Microchip Technology

ATF16V8CZ-12JC 12ns 250-Gate CPLD | Microchip Technology

MPN: ATF16V8CZ-12JC ✓ 啟用中
5 V Vdss 5 uA typical Id 20-pin PLCC, 9 x 9 mm Package 83 MHz Speed
MOQ: 1 |

ATF16V8CZ-12JC 概覽

The Microchip Technology ATF16V8CZ-12JC is a 250-gate simple programmable logic device with eight macrocells, up to 16 inputs, eight I/Os, 12 ns maximum pin-to-pin delay, and a 20-pin PLCC package measuring 9 x 9 mm. The ATF16V8CZ family uses electrically erasable Flash memory and provides zero-power operation with a 5 V supply.

A simple programmable logic device is a digital semiconductor that implements a fixed sum-of-products logic function through user-programmed configuration memory. The ATF16V8CZ belongs to the SPLD hierarchy, where each of its eight macrocells combines product terms and output control functions. Its architecture can directly replace the 16R8 family and most 20-pin combinatorial PLDs, making it useful for consolidating several fixed-format logic functions onto one device.

Principal features include 250 gates, eight macrocells, 16 input paths, eight I/Os, and a maximum propagation delay of 12 ns. The device supports CMOS- and TTL-compatible inputs and outputs. A typical 5 uA edge-sensing power-down mode and a 25 uA standby current help reduce consumption when the active input edges stop. Because the configuration is electrically erasable, the logic can be changed without a dedicated programmer.

The ATF16V8CZ architecture assigns eight product terms to each output and provides configurable operating modes for more complex combinational functions. Its Flash-based configuration technology permits electrical erasure and reprogramming, while its 83 MHz maximum operating frequency supports control logic operating well beyond the external logic delay limit. The exact input and output architecture should be confirmed in the manufacturer pin-description table before assigning PCB signals.

Typical applications include industrial control interfaces, legacy peripheral decoding, address and command multiplexing, alarm and interlocks, data-routing logic, and compact glue-logic blocks around older processors. The device is particularly useful when a design needs many fixed logic functions but does not require a microcontroller or complex FPGA configuration system.

For a new PCB, confirm the 20-pin PLCC footprint, supply decoupling, programming access, and all unused-pin states against the manufacturer documentation. The -12 speed grade provides a 12 ns maximum pin-to-pin delay, so timing-sensitive paths should be evaluated with the actual output loading and system clock arrangement.

This page combines package, logic-capacity, timing, power-mode, and compatibility information with application guidance, pinout-location advice, replacement considerations, and a parameter-by-parameter comparison. It is designed to help engineers identify whether the ATF16V8CZ-12JC matches an existing CPLD or legacy PLD design before beginning board conversion.

直接替換替代品,適用於 ATF16V8CZ-12JC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: ATF16V8CZ-12JC (相同外形與佔位) — 差異在於 Architecture, Device Type, Input Compatibility, Macrocells, Maximum Frequency.

Microchip Technology
Architecture: 16V8
Device Type: Electrically Erasable Programmable Logic Device (EEPLD)
Input Compatibility: CMOS and TTL
比較對象 ATF16V8CZ-12JC →

ATF16V8CZ-10JC

✅ 直接替換 ⚠️ 規格未經驗證
📦 20-PLCC (9x9)
Maximum pin-to-pin delay is 10 ns versus 12 ns on the target, a 16.7% reduction, while retaining the ATF16V8CZ architecture, 5 V supply, 250-gate capacity, and 20-pin PLCC format

📋 參考替代品(不在目錄中)

ATF16V8CZ-15JC

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 20-PLCC (9x9)
Electrically Erasable Programmable Logic Device (EEPLD) · 16V8 · 250 gates · 8 macrocells · 16 inputs · 8 I/Os · 8 product terms · 5 V

聯絡詢價

查看資料表 →

ATF16V8CZ-12JC 最大額定值與電氣特性

Device Type Simple Programmable Logic Device (SPLD)
Architecture ATF16V8CZ
Logic Capacity 250 gates
Macrocells 8
Maximum Inputs 16
I/O Count 8
Maximum Pin-to-Pin Delay 12 ns
Maximum Frequency 83 MHz
供應電壓 5 V
Edge-Sensing Power-Down Current 5 uA typical
Standby Current 25 uA
Configuration Technology Electrically erasable Flash memory
封裝 20-pin PLCC, 9 x 9 mm
安裝類型 Surface Mount
Temperature Grade Commercial temperature
Input Compatibility CMOS and TTL compatible
Output Compatibility CMOS and TTL compatible
Product Terms per Output 8
Legacy Compatibility Direct replacement of 16R8 family and most 20-pin combinatorial PLDs
Power-Down Mode Edge-sensing

ATF16V8CZ-12JC 20-pin plcc, 9 x 9 mm 腳位配置指南

ATF16V8CZ-12JC(20-pin plcc, 9 x 9 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

ATF16V8CZ-12JC 的 20-pin plcc, 9 x 9 mm 封裝腳位圖

無詳細腳位定義資料: ATF16V8CZ-12JC.

請參閱 資料表 以查看完整腳位配置。

典型應用

ATF16V8CZ-12JC 適用於 6 應用s: Industrial Control and Interlock Logic, Legacy Processor Address Decoding, Peripheral Interface and Signal Routing, Data Sorting and Conditional Routing, Alarm and Safety Monitoring Logic, Retrofit and Legacy Board Replacement.

🏭

Industrial Control and Interlock Logic

The ATF16V8CZ-12JC fits compact industrial control blocks that combine several Boolean conditions before driving relays, indicators, or machine actuators. Its eight macrocells and 250-gate capacity can implement interlocking, alarm qualification, and command sequencing without adding a microcontroller. The 12 ns maximum pin-to-pin delay helps preserve timing relationships in short control paths, while the 20-pin PLCC package supports compact retrofit boards. Electrically erasable Flash configuration is especially useful when field logic must be revised without changing the PCB. Confirm the commercial temperature grade against the actual enclosure temperature and validate all relay-driving interface stages rather than driving inductive loads directly from the device.

🖥️

Legacy Processor Address Decoding

The ATF16V8CZ-12JC is useful for address and command decoding around older microprocessors, bus peripherals, and memory-mapped interfaces. Its combinational architecture supports up to 16 inputs and eight outputs, allowing chip selects, read and write strobes, interrupt qualification, and address decoding to be consolidated. The 12 ns speed grade can reduce decode-path uncertainty, while the electrically erasable configuration simplifies logic revisions during legacy-system maintenance. Designers should evaluate the actual propagation delay in each address-to-enable path and include the required input and output timing in the system timing budget. PCB conversion also requires checking PLCC pin assignments, power rails, and the treatment of unused I/O pins.

🔧

Peripheral Interface and Signal Routing

The ATF16V8CZ-12JC can implement fixed-format routing, multiplexing, polarity conversion, and interface qualification between slower legacy processors and external equipment. Its eight output macrocells provide flexible product-term logic without the resource overhead of a general-purpose FPGA. A maximum 12 ns pin-to-pin delay is useful for short synchronous control paths, although it should not be treated as a substitute for a modern high-speed transceiver. Electrically erasable Flash memory allows connector assignments and control functions to be revised as hardware configurations change. Validate voltage compatibility with the connected logic, respect the device's absolute maximum conditions, and confirm that every unused PLCC terminal is handled according to Microchip's pin-description table.

🌐

Data Sorting and Conditional Routing

The ATF16V8CZ-12JC is appropriate for small data-routing networks where several conditional paths must select or qualify parallel signals. Up to 16 inputs and eight outputs provide enough capacity for priority logic, status filtering, and format conversion that would otherwise consume multiple gates. Its 12 ns maximum delay supports short pipeline stages in older control equipment, while the 20-pin PLCC package simplifies repair and board replacement. Because an SPLD has fixed macrocell resources, designers must check the required product terms and register configuration before committing to the architecture. Signal-integrity checks should include output loading, grounding, and any use of registered outputs with a system clock.

🔔

Alarm and Safety Monitoring Logic

The ATF16V8CZ-12JC can implement alarm-latch, threshold-comparison, debounce, and fault-summary logic when the monitored signals are already in digital form. Its eight macrocells allow several independent fault channels to be combined into system status outputs, and the 12 ns speed grade supports prompt propagation through short combinational paths. The electrically erasable configuration helps teams revise alarm behavior without replacing the device, subject to the validation required by the final equipment. For safety-related equipment, confirm that the device's qualification, temperature rating, diagnostics, and single-fault behavior satisfy the applicable risk assessment. The commercial grade should not be assumed suitable for every industrial or automotive environment.

🧩

Retrofit and Legacy Board Replacement

The ATF16V8CZ-12JC is well suited to repairing or modernizing boards built around ATF16V8, 16R8, and compatible 20-pin combinatorial PLD logic. Its architecture is described as a direct replacement for the 16R8 family and most 20-pin combinatorial PLDs, while electrically erasable Flash configuration allows a replacement to be programmed for the recovered logic function. The 20-pin PLCC package matches the target device format, and the 12 ns rating preserves the original speed class. A successful replacement still requires comparison of pin functions, power-down behavior, output polarity, timing, and package orientation. Recover and validate the configuration file before removing the original device from production equipment.

What is the ATF16V8CZ-12JC?
The ATF16V8CZ-12JC is a Microchip Technology 250-gate SPLD with eight macrocells, up to 16 inputs, eight I/Os, and a 12 ns maximum pin-to-pin delay. According to Microchip's ATF16V8CZ datasheet, it uses electrically erasable Flash memory, operates from a 5 V supply, and is packaged in a 20-pin PLCC measuring 9 x 9 mm. It is intended for compact combinational and registered control logic where a microcontroller would add unnecessary cost or complexity.
What are the key specifications of ATF16V8CZ-12JC?
The ATF16V8CZ-12JC provides 250 gates, eight macrocells, up to 16 inputs, eight I/Os, and 12 ns maximum pin-to-pin delay in a 20-pin PLCC package. According to Microchip's ATF16V8CZ datasheet, the device operates at 5 V, supports CMOS- and TTL-compatible signals, and offers an 83 MHz maximum frequency. Its electrically erasable Flash configuration permits logic revision without a dedicated programmer.
Where can I download the ATF16V8CZ-12JC datasheet PDF?
The ATF16V8CZ-12JC datasheet PDF is available from Microchip's ATF16V8CZ product page and the linked ATF16V8CZ technical document. According to Microchip's ATF16V8CZ datasheet, the document covers the 250-gate architecture, eight macrocells, 16 inputs, eight I/Os, electrical characteristics, programming information, and package details. Use the pin-description table and package drawing in that document when creating a PCB footprint.
Where can I find the ATF16V8CZ-12JC pinout?
The ATF16V8CZ-12JC pinout is found in the pin-description table and package drawing within Microchip's ATF16V8CZ datasheet. The device uses a 20-pin PLCC package, so a board designer must verify every signal against the 9 x 9 mm footprint rather than rely only on a generic PLCC drawing. In particular, confirm the supply pins, clock or feedback assignments, programming signals, and unused-pin requirements before routing the PCB.
Can ATF16V8CZ-12JC replace a 16R8 or 20-pin combinatorial PLD?
Yes, the ATF16V8CZ architecture is designed for direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. According to Microchip's ATF16V8CZ datasheet, each of the eight outputs is allocated eight product terms, and configurable operating modes support more complex logic. Compatibility still depends on matching the PLCC footprint, pin functions, output polarity, register behavior, timing grade, and unused-pin treatment in the original design.
What is the difference between ATF16V8CZ-12JC and ATF16V8B-15PC?
The ATF16V8CZ-12JC is a 12 ns Flash-configured ATF16V8CZ device in a 20-pin PLCC, while the ATF16V8B-15PC is a 15 ns ATF16V8B-family device listed in a 20-pin plastic-DIP package. The 4 ns speed difference is approximately 33%, and the package differs, so the ATF16V8B-15PC is not a board-level drop-in replacement for the ATF16V8CZ-12JC despite related logic capabilities.
When should I choose ATF16V8CZ-12JC over a slower ATF16V8CZ grade?
Choose the ATF16V8CZ-12JC when a timing path cannot tolerate the propagation delay of a slower ATF16V8CZ grade. The -12 grade is rated for 12 ns maximum pin-to-pin delay, whereas a 15 ns grade adds approximately 25% delay relative to the -12 part. If the slower grade meets the design margin, it may be preferable for power or sourcing considerations, but available operating conditions and lifecycle status should be confirmed before selection.
Is ATF16V8CZ-12JC suitable for industrial control logic?
The ATF16V8CZ-12JC is suitable for industrial control logic when its commercial temperature grade and electrical limits fit the enclosure conditions. The device offers 250 gates, eight macrocells, 12 ns maximum pin-to-pin delay, and electrically erasable Flash configuration. According to Microchip's ATF16V8CZ datasheet, its power-down current is typically 5 uA and standby current is 25 uA, making it useful for low-activity control sections with mixed digital functions.
What can replace the ATF16V8CZ-12JC?
The closest verified drop-in choices are the ATF16V8CZ-10JC and ATF16V8CZ-15JC because they retain the same 20-pin PLCC format, 5 V supply architecture, 250-gate capacity, and ATF16V8CZ logic organization. The -10JC is faster, with a 10 ns delay, while the -15JC is slower at 15 ns. A board replacement still requires confirming pin functions, timing, programming configuration, and any temperature-grade differences.
Is the ATF16V8CZ-12JC the same as an ATF16V8B-15PC?
No, the ATF16V8CZ-12JC and ATF16V8B-15PC are not identical board-level devices. Their rated maximum pin-to-pin delays are 12 ns and 15 ns, respectively, and their listed packages are 20-pin PLCC and 20-pin plastic DIP. Although both belong to related ATF16V8 logic families, package, timing, configuration technology, and possibly architecture details differ, so the ATF16V8B-15PC requires a board conversion rather than a literal drop-in substitution.
How much current does the ATF16V8CZ-12JC use in low-power modes?
The ATF16V8CZ-12JC offers a typical 5 uA edge-sensing power-down current and a 25 uA standby current. According to Microchip's ATF16V8CZ datasheet, the edge-sensing mode helps the device enter a low-power state when input activity ceases. These figures describe low-activity operation; active supply current and temperature effects should still be checked against the manufacturer's electrical-characteristics table for the complete power budget.
Where can I buy ATF16V8CZ-12JC and check its lead time?
Use the Request a Quote form on this page to request ATF16V8CZ-12JC pricing, current stock, minimum order quantity, and production lead time. The ATF16V8CZ-12JC is offered as a 20-pin PLCC device, but availability can vary by package suffix, temperature grade, programmed configuration, and manufacturing status. Request the exact MPN and intended commercial quantity so procurement can confirm a traceable supply option.
What is the price of ATF16V8CZ-12JC?
Current ATF16V8CZ-12JC pricing is obtained through the Request a Quote form on this page because commercial terms can change with quantity, configuration status, and market conditions. The product is a 250-gate, eight-macrocell, 12 ns SPLD in a 20-pin PLCC package. When requesting a quotation, identify whether unprogrammed devices, a specific programmed configuration, or an approved sourcing channel is required.
Is ATF16V8CZ-12JC in stock?
Current inventory for the ATF16V8CZ-12JC should be confirmed through the Request a Quote form on this page. Stock status depends on the exact package suffix, temperature grade, configuration requirement, and order quantity. Because this device is a programmable logic product rather than a generic catalog component, procurement should request confirmation of device identity, factory programmability, date codes, and traceability at the same time.
How do I program ATF16V8CZ-12JC logic?
The ATF16V8CZ-12JC is configured through its electrically erasable Flash memory using a compatible Atmel or Microchip programming tool and the approved device programming specification. According to Microchip's ATF16V8CZ datasheet, the configuration can be electrically erased and reprogrammed. Designers should preserve the device's programming interface requirements in the PCB and validate the fuse or configuration file against the exact MPN, package, and speed grade before production programming.
Is ATF16V8CZ-12JC RoHS compliant?
The RoHS compliance status of ATF16V8CZ-12JC must be confirmed from the current manufacturer product documentation or the compliance statement issued for the exact ordering code. The ATF16V8CZ-12JC is a Microchip Technology 20-pin PLCC SPLD with a 5 V supply and 12 ns speed grade, but package and temperature suffixes can affect the exact orderable item. Request the applicable material-compliance declaration when regulatory documentation is required.

工程參考資料,適用於 ATF16V8CZ-12JC — 比較、設計指引及合規資訊。

選型指南

Choose the ATF16V8CZ-12JC when an existing 20-pin PLCC design requires a 250-gate, eight-macrocell ATF16V8CZ device with a 12 ns maximum pin-to-pin delay and electrically erasable Flash configuration. Select the ATF16V8CZ-10JC for the same board format when additional timing margin is valuable; its 10 ns delay is 2 ns faster, but that extra speed does not add logic capacity. Select the ATF16V8CZ-15JC when the slower 15 ns propagation is acceptable and supply conditions favor that grade, though its delay is 25% higher than the target. The ATF16V8B-15PC is not a drop-in option because it has a 15 ns rating and plastic-DIP package. Before replacing any device, compare pin functions, output mode, configuration file, temperature grade, supply requirements, and unused-pin treatment. For a new design, the ATF16V8CZ-12JC is best when 12 ns meets the timing budget without paying for an unnecessarily faster grade.

與替代品比較

參數 本產品 ATF16V8CZ-10JC ATF16V8CZ-15JC
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-PLCC (9x9) 20-PLCC (9x9) 20-PLCC (9x9)
Maximum Pin-to-Pin Delay 12 ns 10 ns 15 ns
Speed Grade Relative to Target 12 ns baseline 16.7% faster 25% slower
Logic Capacity 250 gates 250 gates 250 gates
Macrocells 8 8 8
Maximum Inputs 16 16 16
I/O Count 8 8 8
Supply Voltage 5 V 5 V 5 V
Configuration Technology Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory

主要差異化特點

  • Provides a 2 ns faster rated delay than the 15 ns grade (對比ATF16V8CZ-15JC)
  • Retains the same package while avoiding the 10 ns grade's additional timing cost (對比ATF16V8CZ-10JC)
  • Preserves electrically erasable configuration for logic updates (對比ATF16V8B-15PC)

設計說明

Create the PCB footprint from the 20-pin PLCC package drawing and verify pin 1 orientation against the manufacturer diagram. PLCC sockets and surface-mount lands are not interchangeable, so a board conversion also requires checking lead pitch, body size, courtyard clearance, and the 9 x 9 mm package outline. Route the supply and ground pins directly to the associated planes, place the manufacturer-recommended bypass capacitor close to the device, and avoid placing high-current or switching-node traces beneath the package.

Do not assume that every ATF16V8-family device is mechanically or logically interchangeable. The ATF16V8B-15PC comparison part has a 20 ns slower rated delay and a plastic-DIP package, so it is not a direct PCB replacement for the ATF16V8CZ-12JC. Before substitution, compare supply voltage, pin functions, registered versus combinatorial outputs, power-down behavior, unused-pin treatment, temperature grade, and the programmed configuration. Confirm the result in the manufacturer's programmer and validate it with boundary-pattern testing.

Use the 12 ns maximum pin-to-pin delay as a timing constraint, not a guaranteed delay for every path. System timing must also include input setup requirements, output delay, clock distribution, loading, and variation across the 5 V supply and temperature range. Registered outputs require a clean, stable clock and suitable output loading. For control paths, include a margin analysis and avoid relying on an untested minimum-delay relationship when designing asynchronous handshake or pulse-capture logic.

Decouple the 5 V supply at the ATF16V8CZ-12JC using the capacitance and placement specified by Microchip's device documentation. The 5 uA typical edge-sensing power-down and 25 uA standby figures apply to low-power operating conditions and should not be treated as active current. Check output-state leakage and transition behavior when estimating standby power across the complete board, and account for pull-up or pull-down resistors that may consume current even while the device is inactive.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The exact ATF16V8CZ-12JC material-compliance declarations are not stated on the product pages. AEC-Q100 is not applicable to this commercial-temperature SPLD. Obtain the current manufacturer compliance documentation for the exact ordering code before using it in a regulated design.

相關搜尋

ATF16V8CZ-12JC datasheet ATF16V8CZ-12JC pinout ATF16V8CZ-12JC datasheet pdf ATF16V8CZ-12JC specifications ATF16V8CZ-12JC equivalent ATF16V8CZ-12JC replacement ATF16V8CZ-12JC cross reference ATF16V8CZ-12JC PLCC footprint ATF16V8CZ-12JC application circuit ATF16V8CZ-12JC price ATF16V8CZ-12JC stock Microchip ATF16V8CZ-12JC ATF16V8CZ-12JC vs ATF16V8B-15PC ATF16V8CZ-12JC vs ATF16V8CZ-10JC ATF16V8CZ 20-pin PLCC

相關元件與詞彙

Microchip Technology ATF16V8CZ-12JC ATF16V8CZ-10JC ATF16V8CZ-15JC ATF16V8B-15PC ATF16V8CZ Simple Programmable Logic Device SPLD Programmable Logic Device PLD Complex Programmable Logic Device CPLD Electrically Erasable Flash EECMOS logic gate macrocell product term pin-to-pin delay edge-sensing power-down CMOS TTL 20-pin PLCC PLCC package surface mount legacy logic replacement
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情