced and unbalanced audio paths without requiring a separate negative analog supply at the converter output.

The converter accepts 24-bit digital audio data while operating from a 5 V supply. Its 192 kHz capability suits high-resolution music servers, studio monitors, broadcast equipment, and digital audio consoles. The integrated 2 Vrms output buffer is particularly useful when the DAC drives downstream analog stages directly, reducing component count and simplifying the analog output topology.

Typical uses include premium CD and network audio players, professional headphone amplifiers, studio monitor controller boards, digital mixing consoles, and home theater audio processors. The 2 Vrms output is also appropriate for line-level inputs in consumer and industrial audio systems where dynamic headroom is required. Clocking and interface implementation should follow the manufacturer application guidance to maintain data validity and minimize jitter-related performance loss.

For a new design, verify that the selected board layout reproduces the recommended grounding, decoupling, and output-stage topology. Decoupling capacitance and placement are important because a high-performance audio DAC can be limited by supply impedance or trace inductance even when its intrinsic converter performance is strong. Confirm the complete pin assignment and exposed-pad treatment in the manufacturer datasheet before routing the PCB.

This page consolidates the converter's published architecture and packaging information with design guidance, application fit, and procurement paths. It also identifies where detailed electrical limits, clock tables, and absolute maximum ratings must be checked in the original manufacturer documentation before a production release.

直接替换替代料: AK4424AET ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AK4424AET (相同外形与封装尺寸) ——差异在于 Maximum Sampling Rate, Modulator Architecture.

AKM (Asahi Kasei Microdevices)
Maximum Sampling Rate: 192kHz
Modulator Architecture: Multi-bit delta-sigma
对比 AK4424AET →

AK4424ET

✅ 直接替换 ⚠️ 规格未核验
AKM (Asahi Kasei Microdevices)
📦 16-pin LQFP
Stereo digital-to-analog converter · 24 bit · 192kHz · 2 channels, stereo · 5 V · 2Vrms · Integrated · Ground referenced

联系询价

查看数据手册 →

AK4424AET 最大额定值与电气特性

Product Type 24-bit stereo delta-sigma DAC
电源电压 5 V
分辨率 24 bit
Maximum Sampling Rate 192 kHz
输出配置 Stereo, 2 Vrms
Output Buffer Integrated
Output Reference Ground referenced
Internal Negative Rail Charge-pump generated
Modulator Architecture Multi-bit modulator
封装 16-pin LQFP, tape-and-reel shipping format
安装类型 Surface Mount

AK4424AET 16-pin lqfp, tape-and-reel shipping format 引脚配置指南

AK4424AET(16-pin lqfp, tape-and-reel shipping format 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AK4424AET 的 16-pin lqfp, tape-and-reel shipping format 封装引脚图

暂无详细引脚数据: AK4424AET.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AK4424AET 适用于 6 应用s: High-End Network Audio Player, Professional Headphone Amplifier, Studio Monitor Controller, Digital Mixing Console, Home Theater Audio Processor, Premium CD Player.

🌐

High-End Network Audio Player

The AK4424AET fits a network audio player because it converts 24-bit PCM streams at rates up to 192 kHz and directly produces a 2 Vrms stereo analog output. Its integrated buffer removes the usual discrete line-output stage and preserves ground-referenced signal swing through the charge-pump-assisted output buffer. Place the DAC close to the analog output connector, keep digital and analog return currents separated, and verify the recommended output coupling network.

🎧

Professional Headphone Amplifier

The AK4424AET can provide the digital-to-analog conversion stage ahead of a professional headphone amplifier. Its 24-bit resolution supports high-resolution sources, while the 2 Vrms output buffer provides a convenient high-level drive into the amplifier's gain stage. The fixed buffer output should not be loaded beyond manufacturer guidance, so add suitable protection and route the output according to the reference circuit.

🎵

Studio Monitor Controller

The AK4424AET is appropriate for a studio monitor controller that accepts digital audio and drives a line-level amplifier input. Its maximum 192 kHz sampling rate supports high-resolution studio sources, and the integrated 2 Vrms buffer reduces analog board complexity. Use clean analog grounding, place local bypass capacitance at the supply pins, and confirm output clipping behavior against the intended gain structure.

🏭

Digital Mixing Console

The AK4424AET can serve as a converter output device in a digital mixing console when the system requires 24-bit stereo conversion with a 2 Vrms line-level result. The integrated buffer simplifies output routing compared with a discrete stage and avoids adding another external amplifier to each channel. Console designs should implement the manufacturer's clocking scheme and keep high-current digital signals away from the analog output return path.

📺

Home Theater Audio Processor

The AK4424AET is suited to an audio processor that converts digital surround or stereo program audio into an analog line-level signal. A 2 Vrms ground-referenced output offers useful headroom before the receiver's input stage, while the integrated buffer reduces the component count. Because the part is obsolete, use it primarily in repair or redesign-in-place work where the existing PCB, clock tree, and interface remain unchanged.

💿

Premium CD Player

The AK4424AET is a natural choice for a premium CD player because it accepts high-resolution digital audio and integrates the line-output buffer. The 24-bit conversion and 192 kHz capability provide a generous specification margin, while the 2 Vrms output simplifies the connection to a line amplifier. Reproduction of the manufacturer grounding and decoupling layout is important for preserving the converter's full dynamic performance.

What is the AK4424AET?
The AK4424AET is a 24-bit stereo delta-sigma DAC from Asahi Kasei Microdevices/AKM with a maximum sampling rate of 192 kHz and an integrated 2 Vrms output buffer. According to the manufacturer datasheet, the buffer includes a charge pump that develops an internal negative supply rail, enabling a ground-referenced analog output. The device operates from a 5 V supply and is intended for high-resolution professional and premium consumer audio systems.
What are the key specifications of AK4424AET that engineers should know?
The AK4424AET combines 24-bit resolution, a 192 kHz maximum sampling rate, a 5 V supply, and a 2 Vrms stereo output in one integrated circuit. Its integrated output buffer avoids a separate discrete output stage, while the internal negative rail allows the analog waveform to swing below ground. The manufacturer datasheet also identifies a multi-bit modulator architecture intended to improve linearity and THD+N performance.
Can AK4424AET drive a line-level audio output directly?
Yes, the AK4424AET is designed to drive line-level analog outputs directly because it incorporates a 2 Vrms output buffer. The integrated buffer reduces the external component count and simplifies the output path in audio preamplifiers, network streamers, studio equipment, and digital consoles. Follow the manufacturer output-load and stability guidance in the datasheet when selecting the downstream coupling, gain, and protection networks.
Where can I download the AK4424AET datasheet PDF?
The AK4424AET manufacturer datasheet can be downloaded from the AKM PDF hosted in the product links for this page. It covers the converter architecture, 2 Vrms output buffer, recommended application circuit, digital interface, and electrical characteristics. Use the document-numbered revision linked by the manufacturer where possible, and check the revision history before applying a circuit to a new production design.
Where can I find the AK4424AET pinout?
The AK4424AET pin assignment is documented in the pin-description table of the manufacturer datasheet. The 16-pin surface-mount package includes analog, digital, clock, and configuration connections that must be routed according to the recommended layout. Because the exact signal names are not reproduced on this page, consult the package drawing and pin table before assigning PCB tracks or establishing the exposed-pad connection.
What is the difference between AK4424AET and AK4424ET?
AK4424AET and AK4424ET are closely related 24-bit stereo DAC variants from the same AKM family, but suffix changes can indicate different grade, marking, or order-code conditions. Both are identified as 5 V devices with 192 kHz capability and integrated 2 Vrms outputs in the product listings. Confirm the temperature grade, lifecycle status, and exact order-code definition in the manufacturer datasheet before treating one as a substitution for the other.
What can replace the obsolete AK4424AET?
The closest identified same-family option is the AK4424ET, but it should be treated as a conditional replacement rather than an automatic drop-in. The cross-reference search did not identify a distinct cross-manufacturer part that is both pin-compatible and parametrically equivalent. Before substituting any device, compare the pin map, digital audio format, master-clock requirements, output-buffer topology, supply rails, and lifecycle status in the manufacturer documentation.
Is AK4424AET suitable for a studio monitor controller?
The AK4424AET is suitable for studio monitor control when the downstream amplifier accepts a 2 Vrms stereo signal. Its 24-bit conversion, 192 kHz maximum rate, and integrated ground-referenced buffer simplify the converter section of a monitor controller. The design should still include appropriate input filtering, gain staging, protection, and output muting, while the PCB must follow the manufacturer reference layout for stable analog performance.
How does AK4424AET compare with a typical external-buffer DAC design?
The AK4424AET integrates the 2 Vrms output buffer into the DAC package, while a discrete-buffer design requires an additional amplifier, its power rails, decoupling, and associated routing. Integration reduces component count and board area and keeps the analog output stage close to the converter. The trade-off is that the fixed internal buffer architecture may not match the exact gain, drive capability, or output topology required by every downstream amplifier.
When should I choose AK4424AET instead of a switching audio DAC?
Choose the AK4424AET when low-noise analog output and direct 2 Vrms line-level drive matter more than board area and power efficiency. A linear-output DAC with an integrated buffer generally avoids the switching ripple and radiated-noise concerns of a switched-capacitor or switched-output implementation. It remains a legacy choice for new designs, so confirm lifecycle risk and consider a currently supported converter when the product program permits.
Is AK4424AET still active for new designs?
The AK4424AET is identified as obsolete in current lifecycle listings, so new production designs should not assume ongoing supply. Existing equipment can often be maintained by sourcing original or recovered inventory, but long-term availability may be limited. For a new design, evaluate a currently supported stereo DAC with equivalent resolution, sampling rate, output level, interface, and package requirements.
Where can I buy the AK4424AET online?
Use the Request a Quote form on this page to ask for AK4424AET availability, current lead time, and minimum order quantity. Because the device is listed as obsolete, quotation response and allocation can vary with remaining original inventory. Confirm that any offered part carries the correct order code and condition before approving it for production or repair use.
What is the price of AK4424AET?
Current commercial pricing for the AK4424AET should be obtained through the Request a Quote form on this page. Because the converter is a legacy part with fragmented inventory, unit pricing can vary substantially with quantity, date code, traceable condition, and seller inventory. Submit the required quantity and sourcing conditions with the request so the quotation reflects the actual production need.
What is the lead time for AK4424AET?
The current lead time for AK4424AET depends on remaining original inventory and the supplier's allocation policy because the device is listed as obsolete. Request a firm lead time through the Request a Quote form on this page. For maintenance or repair schedules, include the required quantity, acceptable date-code range, and traceability requirements when requesting the quotation.
Is AK4424AET in stock?
AK4424AET inventory is fragmented across multiple channels, and the manufacturer product status is obsolete, so a permanent stock guarantee cannot be assumed. Submit a stock request through the Request a Quote form on this page with your required quantity and target date. The manufacturer datasheet remains the authoritative source for electrical performance and package details.

工程参考数据: AK4424AET ——对比、设计指导和合规信息。

选型指南

Choose the AK4424AET when maintaining an existing design that depends on its 24-bit, 192 kHz stereo conversion, 5 V operation, 2 Vrms integrated output, and established board layout. Its charge-pump-assisted buffer allows ground-referenced analog output and reduces the need for a discrete line-output stage. Select AK4424ET only after confirming suffix-specific grading, order-code requirements, and lifecycle status. For a new high-volume product, a currently supported stereo DAC is usually more appropriate because this device is obsolete and future allocation is uncertain. A device such as the CS4461-CZZ may suit modern designs requiring a similarly integrated stereo DAC function, but it is not presented as a pin-compatible substitution. Use the manufacturer datasheet as the deciding reference for clocking, digital format, output loading, and PCB implementation.

与替代料对比

参数 本产品 AK4424ET
Brand Asahi Kasei Microdevices/AKM Asahi Kasei Microdevices/AKM
Package 16-pin LQFP 16-pin LQFP
Product Type Stereo delta-sigma DAC Stereo delta-sigma DAC
Resolution 24 bit 24 bit
Maximum Sampling Rate 192 kHz 192 kHz
Supply Voltage 5 V 5 V
Output Level 2 Vrms 2 Vrms
Output Buffer Integrated with charge-pump negative rail Integrated with charge-pump negative rail

关键差异点

  • Integrated ground-referenced 2 Vrms output (对比 Discrete-buffer stereo DAC designs)
  • High-resolution audio capability in one converter (对比 Lower-resolution legacy stereo DACs)
  • Direct line-level output stage (对比 External output-amplifier designs)

设计说明

Reproduce the manufacturer reference layout with short analog traces and a continuous ground plane. Place bypass capacitors immediately at the converter's analog and digital supply pins, keep the charge-pump and output-buffer region free of digital return current, and route clock signals away from the 2 Vrms output. The layout must also follow the datasheet's guidance for any exposed thermal or electrical pad connection.

Clock quality directly affects converter performance, so keep the master clock and audio-data traces short, use controlled-impedance routing where appropriate, and provide return paths beneath clock signals. Confirm input levels, data validity, and interface timing against the digital audio specification. Avoid routing the clock next to the analog output because coupling can create jitter and reduce effective dynamic performance.

Do not assume that any similarly packaged stereo DAC is a direct substitution. Verify the pin map, supported digital format, master-clock ratio, output-buffer loading, supply sequencing, and analog output topology. The AK4424ET is the closest identified family alternative, but suffix-specific grade and lifecycle conditions must be confirmed before using it in a repair or redesign.

The converter operates from a 5 V rail and contains a charge pump for its negative output-buffer rail. Decouple the analog and digital supplies independently at the device pins and keep switching-current loops compact. Confirm the permitted supply range and power-up behavior in the manufacturer datasheet before adding external bias or negative-rail circuitry, since the converter creates the required internal rail itself.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer datasheet and product listings do not provide explicit compliance declarations for this part. AEC-Q100 qualification is not indicated for this commercial audio converter.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AK4424AET datasheet AK4424AET pinout AK4424AET datasheet pdf AK4424AET equivalent AK4424AET replacement AK4424AET vs AK4424ET AK4424 2Vrms stereo DAC AK4424AET LQFP-16 AK4424AET audio converter AK4424AET price AK4424AET stock AKM AK4424AET

相关元器件 & 术语

Asahi Kasei Microdevices/AKM AK4424AET AK4424ET delta-sigma DAC digital-to-analog converter stereo DAC audio converter 24-bit resolution 192 kHz sampling rate 2 Vrms output integrated output buffer charge pump negative supply rail multi-bit modulator ground-referenced output THD+N dynamic range 16-pin LQFP surface mount tape and reel high-resolution audio studio monitor controller headphone amplifier network audio player digital mixing console
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情