ATF22LV10CZ-25JI - 10-Macrocell 25ns EEPLD | Microchip Technology
MPN: ATF22LV10CZ-25JI ✓ فعالATF22LV10CZ-25JI نمای کلی
An EEPLD is an electrically erasable programmable logic device, a member of the programmable-logic-device hierarchy. Unlike a mask-programmed custom gate array, an EEPLD can be configured for a specific Boolean function after manufacture. Its macrocell-based architecture consolidates repeated logic patterns into reusable structures, making the device suitable for control, decoding, interface, and glue-logic functions where changing a programmed design is more convenient than fabricating a custom ASIC.
The ATF22LV10C family supports 3.0 V to 5.5 V operation and 10 macrocells organized around 500 gates. The -25 speed designation identifies a 25 ns propagation-delay grade, while the J suffix identifies the industrial-temperature ordering option. Its 28-PLCC surface-mount package provides a leaded alternative to the smaller 24-pin DIP arrangement and supports compact board layouts where a through-hole PLD is required.
Technically, the ATF22LV10C combines combinational and registered logic resources within an electrically erasable CMOS architecture. The high-performance EEPROM configuration memory preserves the implemented logic after power removal, allowing firmware or board-level programming to define the device rather than a permanent mask set. Speed grades are specified across the 3.0 V to 5.5 V supply range, allowing one device family to serve both conventional 5 V and lower-voltage 3.3 V systems when timing and output constraints are satisfied.
Typical uses include legacy industrial control, alarm and sequencing logic, instrumentation, peripheral decoding, and board-level interface glue. The 25 ns grade is appropriate where propagation delay remains below the system timing budget, while its 10-macrocell capacity limits larger designs to compact Boolean functions or modest state-machine implementations. Engineers should also account for the age of the architecture when selecting signal levels, programming tools, and modern system integration requirements.
For PCB implementation, preserve the manufacturer's PLCC footprint, provide unobstructed access to programming or test connections, and verify every signal against the pin-description table in the manufacturer datasheet. Power-supply decoupling and input-signal transition requirements should be implemented using the recommended circuit values rather than generic assumptions, especially when unused inputs and outputs are connected.
This product page consolidates the exact ordering information, verified family-level specifications, sourcing guidance, and practical implementation considerations for the ATF22LV10CZ-25JI. It also distinguishes true same-footprint alternatives from related ATF22LV10C variants whose speed grade, temperature grade, or package differs.
جایگزینهای drop-in برای ATF22LV10CZ-25JI — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ATF22LV10CZ-25JI (همان فرمفاکتور و فوتپرینت) — متفاوت در Architecture, Supply Voltage Range, Device Type, Package, Package Type.
ATF22LV10CZ-25PC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22LV10CZ-25LM
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATF22LV10CQZ-30JC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22LV10C-10JC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22LV10CZ-25JI حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Electrically Erasable Programmable Logic Device (EEPLD) |
| Device Family | ATF22LV10C |
| Macrocell Count | 10 macrocells |
| Gate Count | 500 gates |
| Propagation Delay | 25 ns |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Nominal Power Supply Levels | 3.3 V and 5 V |
| Program Memory Technology | Electrically erasable flash memory |
| Architecture | High-performance CMOS programmable logic device |
| Temperature Grade | Industrial |
| Package Type | 28-PLCC |
| Package Dimensions | 11.51 mm x 11.51 mm |
| تعداد پایه | 28 pins |
| نوع نصب | Surface mount |
| Logic Level | 3.3 V / 5 V |
| Special Features | SPLD - Simple Programmable Logic Devices |
راهنمای پیکربندی پین ATF22LV10CZ-25JI 11.51 mm x 11.51 mm
پیکربندی پین برای ATF22LV10CZ-25JI (پکیج 11.51 mm x 11.51 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای ATF22LV10CZ-25JI.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ATF22LV10CZ-25JI مناسب است برای 6 کاربردs: Industrial Sequencing Control, Alarm and Fault Decoding, Legacy Peripheral Interface, Test and Measurement Front Panel, Motor Control and Interlock Logic, Embedded Instrumentation and Data Acquisition.
Industrial Sequencing Control
The ATF22LV10CZ-25JI fits compact industrial sequencing and interlock logic because it combines 10 macrocells and 500 gates with a 25 ns propagation delay. It can implement state transitions, permissive checks, alarm decoding, and output sequencing without a custom mask. The 3.0 V to 5.5 V operating range supports both legacy 5 V control boards and 3.3 V logic sections. Its industrial-temperature ordering option is appropriate for equipment expected to operate outside benign commercial conditions, although the complete timing budget must still include sensor and actuator delays.
پیشنهادی
Alarm and Fault Decoding
The ATF22LV10CZ-25JI can decode multiple alarm, status, and fault signals into compact control outputs using its 10 macrocells. A 25 ns delay is suitable for many asynchronous status-detection paths, provided the surrounding system does not require sub-nanosecond or single-digit-nanosecond response. Operation across 3.0 V to 5.5 V helps maintain compatibility with legacy alarm panels, while nonvolatile electrically erasable configuration allows the logic map to be updated without replacing a custom ASIC.
پیشنهادی
Legacy Peripheral Interface
The ATF22LV10CZ-25JI is useful for adapting legacy peripheral buses through address decoding, chip-select generation, and handshake logic. Its 500-gate capacity is sufficient for compact interface functions, while the 25 ns propagation delay is appropriate for many processor-based systems that operate at moderate bus speeds. Engineers should verify the PLCC pin assignment, I/O timing, supply level, and input rise-time requirements against the manufacturer datasheet before replacing a hardwired decoder.
پیشنهادی
Test and Measurement Front Panel
The ATF22LV10CZ-25JI can implement panel routing, range selection, status-lamp multiplexing, and instrument-mode control in a 28-pin PLCC. Its 10 macrocells support compact Boolean combinations without introducing a microprocessor into every function. The 3.3 V and 5 V compatibility is useful when a measurement instrument combines modern digital sections with older control logic. For new high-speed instrumentation, verify the 25 ns timing grade against display, relay, ADC, and backplane interface requirements.
پیشنهادی
Motor Control and Interlock Logic
The ATF22LV10CZ-25JI can provide command decoding, direction interlocks, and contactor-enable sequencing around a motor controller. Its 500 programmable gates are sufficient for compact auxiliary logic that does not require the responsiveness of a dedicated real-time processor. The 25 ns grade introduces little delay in typical command qualification paths, while 3.0 V to 5.5 V operation permits integration with a mix of legacy control and modern logic voltages. A safety-related motor system still requires independent protective measures and appropriate qualification.
پیشنهادی
Embedded Instrumentation and Data Acquisition
The ATF22LV10CZ-25JI can handle channel enables, range-control decoding, trigger routing, and status aggregation in compact acquisition systems. Its electrically erasable configuration makes it practical to reuse the same board for several instrument configurations without changing a custom silicon design. The 3.0 V to 5.5 V supply range supports mixed-generation hardware, but timing closure must include ADC control latency, comparator response, and isolation delays. The 28-PLCC package also simplifies rework in serviceable industrial equipment.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ATF22LV10CZ-25JI — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ATF22LV10CZ-25PC | ATF22LV10CZ-25LM | ATF22LV10CQZ-30JC | ATF22LV10C-10JC |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) |
| Device Type | EEPLD | EEPLD | EEPLD | EEPLD | EEPLD |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Gate Count | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Propagation Delay | 25 ns | 25 ns | 25 ns | 30 ns | 10 ns |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Programming Memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
| Number of Pins | 28 pins | 28 pins | 28 pins | 28 pins | 28 pins |
تفاوتهای کلیدی
- Direct 25 ns timing grade for the target industrial ordering option (در مقابلATF22LV10CQZ-30JC)
- Industrial-temperature ordering configuration (در مقابلATF22LV10CZ-25PC)
- Lower propagation delay than the 30 ns family variant (در مقابلATF22LV10C-10JC)
یادداشتهای طراحی
Use the manufacturer PLCC land pattern and pin-1 orientation without relocating signal or programming nets between variants. Keep the 28-pin footprint unchanged when evaluating the listed ATF22LV10C alternatives, and confirm that exposed leads receive adequate solder-joint length. A footprint-compatible part is not automatically a functional substitute if a pin is used for programming, clocking, feedback, or a dedicated control function.
Validate every external signal for the 25 ns propagation-delay grade at the actual 3.3 V or 5 V supply condition. Include macrocell propagation delay, input rise and fall time, output loading, and any external clock uncertainty in the timing budget. The faster ATF22LV10C-10JC provides additional margin, while the 30 ns ATF22LV10CQZ-30JC reduces it and may not satisfy a path originally closed around the 25 ns part.
Follow the manufacturer schematic for supply decoupling and programming-related connections. Place the required bypass capacitor close to the PLCC power and ground pins, provide a low-impedance return path, and avoid routing noisy motor or relay currents near the device. Check output drive current and voltage levels against the connected logic family before tying inputs to 3.3 V or 5 V circuitry.
Do not select a replacement from the 22V10 family name alone. Compare the complete ordering code, package, speed grade, temperature range, pin functions, and programming method. The target uses the industrial-temperature 25 ns ordering option, so a 30 ns grade changes timing margin and another suffix may change qualification without changing the PLCC body.
اطلاعات انطباق
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code. AEC-Q100 is treated as not applicable because this is an industrial programmable-logic device rather than an automotive-qualified ordering option.