ATF16V8CZ-12JC 12ns 250-Gate CPLD | Microchip Technology
Teilenummer: ATF16V8CZ-12JC ✓ AktivATF16V8CZ-12JC Übersicht
A simple programmable logic device is a digital semiconductor that implements a fixed sum-of-products logic function through user-programmed configuration memory. The ATF16V8CZ belongs to the SPLD hierarchy, where each of its eight macrocells combines product terms and output control functions. Its architecture can directly replace the 16R8 family and most 20-pin combinatorial PLDs, making it useful for consolidating several fixed-format logic functions onto one device.
Principal features include 250 gates, eight macrocells, 16 input paths, eight I/Os, and a maximum propagation delay of 12 ns. The device supports CMOS- and TTL-compatible inputs and outputs. A typical 5 uA edge-sensing power-down mode and a 25 uA standby current help reduce consumption when the active input edges stop. Because the configuration is electrically erasable, the logic can be changed without a dedicated programmer.
The ATF16V8CZ architecture assigns eight product terms to each output and provides configurable operating modes for more complex combinational functions. Its Flash-based configuration technology permits electrical erasure and reprogramming, while its 83 MHz maximum operating frequency supports control logic operating well beyond the external logic delay limit. The exact input and output architecture should be confirmed in the manufacturer pin-description table before assigning PCB signals.
Typical applications include industrial control interfaces, legacy peripheral decoding, address and command multiplexing, alarm and interlocks, data-routing logic, and compact glue-logic blocks around older processors. The device is particularly useful when a design needs many fixed logic functions but does not require a microcontroller or complex FPGA configuration system.
For a new PCB, confirm the 20-pin PLCC footprint, supply decoupling, programming access, and all unused-pin states against the manufacturer documentation. The -12 speed grade provides a 12 ns maximum pin-to-pin delay, so timing-sensitive paths should be evaluated with the actual output loading and system clock arrangement.
This page combines package, logic-capacity, timing, power-mode, and compatibility information with application guidance, pinout-location advice, replacement considerations, and a parameter-by-parameter comparison. It is designed to help engineers identify whether the ATF16V8CZ-12JC matches an existing CPLD or legacy PLD design before beginning board conversion.
Drop-in-Alternativen für ATF16V8CZ-12JC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATF16V8CZ-12JC (gleiche Bauform und Footprint) – abweichend in Architecture, Device Type, Input Compatibility, Macrocells, Maximum Frequency.
ATF16V8CZ-10JC
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ATF16V8CZ-15JC
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →ATF16V8CZ-12JC Grenzwerte & elektrische Eigenschaften
| Device Type | Simple Programmable Logic Device (SPLD) |
| Architecture | ATF16V8CZ |
| Logic Capacity | 250 gates |
| Macrocells | 8 |
| Maximum Inputs | 16 |
| I/O Count | 8 |
| Maximum Pin-to-Pin Delay | 12 ns |
| Maximum Frequency | 83 MHz |
| Versorgungsspannung | 5 V |
| Edge-Sensing Power-Down Current | 5 uA typical |
| Standby Current | 25 uA |
| Configuration Technology | Electrically erasable Flash memory |
| Gehäuse | 20-pin PLCC, 9 x 9 mm |
| Montageart | Surface Mount |
| Temperature Grade | Commercial temperature |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| Product Terms per Output | 8 |
| Legacy Compatibility | Direct replacement of 16R8 family and most 20-pin combinatorial PLDs |
| Power-Down Mode | Edge-sensing |
ATF16V8CZ-12JC 20-pin plcc, 9 x 9 mm Pinbelegungsleitfaden
Pinbelegung für ATF16V8CZ-12JC (20-pin plcc, 9 x 9 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATF16V8CZ-12JC.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATF16V8CZ-12JC ist geeignet für 6 Anwendungs: Industrial Control and Interlock Logic, Legacy Processor Address Decoding, Peripheral Interface and Signal Routing, Data Sorting and Conditional Routing, Alarm and Safety Monitoring Logic, Retrofit and Legacy Board Replacement.
Industrial Control and Interlock Logic
The ATF16V8CZ-12JC fits compact industrial control blocks that combine several Boolean conditions before driving relays, indicators, or machine actuators. Its eight macrocells and 250-gate capacity can implement interlocking, alarm qualification, and command sequencing without adding a microcontroller. The 12 ns maximum pin-to-pin delay helps preserve timing relationships in short control paths, while the 20-pin PLCC package supports compact retrofit boards. Electrically erasable Flash configuration is especially useful when field logic must be revised without changing the PCB. Confirm the commercial temperature grade against the actual enclosure temperature and validate all relay-driving interface stages rather than driving inductive loads directly from the device.
Empfohlen
Legacy Processor Address Decoding
The ATF16V8CZ-12JC is useful for address and command decoding around older microprocessors, bus peripherals, and memory-mapped interfaces. Its combinational architecture supports up to 16 inputs and eight outputs, allowing chip selects, read and write strobes, interrupt qualification, and address decoding to be consolidated. The 12 ns speed grade can reduce decode-path uncertainty, while the electrically erasable configuration simplifies logic revisions during legacy-system maintenance. Designers should evaluate the actual propagation delay in each address-to-enable path and include the required input and output timing in the system timing budget. PCB conversion also requires checking PLCC pin assignments, power rails, and the treatment of unused I/O pins.
Empfohlen
Peripheral Interface and Signal Routing
The ATF16V8CZ-12JC can implement fixed-format routing, multiplexing, polarity conversion, and interface qualification between slower legacy processors and external equipment. Its eight output macrocells provide flexible product-term logic without the resource overhead of a general-purpose FPGA. A maximum 12 ns pin-to-pin delay is useful for short synchronous control paths, although it should not be treated as a substitute for a modern high-speed transceiver. Electrically erasable Flash memory allows connector assignments and control functions to be revised as hardware configurations change. Validate voltage compatibility with the connected logic, respect the device's absolute maximum conditions, and confirm that every unused PLCC terminal is handled according to Microchip's pin-description table.
Empfohlen
Data Sorting and Conditional Routing
The ATF16V8CZ-12JC is appropriate for small data-routing networks where several conditional paths must select or qualify parallel signals. Up to 16 inputs and eight outputs provide enough capacity for priority logic, status filtering, and format conversion that would otherwise consume multiple gates. Its 12 ns maximum delay supports short pipeline stages in older control equipment, while the 20-pin PLCC package simplifies repair and board replacement. Because an SPLD has fixed macrocell resources, designers must check the required product terms and register configuration before committing to the architecture. Signal-integrity checks should include output loading, grounding, and any use of registered outputs with a system clock.
Empfohlen
Alarm and Safety Monitoring Logic
The ATF16V8CZ-12JC can implement alarm-latch, threshold-comparison, debounce, and fault-summary logic when the monitored signals are already in digital form. Its eight macrocells allow several independent fault channels to be combined into system status outputs, and the 12 ns speed grade supports prompt propagation through short combinational paths. The electrically erasable configuration helps teams revise alarm behavior without replacing the device, subject to the validation required by the final equipment. For safety-related equipment, confirm that the device's qualification, temperature rating, diagnostics, and single-fault behavior satisfy the applicable risk assessment. The commercial grade should not be assumed suitable for every industrial or automotive environment.
Empfohlen
Retrofit and Legacy Board Replacement
The ATF16V8CZ-12JC is well suited to repairing or modernizing boards built around ATF16V8, 16R8, and compatible 20-pin combinatorial PLD logic. Its architecture is described as a direct replacement for the 16R8 family and most 20-pin combinatorial PLDs, while electrically erasable Flash configuration allows a replacement to be programmed for the recovered logic function. The 20-pin PLCC package matches the target device format, and the 12 ns rating preserves the original speed class. A successful replacement still requires comparison of pin functions, power-down behavior, output polarity, timing, and package orientation. Recover and validate the configuration file before removing the original device from production equipment.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATF16V8CZ-12JC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATF16V8CZ-10JC | ATF16V8CZ-15JC |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-PLCC (9x9) | 20-PLCC (9x9) | 20-PLCC (9x9) |
| Maximum Pin-to-Pin Delay | 12 ns | 10 ns | 15 ns |
| Speed Grade Relative to Target | 12 ns baseline | 16.7% faster | 25% slower |
| Logic Capacity | 250 gates | 250 gates | 250 gates |
| Macrocells | 8 | 8 | 8 |
| Maximum Inputs | 16 | 16 | 16 |
| I/O Count | 8 | 8 | 8 |
| Supply Voltage | 5 V | 5 V | 5 V |
| Configuration Technology | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
Wichtigste Unterscheidungsmerkmale
- Provides a 2 ns faster rated delay than the 15 ns grade (vs. ATF16V8CZ-15JC)
- Retains the same package while avoiding the 10 ns grade's additional timing cost (vs. ATF16V8CZ-10JC)
- Preserves electrically erasable configuration for logic updates (vs. ATF16V8B-15PC)
Designhinweise
Create the PCB footprint from the 20-pin PLCC package drawing and verify pin 1 orientation against the manufacturer diagram. PLCC sockets and surface-mount lands are not interchangeable, so a board conversion also requires checking lead pitch, body size, courtyard clearance, and the 9 x 9 mm package outline. Route the supply and ground pins directly to the associated planes, place the manufacturer-recommended bypass capacitor close to the device, and avoid placing high-current or switching-node traces beneath the package.
Do not assume that every ATF16V8-family device is mechanically or logically interchangeable. The ATF16V8B-15PC comparison part has a 20 ns slower rated delay and a plastic-DIP package, so it is not a direct PCB replacement for the ATF16V8CZ-12JC. Before substitution, compare supply voltage, pin functions, registered versus combinatorial outputs, power-down behavior, unused-pin treatment, temperature grade, and the programmed configuration. Confirm the result in the manufacturer's programmer and validate it with boundary-pattern testing.
Use the 12 ns maximum pin-to-pin delay as a timing constraint, not a guaranteed delay for every path. System timing must also include input setup requirements, output delay, clock distribution, loading, and variation across the 5 V supply and temperature range. Registered outputs require a clean, stable clock and suitable output loading. For control paths, include a margin analysis and avoid relying on an untested minimum-delay relationship when designing asynchronous handshake or pulse-capture logic.
Decouple the 5 V supply at the ATF16V8CZ-12JC using the capacitance and placement specified by Microchip's device documentation. The 5 uA typical edge-sensing power-down and 25 uA standby figures apply to low-power operating conditions and should not be treated as active current. Check output-state leakage and transition behavior when estimating standby power across the complete board, and account for pull-up or pull-down resistors that may consume current even while the device is inactive.
Compliance-Informationen
The exact ATF16V8CZ-12JC material-compliance declarations are not stated on the product pages. AEC-Q100 is not applicable to this commercial-temperature SPLD. Obtain the current manufacturer compliance documentation for the exact ordering code before using it in a regulated design.