BCM5482A2IFBG - Dual-Port Gigabit Ethernet PHY | Broadcom
MPN: BCM5482A2IFBG ✓ 啟用中BCM5482A2IFBG 概覽
An Ethernet PHY is an interface IC within the Ethernet transceiver hierarchy. Its primary function is to convert digital data from a MAC or network controller into signals suitable for twisted-pair cabling, while receiving and recovering incoming signals. A physical-layer transceiver bridges the digital Ethernet controller and the analog, cable-facing network interface. The BCM5482A2IFBG supports three speed categories within one device: 10 Mb/s Ethernet, Fast Ethernet at 100 Mb/s, and Gigabit Ethernet at 1 Gb/s.
The principal feature of BCM5482A2IFBG is its dual-port architecture, allowing two 10/100/1000BASE-T network connections to be implemented with one PHY package. Automatic support for 10 Mb/s, 100 Mb/s, and 1 Gb/s operation allows one Ethernet port to accommodate legacy and modern link speeds. Compliance with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab connects the device to the relevant Ethernet and 1000BASE-T physical-layer specifications. RoHS details are identified in a published comparison of this Broadcom part.
The BCM5482 family combines a conventional Ethernet PHY role with integrated transceiver functionality. Each port therefore requires a suitable magnetic-interface network path, termination, and protection network in addition to normal digital connections to the Ethernet controller. The 121-pin BGA package supports compact multi-port equipment layouts, but its dense ball pitch makes PCB assembly, inspection, and rework more demanding than a leaded package. Accurate land patterns, layer-stack requirements, and assembly-process limits should be taken directly from the Broadcom package documentation.
Typical uses include industrial Ethernet switches, network-interface controllers, routers, gateways, set-top equipment, and embedded systems that require two copper Ethernet links. In these systems, the device can reduce the number of separate PHY packages compared with a two-chip implementation. Its 1 Gb/s capability supports high-volume file transfer and backbone aggregation, while 100 Mb/s and 10 Mb/s support allows each port to negotiate a compatible speed with legacy equipment.
Design the magnetic-interface and analog network sections away from clocks, switching regulators, and high-speed digital routing. Keep the PHY supplies, decoupling network, reference components, and clock source stable because network margin depends on clean power and low-noise timing. PCB stack-up, controlled-impedance routing, via geometry, and the manufacturer’s recommended land pattern are critical when reproducing a qualified 121-pin BGA layout.
This page organizes the BCM5482A2IFBG specifications, sourcing guidance, candidate replacements, and practical Ethernet hardware considerations. It also distinguishes confirmed same-package candidates from designs that require a different PHY or require board-level revalidation before replacement.
直接替換替代品,適用於 BCM5482A2IFBG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
BCM5482SA2IFBG
✅ 直接替換📋 參考替代品(不在目錄中)
BCM5482SHEA2IFBG
✅ 直接替換📋 參考替代品(不在目錄中)
BCM54240C1IFBG
✅ 直接替換📋 參考替代品(不在目錄中)
BCM54680B0KFBG
✅ 直接替換📋 參考替代品(不在目錄中)
BCM5482A2IFBG-ND
✅ 直接替換📋 參考替代品(不在目錄中)
BCM5482A2IFBG 最大額定值與電氣特性
| Product Type | Dual-port Ethernet physical-layer transceiver |
| Number of Ports | 2 ports |
| Supported Data Rates | 10 Mb/s, 100 Mb/s, and 1 Gb/s |
| Fast Ethernet Support | 100BASE-T |
| Gigabit Ethernet Support | 1000BASE-T |
| Ethernet Compliance | IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab |
| Package Type | 121-pin ball grid array |
| 安裝類型 | Surface mount |
| Transceiver Integration | Integrated Ethernet transceiver |
| Port Configuration | Dual-port 10/100/1000BASE-T |
| Data Link Modes | Full-duplex and half-duplex |
| RoHS 狀態 | Details available in manufacturer comparison data |
| Maximum Link Rate | 1 Gb/s per port |
| Minimum Link Rate | 10 Mb/s per port |
BCM5482A2IFBG 121-pin ball grid array 腳位配置指南
BCM5482A2IFBG(121-pin ball grid array 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: BCM5482A2IFBG.
請參閱 資料表 以查看完整腳位配置。
典型應用
BCM5482A2IFBG 適用於 6 應用s: Industrial Ethernet Switch, Network Interface Controller, Router and Gateway, Set-Top and Home Gateway, Embedded Control System, Network Test and Measurement.
Industrial Ethernet Switch
The BCM5482A2IFBG fits an industrial Ethernet switch that requires two integrated copper-network ports. Each port supports 10 Mb/s, 100 Mb/s, and 1 Gb/s, allowing the design to accommodate legacy 10BASE-T and 100BASE-T devices as well as Gigabit equipment. The 121-pin BGA package limits board area compared with two separate high-speed PHYs, while IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab compliance provides a defined physical-layer basis. Keep each channel’s magnetic interface isolated from digital and switching circuitry, and validate the complete stack-up against the manufacturer land pattern before high-volume assembly.
推薦
Network Interface Controller
The BCM5482A2IFBG can provide the copper-network physical layer for a network interface controller or embedded communications processor. Its two ports support 10 Mb/s, 100 Mb/s, and 1 Gb/s, allowing a single controller to manage two links with different negotiated speeds. The integrated transceiver function reduces the number of external physical-layer devices, but each port still needs its own compliant network interface. Digital host routing should remain separated from the analog and magnetics sections, while the clock and supply arrangements must satisfy the operating conditions stated in the manufacturer datasheet.
推薦
Router and Gateway
A router or gateway can use the BCM5482A2IFBG for two external copper Ethernet connections, including a WAN uplink and a local network port. Supporting 10 Mb/s, 100 Mb/s, and 1 Gb/s improves interoperability with existing equipment during network migrations. The broad speed range does not remove the need to implement each cable-facing channel correctly: use the specified magnetics, termination, protection, and controlled-impedance routing from the Broadcom reference design. Because the device uses a dense 121-pin BGA, assembly yield and inspection capability should be confirmed before committing the footprint to a low-volume production run.
推薦
Set-Top and Home Gateway
The BCM5482A2IFBG is suitable for compact set-top boxes and home gateways that need two Ethernet connections in a limited board area. One port can provide a 1 Gb/s local-network connection while the other negotiates 100 Mb/s or 10 Mb/s with legacy equipment. IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab compliance supports use in standards-based Ethernet equipment. In a consumer enclosure, keep switching regulators and high-current Ethernet magnetics away from sensitive PHY balls, and provide the manufacturer-specified bypass network directly at the supply connections to minimize supply-induced link errors.
推薦
Embedded Control System
The BCM5482A2IFBG can supply two isolated-speed copper links in embedded industrial controls, test equipment, or machine controllers. A 1 Gb/s port may be used for backhaul or data collection, while a 10 Mb/s or 100 Mb/s port connects to a slower field network. The device’s three supported link rates make it useful where equipment must coexist with older plant infrastructure. Reliability depends on following the manufacturer’s clock, power, decoupling, and layout recommendations, particularly because the 121-pin BGA offers little physical separation between digital, power, and transceiver-related balls. Perform link-margin testing across temperature and cable conditions.
推薦
Network Test and Measurement
The BCM5482A2IFBG can support test equipment that must connect to copper Ethernet networks at 10 Mb/s, 100 Mb/s, or 1 Gb/s. Two integrated ports allow an instrument to maintain one control connection while testing another link, or to characterize interoperability across several speed classes. Compliance with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab provides a common baseline for link behavior. For bench and production equipment, preserve the manufacturer-recommended separation between transceiver channels and sensitive logic, and verify startup behavior, link negotiation, cable reach, and immunity to external ESD before finalizing the fixture or enclosure interface.
推薦
推薦產品摘要
工程參考資料,適用於 BCM5482A2IFBG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | BCM5482SA2IFBG | BCM5482SHEA2IFBG | BCM54240C1IFBG | BCM54680B0KFBG | BCM5482A2IFBG-ND |
|---|---|---|---|---|---|---|
| Package | 121-pin BGA | 121-pin BGA | 121-pin BGA | 121-pin BGA | 121-pin BGA | 121-pin BGA |
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Product Type | Dual-port Ethernet PHY | Ethernet transceiver | Compact Ethernet transceiver | Ethernet PHY | Ethernet PHY | Dual-port Ethernet PHY |
| RoHS Status | Details available | Details available | Details available | Details available | Details available | Details available |
| Mounting Method | Surface-mount BGA | Surface-mount BGA | Surface-mount BGA | Surface-mount BGA | Surface-mount BGA | Surface-mount BGA |
主要差異化特點
- Two integrated mixed-speed copper ports (對比BCM5482SHEA2IFBG)
- Explicit 10 Mb/s through 1 Gb/s support (對比BCM54240C1IFBG)
- Dual-port integration reduces PHY package count (對比BCM54680B0KFBG)
- Same-family option with matching listed rate classes (對比BCM5482SA2IFBG)
設計說明
Use the Broadcom manufacturer reference layout and land pattern for the 121-pin BGA rather than creating a footprint from the package name alone. Confirm PCB pad dimensions, solder-mask definition, paste apertures, via-in-pad policy, and supported copper weight against the package drawing. The dense package places power, ground, digital control, clock, and analog transceiver connections in close proximity, so a geometry-correct footprint remains essential for both electrical performance and assembly yield.
Do not treat BCM5482SA2IFBG, BCM5482SHEA2IFBG, BCM54240C1IFBG, or BCM54680B0KFBG as drop-in substitutions solely because they share the Broadcom family and 121-pin BGA class. Compare every ball name, supply rail, current requirement, clock source, strap level, register address, reset behavior, transceiver feature, and magnetics recommendation against the target datasheet. A successful lab startup is not enough; validate negotiation, throughput, error-free link margins, temperature behavior, and cable reach on the intended board revision.
Separate each Ethernet channel’s cable-side magnetics and protection components from clocks, switching nodes, and high-current return paths. Route the differential pairs according to the manufacturer’s recommended geometry and maintain continuous reference planes across layer transitions. If a switching regulator sits near the PHY, move it away and evaluate its harmonics at the PHY supply pins with an oscilloscope. Adequate supply bypassing and a quiet reference arrangement help prevent false link starts and packet errors during common-mode disturbance.
Validate the 1 Gb/s links with the exact magnetics and cable assumptions planned for production. Begin with the manufacturer reference schematic, then examine insertion loss, return loss, impedance continuity, skew, and via transitions using the actual PCB stack-up. Keep test equipment and cable fixtures within controlled conditions, and compare measurements across temperature. The device supports 10 Mb/s, 100 Mb/s, and 1 Gb/s, but each rate exercises the physical channel differently, so compliance at one speed does not prove performance at the others.
合規資訊
RoHS details are identified in published Broadcom comparison information. No separate REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified.