ATF16V8BQL-15PU - 250-Gate Low-Power PLD | Microchip
MPN: ATF16V8BQL-15PU ✓ 啟用中ATF16V8BQL-15PU 概覽
An erasable programmable logic device, or PLD, is a semiconductor whose logic configuration is stored in nonvolatile memory. A CPLD belongs to the programmable-logic hierarchy, which includes PLDs, complex programmable logic devices, FPGA and CPLD families, and broader digital-logic semiconductors. Unlike a mask-programmed device, an ATF16V8BQL retains its programmed configuration after power is removed and can be reprogrammed during development or field updates.
The ATF16V8BQL architecture provides eight macrocells, each with eight product terms and configurable output operation. It supports up to 16 inputs, 8 I/Os, and three configurable operating modes. Input Transition Detection circuitry automatically places the device into a low-power state when inputs are idle, while typical standby current is listed as 5 mA.
The electrical-erasable Flash-memory implementation combines nonvolatile configuration storage with a 15 ns propagation-delay grade. The architecture is a superset of generic 16R8 arrangements and can directly replace many 20-pin combinatorial PLDs. This makes it useful for consolidating small amounts of glue logic without introducing the routing flexibility and complexity of an FPGA.
Typical uses include address decoding, bus-interface glue logic, industrial control, power-sequencing logic, peripheral interfacing, and legacy equipment upgrades. The low-power behavior is especially useful in systems that spend substantial time waiting for inputs, while the 5 V supply and 15 ns timing support conventional 5 V digital designs.
PCB design should preserve the 20-pin PDIP footprint, route all supply pins consistently, and keep programming and control traces away from sensitive analog sections. Confirm the device's programmed state and timing assumptions before substitution because device identifiers, speed grades, package suffixes, and architectural differences can change compatibility between otherwise similar PLDs.
This page combines the manufacturer's architecture and power characteristics with pin-compatible alternatives, application guidance, parameter comparisons, and practical design considerations for engineers planning a programmed-logic design or an in-circuit replacement.
直接替換替代品,適用於 ATF16V8BQL-15PU — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATF16V8BQL-15PU (相同外形與佔位) — 差異在於 Device Type, Package, Propagation Delay, Architecture, Maximum Inputs.
ATF16V8B-15PU
✅ 直接替換聯絡詢價
查看資料表 →ATF16V8BQL-15JU
✅ 直接替換聯絡詢價
查看資料表 →ATF16V8BQL-15PL
✅ 直接替換📋 參考替代品(不在目錄中)
ATF16V8CZ-15PI
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATF16V8C-7PU
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATF16V8BQL-15PU 最大額定值與電氣特性
| Device Type | Electrically erasable programmable logic device |
| Architecture | Quarter and low-power CPLD |
| Gate Count | 250 gates |
| Macrocells | 8 macrocells |
| Maximum Inputs | Up to 16 inputs |
| I/O Count | 8 I/Os |
| Product Terms per Output | 8 product terms |
| 供應電壓 | 5 V |
| Propagation Delay | 15 ns maximum |
| Maximum Operating Frequency | 62 MHz |
| Standby Current | 5 mA typical |
| Configuration Technology | Electrically erasable Flash memory |
| Low-Power Control | Automatic shutdown through Input Transition Detection circuitry |
| 封裝 | 20-pin PDIP |
| 安裝類型 | Through-hole |
ATF16V8BQL-15PU 20-pin pdip 腳位配置指南
ATF16V8BQL-15PU(20-pin pdip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATF16V8BQL-15PU.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATF16V8BQL-15PU 適用於 6 應用s: Industrial Control and Interlock Logic, Power-Sequencing Controller, Legacy Interface and Bus Decoding, Peripheral Interlock Logic, Instrumentation and Measurement Control, Embedded Product Logic Consolidation.
Industrial Control and Interlock Logic
The ATF16V8BQL-15PU suits compact control panels where several Boolean conditions must be combined into actuator or interlock decisions. Its 8 macrocells and eight product terms per output provide enough capacity for typical industrial gate-logic consolidation, while the 15 ns speed grade handles register and peripheral-interface timing without an FPGA. The QL Input Transition Detection function can reduce activity while the controller waits for new commands, making the device appropriate for equipment that remains powered but idle much of the time.
推薦
Power-Sequencing Controller
ATF16V8BQL-15PU can implement deterministic sequencing for multiple supply-enable or reset signals in a 5 V control domain. Eight configurable macrocells allow enable conditions, timing interlocks, and fault outputs to be consolidated in one programmed device. The 15 ns propagation-delay grade supports predictable logic paths, while automatic low-power entry is valuable when the sequencer is waiting for a start command. External timing components should set any required dwell intervals, and every power rail should retain its own release and fault protection.
推薦
Legacy Interface and Bus Decoding
The ATF16V8BQL-15PU is useful for decoding address, chip-select, interrupt, or peripheral-control signals in legacy equipment that cannot justify a programmable FPGA. Its support for up to 16 inputs and 8 configurable I/Os matches the scale of many 20-pin combinatorial logic designs. The electrically erasable Flash configuration permits design corrections without changing a custom mask, and the 15 ns timing grade provides faster propagation than the commonly compared 25 ns GAL16V8B class. Existing programmed files still require device-family and pinout verification.
推薦
Peripheral Interlock Logic
The ATF16V8BQL-15PU can combine several peripheral status inputs into interlock, ready, busy, and error outputs for legacy embedded systems. Its 8 macrocells support product-term logic that would otherwise require multiple discrete gates, while the QL low-power behavior reduces unnecessary switching during idle intervals. The 5 V operating supply aligns with many older processor and peripheral platforms. Designers should include reset, unused-pin, and pull-state requirements in the programmed configuration and validate timing against the slowest participating peripheral.
推薦
Instrumentation and Measurement Control
ATF16V8BQL-15PU is appropriate for instrument front ends that require deterministic command decoding, range selection, status aggregation, or safety interlocks. The 15 ns propagation-delay class provides useful timing margin in measurement-control paths, and the nonvolatile Flash configuration simplifies field updates when instrument behavior changes. Automatic low-power entry helps reduce consumption between measurements, but analog and high-energy actuator circuitry should remain outside this programmable logic device. Isolation, grounding, and protection must be designed according to the complete instrument safety architecture.
推薦
Embedded Product Logic Consolidation
The ATF16V8BQL-15PU can consolidate small blocks of embedded glue logic into a single programmable device, reducing component count in cost-sensitive 5 V products. Typical functions include mode decoding, alarm combination, watchdog qualification, and peripheral-chip enables. Its eight macrocells and up to 16 inputs suit compact logic networks, while Flash-based configuration supports design iteration and field updates. The low-power transition-detection feature can reduce dynamic consumption in products with sporadic operator activity, although long power-down periods should be handled by system-level power gating when lower standby current is required.
推薦
推薦產品摘要
工程參考資料,適用於 ATF16V8BQL-15PU — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATF16V8B-15PU | ATF16V8BQL-15JU | ATF16V8BQL-15PL | ATF16V8CZ-15PI | ATF16V8C-7PU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP |
| Propagation Delay | 15 ns maximum | 15 ns maximum | 15 ns maximum | 15 ns maximum | 15 ns | 7 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
主要差異化特點
- Automatic low-power shutdown differentiates the QL device from the standard-power version (對比ATF16V8B-15PU)
- The target preserves the established 8-macrocell QL architecture (對比ATF16V8C-7PU)
- A same-footprint QL option is available for programmed-logic consolidation (對比ATF16V8CZ-15PI)
設計說明
Budget the ATF16V8BQL-15PU around its 5 V supply and typical 5 mA standby current, while separately checking active current and transition current in the manufacturer characterization tables. The Input Transition Detection function can reduce activity during idle periods, but system power calculations should include external pull networks, programming-interface loads, and any upstream regulator tolerance. Do not treat low-power mode as a substitute for removing the device from the supply when a complete power-off state is required.
Use the manufacturer's 20-pin PDIP pin-assignment and package-outline drawings to establish every PCB pad and the orientation of pin 1. The ATF16V8B and ATF16V8BQL architecture can replace many 20-pin combinatorial PLDs, but an identical pin count does not by itself prove that programming pins, control pins, and I/O directions match. Verify the complete pin-description table and the programmed JEDEC file before approving a replacement layout.
Do not interchange the ATF16V8B and ATF16V8BQL members solely because both use 8 macrocells and a 15 ns grade. The standard ATF16V8B-15PU does not provide the QL version's automatic Input Transition Detection power-down behavior, which can change system power measurements and wake timing. Also verify the ordering suffix for package, temperature grade, and programming support; a same-named device with a different suffix may require a different socket, footprint, or device-programmer configuration.
Programmed-logic outputs should be treated as digital timing paths rather than general-purpose analog buffers. For slow or noisy board-level signals, use the manufacturer's input and output timing information to establish setup and hold requirements, and keep clock-like paths short. If an output drives a long cable, relay, or high-capacitance node, account for loading, transition time, and possible ground bounce; the ATF16V8BQL's low-power mode does not improve the electrical integrity of an inadequately terminated interconnect.
合規資訊
A RoHS3 statement appears for ATF16V8BQL-15XU in a cross-reference result, but it was not applied to ATF16V8BQL-15PU. Confirm target-MPN environmental and material declarations with Microchip Technology before production release.