ATF22LV10CZ-25JI - 10-Macrocell 25ns EEPLD | Microchip Technology
MPN: ATF22LV10CZ-25JI ✓ 啟用中ATF22LV10CZ-25JI 概覽
An EEPLD is an electrically erasable programmable logic device, a member of the programmable-logic-device hierarchy. Unlike a mask-programmed custom gate array, an EEPLD can be configured for a specific Boolean function after manufacture. Its macrocell-based architecture consolidates repeated logic patterns into reusable structures, making the device suitable for control, decoding, interface, and glue-logic functions where changing a programmed design is more convenient than fabricating a custom ASIC.
The ATF22LV10C family supports 3.0 V to 5.5 V operation and 10 macrocells organized around 500 gates. The -25 speed designation identifies a 25 ns propagation-delay grade, while the J suffix identifies the industrial-temperature ordering option. Its 28-PLCC surface-mount package provides a leaded alternative to the smaller 24-pin DIP arrangement and supports compact board layouts where a through-hole PLD is required.
Technically, the ATF22LV10C combines combinational and registered logic resources within an electrically erasable CMOS architecture. The high-performance EEPROM configuration memory preserves the implemented logic after power removal, allowing firmware or board-level programming to define the device rather than a permanent mask set. Speed grades are specified across the 3.0 V to 5.5 V supply range, allowing one device family to serve both conventional 5 V and lower-voltage 3.3 V systems when timing and output constraints are satisfied.
Typical uses include legacy industrial control, alarm and sequencing logic, instrumentation, peripheral decoding, and board-level interface glue. The 25 ns grade is appropriate where propagation delay remains below the system timing budget, while its 10-macrocell capacity limits larger designs to compact Boolean functions or modest state-machine implementations. Engineers should also account for the age of the architecture when selecting signal levels, programming tools, and modern system integration requirements.
For PCB implementation, preserve the manufacturer's PLCC footprint, provide unobstructed access to programming or test connections, and verify every signal against the pin-description table in the manufacturer datasheet. Power-supply decoupling and input-signal transition requirements should be implemented using the recommended circuit values rather than generic assumptions, especially when unused inputs and outputs are connected.
This product page consolidates the exact ordering information, verified family-level specifications, sourcing guidance, and practical implementation considerations for the ATF22LV10CZ-25JI. It also distinguishes true same-footprint alternatives from related ATF22LV10C variants whose speed grade, temperature grade, or package differs.
直接替換替代品,適用於 ATF22LV10CZ-25JI — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATF22LV10CZ-25JI (相同外形與佔位) — 差異在於 Architecture, Supply Voltage Range, Device Type, Package, Package Type.
ATF22LV10CZ-25PC
✅ 直接替換聯絡詢價
查看資料表 →ATF22LV10CZ-25LM
✅ 直接替換📋 參考替代品(不在目錄中)
ATF22LV10CQZ-30JC
✅ 直接替換聯絡詢價
查看資料表 →ATF22LV10C-10JC
✅ 直接替換聯絡詢價
查看資料表 →ATF22LV10CZ-25JI 最大額定值與電氣特性
| Device Type | Electrically Erasable Programmable Logic Device (EEPLD) |
| Device Family | ATF22LV10C |
| Macrocell Count | 10 macrocells |
| Gate Count | 500 gates |
| Propagation Delay | 25 ns |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Nominal Power Supply Levels | 3.3 V and 5 V |
| Program Memory Technology | Electrically erasable flash memory |
| Architecture | High-performance CMOS programmable logic device |
| Temperature Grade | Industrial |
| Package Type | 28-PLCC |
| Package Dimensions | 11.51 mm x 11.51 mm |
| 腳位數 | 28 pins |
| 安裝類型 | Surface mount |
| Logic Level | 3.3 V / 5 V |
| Special Features | SPLD - Simple Programmable Logic Devices |
ATF22LV10CZ-25JI 11.51 mm x 11.51 mm 腳位配置指南
ATF22LV10CZ-25JI(11.51 mm x 11.51 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATF22LV10CZ-25JI.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATF22LV10CZ-25JI 適用於 6 應用s: Industrial Sequencing Control, Alarm and Fault Decoding, Legacy Peripheral Interface, Test and Measurement Front Panel, Motor Control and Interlock Logic, Embedded Instrumentation and Data Acquisition.
Industrial Sequencing Control
The ATF22LV10CZ-25JI fits compact industrial sequencing and interlock logic because it combines 10 macrocells and 500 gates with a 25 ns propagation delay. It can implement state transitions, permissive checks, alarm decoding, and output sequencing without a custom mask. The 3.0 V to 5.5 V operating range supports both legacy 5 V control boards and 3.3 V logic sections. Its industrial-temperature ordering option is appropriate for equipment expected to operate outside benign commercial conditions, although the complete timing budget must still include sensor and actuator delays.
推薦
Alarm and Fault Decoding
The ATF22LV10CZ-25JI can decode multiple alarm, status, and fault signals into compact control outputs using its 10 macrocells. A 25 ns delay is suitable for many asynchronous status-detection paths, provided the surrounding system does not require sub-nanosecond or single-digit-nanosecond response. Operation across 3.0 V to 5.5 V helps maintain compatibility with legacy alarm panels, while nonvolatile electrically erasable configuration allows the logic map to be updated without replacing a custom ASIC.
推薦
Legacy Peripheral Interface
The ATF22LV10CZ-25JI is useful for adapting legacy peripheral buses through address decoding, chip-select generation, and handshake logic. Its 500-gate capacity is sufficient for compact interface functions, while the 25 ns propagation delay is appropriate for many processor-based systems that operate at moderate bus speeds. Engineers should verify the PLCC pin assignment, I/O timing, supply level, and input rise-time requirements against the manufacturer datasheet before replacing a hardwired decoder.
推薦
Test and Measurement Front Panel
The ATF22LV10CZ-25JI can implement panel routing, range selection, status-lamp multiplexing, and instrument-mode control in a 28-pin PLCC. Its 10 macrocells support compact Boolean combinations without introducing a microprocessor into every function. The 3.3 V and 5 V compatibility is useful when a measurement instrument combines modern digital sections with older control logic. For new high-speed instrumentation, verify the 25 ns timing grade against display, relay, ADC, and backplane interface requirements.
推薦
Motor Control and Interlock Logic
The ATF22LV10CZ-25JI can provide command decoding, direction interlocks, and contactor-enable sequencing around a motor controller. Its 500 programmable gates are sufficient for compact auxiliary logic that does not require the responsiveness of a dedicated real-time processor. The 25 ns grade introduces little delay in typical command qualification paths, while 3.0 V to 5.5 V operation permits integration with a mix of legacy control and modern logic voltages. A safety-related motor system still requires independent protective measures and appropriate qualification.
推薦
Embedded Instrumentation and Data Acquisition
The ATF22LV10CZ-25JI can handle channel enables, range-control decoding, trigger routing, and status aggregation in compact acquisition systems. Its electrically erasable configuration makes it practical to reuse the same board for several instrument configurations without changing a custom silicon design. The 3.0 V to 5.5 V supply range supports mixed-generation hardware, but timing closure must include ADC control latency, comparator response, and isolation delays. The 28-PLCC package also simplifies rework in serviceable industrial equipment.
推薦
推薦產品摘要
工程參考資料,適用於 ATF22LV10CZ-25JI — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATF22LV10CZ-25PC | ATF22LV10CZ-25LM | ATF22LV10CQZ-30JC | ATF22LV10C-10JC |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) |
| Device Type | EEPLD | EEPLD | EEPLD | EEPLD | EEPLD |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Gate Count | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Propagation Delay | 25 ns | 25 ns | 25 ns | 30 ns | 10 ns |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Programming Memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
| Number of Pins | 28 pins | 28 pins | 28 pins | 28 pins | 28 pins |
主要差異化特點
- Direct 25 ns timing grade for the target industrial ordering option (對比ATF22LV10CQZ-30JC)
- Industrial-temperature ordering configuration (對比ATF22LV10CZ-25PC)
- Lower propagation delay than the 30 ns family variant (對比ATF22LV10C-10JC)
設計說明
Use the manufacturer PLCC land pattern and pin-1 orientation without relocating signal or programming nets between variants. Keep the 28-pin footprint unchanged when evaluating the listed ATF22LV10C alternatives, and confirm that exposed leads receive adequate solder-joint length. A footprint-compatible part is not automatically a functional substitute if a pin is used for programming, clocking, feedback, or a dedicated control function.
Validate every external signal for the 25 ns propagation-delay grade at the actual 3.3 V or 5 V supply condition. Include macrocell propagation delay, input rise and fall time, output loading, and any external clock uncertainty in the timing budget. The faster ATF22LV10C-10JC provides additional margin, while the 30 ns ATF22LV10CQZ-30JC reduces it and may not satisfy a path originally closed around the 25 ns part.
Follow the manufacturer schematic for supply decoupling and programming-related connections. Place the required bypass capacitor close to the PLCC power and ground pins, provide a low-impedance return path, and avoid routing noisy motor or relay currents near the device. Check output drive current and voltage levels against the connected logic family before tying inputs to 3.3 V or 5 V circuitry.
Do not select a replacement from the 22V10 family name alone. Compare the complete ordering code, package, speed grade, temperature range, pin functions, and programming method. The target uses the industrial-temperature 25 ns ordering option, so a 30 ns grade changes timing margin and another suffix may change qualification without changing the PLCC body.
合規資訊
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code. AEC-Q100 is treated as not applicable because this is an industrial programmable-logic device rather than an automotive-qualified ordering option.