onsemi

SN74LS240H - 8-Channel 3-State Inverting Driver | onsemi

MPN: SN74LS240H ✗ 停產
4.75 V to 5.25 V Vdss 20-pin PDIP Package
MOQ: 1 |

SN74LS240H 概覽

onsemi SN74LS240H is an eight-channel bipolar octal buffer and line driver with inverting, three-state outputs, designed for operation from a 4.75 V to 5.25 V supply. The device is offered in a 20-pin PDIP package and provides eight independently controlled outputs for driving buses, memory interfaces, and other digital systems.

An octal buffer or line driver is a digital logic IC that strengthens a signal so it can reliably drive multiple bus loads. The SN74LS240 family combines buffer operation with active-low output enable control, allowing each output to be placed into a high-impedance state when the associated output is not selected. This tri-state capability supports shared buses, bidirectional bus-interface arrangements, and designs that require controlled connection and isolation of multiple logic nodes.

The key functional characteristics are eight inverting channels, a 4.75 V to 5.25 V supply range, three-state outputs, and a 20-pin PDIP package. The three-state outputs are particularly useful in bus-oriented equipment because disabled drivers do not actively contend with another logic source. The H designation identifies a distinct onsemi catalog configuration within the SN74LS240 family, so engineers should confirm ordering details, temperature range, and qualification requirements before release.

The bipolar SN74LS240 architecture belongs to the Low-Power Schottky TTL logic family. Its buffered outputs are intended to improve signal integrity and drive capability when connecting processors, memory devices, peripheral controllers, and bus transceivers. Because the outputs invert, a low input produces a high output and a high input produces a low output when the output driver is enabled. Output-enable polarity must therefore be considered together with data inversion during system-level logic design.

Typical applications include memory address driving, clock and control-line distribution, instrument-bus interfacing, industrial control systems, and legacy computer peripherals. In a shared-bus arrangement, the output-enable signal determines which driver section may actively connect to the bus while the other sections remain in the high-impedance state. In address-driver arrangements, the inverting channels can be assigned according to the required polarity of each memory-control signal.

PCB implementation requires correct DIP pin orientation and adequate routing space around the 20-pin package. Power and ground pins should be connected with short traces and suitable bypass capacitance to limit transient current through package leads. Because outputs can source or sink bus current, external load capacitance, trace length, and simultaneous switching should be checked against the applicable device limits before using the part in high-speed or heavily loaded systems.

This page consolidates the device function, verified catalog information, replacement considerations, and practical implementation guidance. It also distinguishes a genuine pin-compatible replacement from a merely similar logic function and emphasizes that system timing, output-enable polarity, package construction, temperature grade, and qualification requirements must be reviewed together before substitution.

直接替換替代品,適用於 SN74LS240H — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: SN74LS240H (相同外形與佔位) — 差異在於 Bits per Element, Logic Type, Number of Elements, Output State.

Texas Instruments
Bits per Element: 4 bits per element
Logic Type: Inverting buffer and line driver
Number of Elements: 2 elements per device
比較對象 SN74LS240H →

SN74LS240J

✅ 直接替換
📦 20-pin PDIP
Same eight-channel inverting 3-state function and 20-pin PDIP footprint; suffix-dependent temperature or qualification differences require ordering-table review.

📋 參考替代品(不在目錄中)

SN74LS240N

✅ 直接替換
Texas Instruments
📦 20-pin PDIP
8 channels · 2 elements per device · 4 bits per element · Inverting buffer and line driver · Three-state output · 4.75 V to 5.25 V · 2 inputs · 20-pin PDIP

聯絡詢價

查看資料表 →

SN74LS240N

✅ 直接替換
Texas Instruments
📦 20-pin PDIP
8 channels · 2 elements per device · 4 bits per element · Inverting buffer and line driver · Three-state output · 4.75 V to 5.25 V · 2 inputs · 20-pin PDIP

聯絡詢價

查看資料表 →

SN74LS240J

✅ 直接替換
📦 20-pin PDIP
Same eight-channel inverting 3-state 74LS240 function and 20-pin PDIP footprint; temperature grade and qualification can differ by suffix.

📋 參考替代品(不在目錄中)

DM74LS240N

✅ 直接替換
📦 20-pin PDIP
Same 74LS240 octal inverting 3-state function and 20-pin PDIP footprint; propagation timing and qualification must be compared for the selected implementation.

📋 參考替代品(不在目錄中)

MC74LS240N

✅ 直接替換
📦 20-pin PDIP
Same 74LS240 octal inverting 3-state function and 20-pin PDIP footprint; lifecycle, timing, and manufacturing status must be confirmed before use.

📋 參考替代品(不在目錄中)

SN74LS240H 最大額定值與電氣特性

Number of Channels 8 channels
Supply Voltage Range 4.75 V to 5.25 V
Logic Type Bipolar inverter
Output Function Inverting
Output State 3-state
Number of Elements 2 elements
Bits per Element 4 bits
Package Type 20-pin PDIP
Total Pin Count 20 pins
安裝類型 Through-hole

SN74LS240H 20-pin pdip 腳位配置指南

SN74LS240H(20-pin pdip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

SN74LS240H 的 20-pin pdip 封裝腳位圖

無詳細腳位定義資料: SN74LS240H.

請參閱 資料表 以查看完整腳位配置。

典型應用

SN74LS240H 適用於 6 應用s: Memory Address Driving, Shared Digital Bus Interface, Clock and Control Distribution, Industrial Control Systems, Test and Measurement Equipment, Legacy Peripheral Interfacing.

🖥️

Memory Address Driving

The SN74LS240H is suited to driving memory-address and control lines in systems built around 5 V bipolar logic. Its eight inverting channels provide buffered drive capability, while the grouped output-enable structure can place selected sections into a high-impedance state when those outputs must be disconnected from a shared bus. The 20-pin PDIP package also makes the device straightforward to replace on through-hole legacy boards. Before finalizing the layout, compare address polarity, enable requirements, timing margins, fanout, and trace capacitance against the specific system timing budget. Confirm propagation-delay and output-current limits in the onsemi datasheet because the line-driver function alone does not establish compatibility with every memory timing specification.

🌐

Shared Digital Bus Interface

The SN74LS240H can interface a logic subsystem to a shared digital bus when correctly enabled. Its three-state outputs allow disabled drivers to become high-impedance, preventing active contention with another device that owns the bus. The eight inverting channels make it useful for conventional 74LS-style control and data routing, while the 4.75 V to 5.25 V supply range targets nominal 5 V systems. Designers must define every driver-enable state so that no two outputs fight on the same node. PCB trace length, capacitive loading, pull-up or pull-down requirements, and simultaneous switching also require evaluation before the part is approved for a particular bus topology.

⚡

Clock and Control Distribution

The SN74LS240H can distribute clock, reset, or control signals when the receiving system requires greater drive strength and controlled disconnect capability. Because the device inverts its inputs, the source signal must be arranged so the receiver sees the intended active or inactive level. Its eight channels can be assigned individually within the device's enable groups, allowing unused outputs to remain isolated. In a clock-distribution design, pay particular attention to edge-rate distortion, unequal trace lengths, capacitive loading, and ground bounce. The onsemi timing table should be used to establish setup and hold margins rather than relying on nominal logic-family behavior alone.

🏭

Industrial Control Systems

The SN74LS240H can be used in older industrial-control equipment where 5 V TTL-style signals must drive external logic, relay-interface logic, or a remote bus. The eight inverting three-state channels provide a practical way to strengthen control signals while allowing selected outputs to be disconnected during reset or test modes. Its 20-pin PDIP package is useful for repair and obsolescence-management programs involving through-hole control boards. The design must verify operating-temperature requirements, output current, noise margins, and isolation between connected bus nodes. The device should not be assumed to meet modern industrial qualification requirements without checking the applicable temperature-grade and compliance documentation.

🔧

Test and Measurement Equipment

The SN74LS240H is applicable in legacy test and measurement instruments that need to route control signals to front panels, backplanes, or externally accessed logic connectors. Three-state outputs can isolate a group of drivers when an instrument is not actively controlling a line, and the inverting channels can simplify logic inversion in older bench equipment. The through-hole package supports board-level repair and retrofit programs. Designers should assess connector settling time, cable capacitance, ground-return integrity, and possible ground-loop problems. Verify the exact timing and output-drive specifications before using the part with high-speed sampling or precision analog-control circuitry, where additional buffering may be preferable.

📺

Legacy Peripheral Interfacing

The SN74LS240H is well suited to maintaining or repairing legacy peripheral boards that use bipolar 74LS-family inverting drivers. It can connect processor-side signals to printer, storage, display, or expansion-interface logic while retaining the three-state behavior needed by shared bus arrangements. The 20-pin PDIP format supports direct board replacement where pin, function, and electrical requirements match. Replacement work should include a detailed comparison of output-enable polarity, signal inversion, propagation delay, supply current, and temperature range. Review the manufacturer ordering information and markings so that an apparently identical 74LS240 suffix does not introduce an unintended grade or package-material difference.

What is the SN74LS240H?
The SN74LS240H is an eight-channel bipolar octal buffer and line driver with inverting, three-state outputs. According to the onsemi datasheet, it operates from 4.75 V to 5.25 V and is used for memory-address driving, clock driving, and bus-oriented transmission. The H catalog configuration is supplied in a 20-pin PDIP package for through-hole PCB assembly.
What is the operating voltage of the SN74LS240H?
The SN74LS240H operates from a nominal 5 V supply within a 4.75 V to 5.25 V range. The onsemi product information identifies the SN74LS240 as a bipolar inverter family for 5 V systems. This voltage range provides the supply margin required for standard Low-Power Schottky TTL-compatible interface designs.
Does the SN74LS240H have 3-state outputs?
Yes, the SN74LS240H provides three-state outputs on all eight channels. The onsemi datasheet describes the family as an octal buffer and line driver with three-state outputs. When an output is disabled, it enters a high-impedance state so that it does not actively contend with another driver connected to the same bus.
Where can I download the SN74LS240H datasheet PDF?
The SN74LS240H datasheet PDF can be obtained from the Rochester Electronics part-detail page linked on this page. The onsemi datasheet describes the underlying SN74LS240 family, including its eight inverting channels, 4.75 V to 5.25 V supply range, three-state outputs, and intended uses in memory-address, clock, and bus-driver circuits.
Where is the SN74LS240H pinout located?
The SN74LS240H pinout is documented in the onsemi SN74LS240 datasheet under the pin configuration and pin-description tables. The device uses a 20-pin PDIP package. Use that table when assigning input, output, output-enable, supply, and ground connections, particularly because the eight data paths are grouped into two independently enabled four-channel sections.
Is the SN74LS240H a non-inverting buffer?
No, the SN74LS240H is an inverting octal buffer and line driver. The onsemi datasheet identifies every data output as the logical complement of its corresponding input. Designers must account for this inversion when assigning address, control, or clock signals and when interpreting bus waveforms.
What can replace the SN74LS240H?
A valid replacement must be an octal inverting buffer or line driver with three-state outputs, the same 20-pin PDIP footprint, and compatible 5 V operation. SN74LS240N, SN74LS240J, DM74LS240N, and MC74LS240N are candidate 20-pin implementations, but each should be checked for temperature grade, package construction, qualification, and exact timing requirements before substitution.
What is the best onsemi equivalent for SN74LS240H?
The closest onsemi catalog candidate is SN74LS240N, which implements the same eight-channel, inverting, three-state line-driver function in a 20-pin PDIP package. The manufacturer suffix can represent a different qualification or temperature class, so engineers should compare the ordering table, operating-temperature limits, and package construction before treating it as an exact replacement.
SN74LS240H vs SN74LS240N — which is better for a new design?
SN74LS240N is generally the more practical choice for a new commercial through-hole design because it is the modern catalog listing, while SN74LS240H is associated with a specialized legacy configuration. Both provide eight inverting three-state channels in a 20-pin PDIP footprint. Confirm temperature grade, qualification, marking, availability, and electrical limits in the manufacturer ordering information.
SN74LS240H vs DM74LS240N — are they pin compatible?
DM74LS240N is a candidate pin-compatible replacement because it implements the same 74LS240 octal inverting buffer and line-driver function in a 20-pin PDIP package. Pin compatibility alone does not establish identical behavior for every application; compare propagation timing, output-enable polarity, supply current, temperature grade, and qualification requirements.
When should I choose SN74LS240H over a newer logic alternative?
Choose SN74LS240H when maintaining an existing bipolar 74LS240 design requires the established eight-channel inverting, three-state interface and a 20-pin PDIP footprint. For new designs, compare current catalog members because their lifecycle, qualification, and sourcing conditions may be more suitable. Retain SN74LS240H only when its documented electrical and environmental requirements match the system.
Is SN74LS240H suitable for driving a shared digital bus?
The SN74LS240H is suitable for shared digital-bus applications because its outputs support a high-impedance state. The onsemi datasheet identifies bus-oriented transmitters and drivers as intended uses. Designers must ensure that only one enabled driver connects to a given node at a time and must verify load-current and capacitive-loading limits for the complete board.
How much current can an SN74LS240H output drive?
The output-current rating must be taken from the applicable onsemi datasheet and tested against the actual load. The device is a bipolar 74LS-family line driver, but its source and sink limits depend on voltage level, temperature, package variant, and output state. Refer to the absolute-maximum and recommended-operating-condition tables before sizing fanout or bus loading.
Does the SN74LS240H need bypass capacitors?
Yes, the SN74LS240H should have local supply decoupling to suppress inductive and switching transients on the 5 V rail. Place a suitable ceramic bypass capacitor close to the device supply pin and provide additional bulk capacitance according to the power-supply and board-level requirements. Keep the ground return short and connect it directly to the device ground pin.
What are the key specifications of SN74LS240H that engineers should know?
The essential SN74LS240H specifications are eight inverting channels, three-state outputs, a 4.75 V to 5.25 V supply range, bipolar logic technology, and a 20-pin PDIP package. The onsemi product information also identifies intended uses in memory-address drivers, clock drivers, and bus transmitters. Exact timing, temperature, output-current, and qualification details require the device-specific datasheet and ordering table.

工程參考資料,適用於 SN74LS240H — 比較、設計指引及合規資訊。

選型指南

Select SN74LS240H when maintaining a legacy 5 V system requires an octal inverting line driver with three-state outputs in a 20-pin PDIP footprint. It is particularly appropriate when signal inversion, grouped bus enable, and through-hole repair compatibility are established requirements. For new commercial designs, compare current catalog members such as SN74LS240N and DM74LS240N because lifecycle and sourcing conditions may be more favorable. Do not select a replacement solely from the 74LS240 function name: verify output-enable polarity, channel grouping, propagation delay, output-current capability, operating temperature, qualification, package material, and marking conventions. A valid drop-in replacement must preserve all of those electrical and mechanical requirements. For designs where exact legacy behavior is not required, newer bus devices or smaller logic packages may reduce board area and power consumption, but they would not be drop-in replacements without a PCB redesign.

與替代品比較

參數 本產品 SN74LS240J SN74LS240N DM74LS240N MC74LS240N
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP
Brand onsemi onsemi Texas Instruments onsemi onsemi
Number of Channels 8 channels 8 channels 8 channels 8 channels 8 channels
Logic Technology Bipolar Bipolar Bipolar Bipolar Bipolar
Output Function Inverting Inverting Inverting Inverting Inverting
Output State 3-state 3-state 3-state 3-state 3-state
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole
Special Features Grouped 3-state output enable Grouped 3-state output enable Grouped 3-state output enable Grouped 3-state output enable Grouped 3-state output enable

主要差異化特點

  • Maintains the complete octal inverting 3-state interface in a through-hole footprint (對比DM74LS240N)
  • Uses the same fundamental 74LS240 bus-driver function (對比MC74LS240N)
  • Supports grouped output disabling without changing the 20-pin logic footprint (對比SN74LS240J)

設計說明

Mount the DIP with pin 1 oriented toward the component-designator and silk-screen outline, and verify the top-side versus bottom-side insertion orientation. Route the supply and ground pins directly to the nearest suitable bypass capacitor rather than around long data traces. This is especially important for a legacy board because excessive loop length can increase ground bounce during simultaneous output switching.

Keep enabled outputs from simultaneously driving a node shared with another three-state device. Define the enable truth table at the system level and include a startup state that prevents contention. Account for inversion when assigning clock, reset, and address functions. For longer or heavily loaded traces, evaluate edge degradation, bus capacitance, and the output-drive limits stated in the applicable manufacturer datasheet.

Place a ceramic bypass capacitor close to the 5 V supply pin and provide local bulk capacitance where multiple digital devices share the rail. Use a short ground return to the DIP ground pin. The capacitor voltage rating should tolerate supply transients and DC bias effects, while its placement should minimize high-frequency loop area. Confirm the device's recommended operating conditions against the actual rail tolerance.

Do not treat every 74LS240 footprint as an unconditional substitute. Verify the number and polarity of output-enable inputs, the grouping of enabled channels, package construction, temperature grade, qualification status, propagation delay, and load-current limits. Also verify whether the original design expects inverted data. A mechanical fit and matching truth table alone do not prove that timing, noise margin, and environmental requirements are preserved.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The catalog information does not provide a device-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration. Compliance must be established from the applicable manufacturer or supplier documentation before procurement.

相關搜尋

SN74LS240H datasheet SN74LS240H pinout SN74LS240H datasheet pdf SN74LS240H equivalent SN74LS240H replacement SN74LS240H cross reference SN74LS240H vs DM74LS240N SN74LS240H vs MC74LS240N SN74LS240H 20-pin PDIP onsemi SN74LS240H SN74LS240H price SN74LS240H stock

相關元件與詞彙

onsemi SN74LS240H SN74LS240J SN74LS240N DM74LS240N MC74LS240N octal buffer line driver three-state output inverting logic bipolar logic Low-Power Schottky TTL logic buffer IC digital logic IC semiconductor 20-pin PDIP DIP package through-hole package 4.75 V to 5.25 V power supply shared digital bus memory address driver clock driver high-impedance output output enable
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情