Broadcom

BCM5482A2IFBG - Dual-Port Gigabit Ethernet PHY | Broadcom

料号: BCM5482A2IFBG ✓ 量产中
121-pin ball grid array Package
最小起订量: 1 |

BCM5482A2IFBG 概述

The Broadcom BCM5482A2IFBG is a dual-port 10/100/1000BASE-T Ethernet physical-layer transceiver with support for 10 Mb/s, 100 Mb/s, and 1 Gb/s data rates. The device is supplied in a 121-pin ball grid array package and is intended for dual-port Ethernet equipment requiring integrated copper-network connectivity. According to the manufacturer datasheet, BCM5482A2IFBG complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab.

An Ethernet PHY is an interface IC within the Ethernet transceiver hierarchy. Its primary function is to convert digital data from a MAC or network controller into signals suitable for twisted-pair cabling, while receiving and recovering incoming signals. A physical-layer transceiver bridges the digital Ethernet controller and the analog, cable-facing network interface. The BCM5482A2IFBG supports three speed categories within one device: 10 Mb/s Ethernet, Fast Ethernet at 100 Mb/s, and Gigabit Ethernet at 1 Gb/s.

The principal feature of BCM5482A2IFBG is its dual-port architecture, allowing two 10/100/1000BASE-T network connections to be implemented with one PHY package. Automatic support for 10 Mb/s, 100 Mb/s, and 1 Gb/s operation allows one Ethernet port to accommodate legacy and modern link speeds. Compliance with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab connects the device to the relevant Ethernet and 1000BASE-T physical-layer specifications. RoHS details are identified in a published comparison of this Broadcom part.

The BCM5482 family combines a conventional Ethernet PHY role with integrated transceiver functionality. Each port therefore requires a suitable magnetic-interface network path, termination, and protection network in addition to normal digital connections to the Ethernet controller. The 121-pin BGA package supports compact multi-port equipment layouts, but its dense ball pitch makes PCB assembly, inspection, and rework more demanding than a leaded package. Accurate land patterns, layer-stack requirements, and assembly-process limits should be taken directly from the Broadcom package documentation.

Typical uses include industrial Ethernet switches, network-interface controllers, routers, gateways, set-top equipment, and embedded systems that require two copper Ethernet links. In these systems, the device can reduce the number of separate PHY packages compared with a two-chip implementation. Its 1 Gb/s capability supports high-volume file transfer and backbone aggregation, while 100 Mb/s and 10 Mb/s support allows each port to negotiate a compatible speed with legacy equipment.

Design the magnetic-interface and analog network sections away from clocks, switching regulators, and high-speed digital routing. Keep the PHY supplies, decoupling network, reference components, and clock source stable because network margin depends on clean power and low-noise timing. PCB stack-up, controlled-impedance routing, via geometry, and the manufacturer’s recommended land pattern are critical when reproducing a qualified 121-pin BGA layout.

This page organizes the BCM5482A2IFBG specifications, sourcing guidance, candidate replacements, and practical Ethernet hardware considerations. It also distinguishes confirmed same-package candidates from designs that require a different PHY or require board-level revalidation before replacement.

直接替换替代料: BCM5482A2IFBG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

BCM5482SA2IFBG

✅ 直接替换
📦 121-pin BGA
Same listed 10 Mb/s, 100 Mb/s, and 1 Gb/s rate classes and dual-port 121-BGA package; feature-set and pin-function differences remain subject to manufacturer verification

📋 参考替代料(不在目录中)

BCM5482SHEA2IFBG

✅ 直接替换
📦 121-pin BGA
Same Broadcom BCM5482 family and listed 10/100/1000 Mb/s capability; compact-transceiver feature differences require pin-level validation

📋 参考替代料(不在目录中)

BCM54240C1IFBG

✅ 直接替换
📦 121-pin BGA
Same Broadcom 121-pin BGA Ethernet-PHY class and overlapping Ethernet application; port count and detailed register-level differences require validation

📋 参考替代料(不在目录中)

BCM54680B0KFBG

✅ 直接替换
📦 121-pin BGA
Same Broadcom 121-pin BGA Ethernet-PHY class; internal feature set and port-specific functions differ and require manufacturer cross-reference

📋 参考替代料(不在目录中)

BCM5482A2IFBG-ND

✅ 直接替换
📦 121-pin BGA
Identical BCM5482A2IFBG device and 121-pin BGA package with the ND ordering designation; no measured electrical difference

📋 参考替代料(不在目录中)

BCM5482A2IFBG 最大额定值与电气特性

Product Type Dual-port Ethernet physical-layer transceiver
Number of Ports 2 ports
Supported Data Rates 10 Mb/s, 100 Mb/s, and 1 Gb/s
Fast Ethernet Support 100BASE-T
Gigabit Ethernet Support 1000BASE-T
Ethernet Compliance IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab
Package Type 121-pin ball grid array
安装类型 Surface mount
Transceiver Integration Integrated Ethernet transceiver
Port Configuration Dual-port 10/100/1000BASE-T
Data Link Modes Full-duplex and half-duplex
RoHS 状态 Details available in manufacturer comparison data
Maximum Link Rate 1 Gb/s per port
Minimum Link Rate 10 Mb/s per port

BCM5482A2IFBG 121-pin ball grid array 引脚配置指南

BCM5482A2IFBG(121-pin ball grid array 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

BCM5482A2IFBG 的 121-pin ball grid array 封装引脚图

暂无详细引脚数据: BCM5482A2IFBG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

BCM5482A2IFBG 适用于 6 应用s: Industrial Ethernet Switch, Network Interface Controller, Router and Gateway, Set-Top and Home Gateway, Embedded Control System, Network Test and Measurement.

🏭

Industrial Ethernet Switch

The BCM5482A2IFBG fits an industrial Ethernet switch that requires two integrated copper-network ports. Each port supports 10 Mb/s, 100 Mb/s, and 1 Gb/s, allowing the design to accommodate legacy 10BASE-T and 100BASE-T devices as well as Gigabit equipment. The 121-pin BGA package limits board area compared with two separate high-speed PHYs, while IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab compliance provides a defined physical-layer basis. Keep each channel’s magnetic interface isolated from digital and switching circuitry, and validate the complete stack-up against the manufacturer land pattern before high-volume assembly.

🌐

Network Interface Controller

The BCM5482A2IFBG can provide the copper-network physical layer for a network interface controller or embedded communications processor. Its two ports support 10 Mb/s, 100 Mb/s, and 1 Gb/s, allowing a single controller to manage two links with different negotiated speeds. The integrated transceiver function reduces the number of external physical-layer devices, but each port still needs its own compliant network interface. Digital host routing should remain separated from the analog and magnetics sections, while the clock and supply arrangements must satisfy the operating conditions stated in the manufacturer datasheet.

🔧

Router and Gateway

A router or gateway can use the BCM5482A2IFBG for two external copper Ethernet connections, including a WAN uplink and a local network port. Supporting 10 Mb/s, 100 Mb/s, and 1 Gb/s improves interoperability with existing equipment during network migrations. The broad speed range does not remove the need to implement each cable-facing channel correctly: use the specified magnetics, termination, protection, and controlled-impedance routing from the Broadcom reference design. Because the device uses a dense 121-pin BGA, assembly yield and inspection capability should be confirmed before committing the footprint to a low-volume production run.

📺

Set-Top and Home Gateway

The BCM5482A2IFBG is suitable for compact set-top boxes and home gateways that need two Ethernet connections in a limited board area. One port can provide a 1 Gb/s local-network connection while the other negotiates 100 Mb/s or 10 Mb/s with legacy equipment. IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab compliance supports use in standards-based Ethernet equipment. In a consumer enclosure, keep switching regulators and high-current Ethernet magnetics away from sensitive PHY balls, and provide the manufacturer-specified bypass network directly at the supply connections to minimize supply-induced link errors.

⚙️

Embedded Control System

The BCM5482A2IFBG can supply two isolated-speed copper links in embedded industrial controls, test equipment, or machine controllers. A 1 Gb/s port may be used for backhaul or data collection, while a 10 Mb/s or 100 Mb/s port connects to a slower field network. The device’s three supported link rates make it useful where equipment must coexist with older plant infrastructure. Reliability depends on following the manufacturer’s clock, power, decoupling, and layout recommendations, particularly because the 121-pin BGA offers little physical separation between digital, power, and transceiver-related balls. Perform link-margin testing across temperature and cable conditions.

📡

Network Test and Measurement

The BCM5482A2IFBG can support test equipment that must connect to copper Ethernet networks at 10 Mb/s, 100 Mb/s, or 1 Gb/s. Two integrated ports allow an instrument to maintain one control connection while testing another link, or to characterize interoperability across several speed classes. Compliance with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab provides a common baseline for link behavior. For bench and production equipment, preserve the manufacturer-recommended separation between transceiver channels and sensitive logic, and verify startup behavior, link negotiation, cable reach, and immunity to external ESD before finalizing the fixture or enclosure interface.

What is the BCM5482A2IFBG?
The BCM5482A2IFBG is a Broadcom dual-port 10/100/1000BASE-T Ethernet physical-layer transceiver. It supports 10 Mb/s, 100 Mb/s, and 1 Gb/s operation on two ports and is packaged in a 121-pin BGA. According to the manufacturer datasheet, the device complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab, making it suitable for Ethernet controllers, switches, routers, and embedded network equipment.
What Ethernet speeds does BCM5482A2IFBG support?
The BCM5482A2IFBG supports 10 Mb/s, 100 Mb/s, and 1 Gb/s per port. These rates correspond to 10BASE-T, 100BASE-T, and 1000BASE-T operation. According to the manufacturer datasheet, compliance with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab covers the applicable Ethernet and Gigabit physical-layer requirements. The device can therefore accommodate legacy and Gigabit links through the same dual-port PHY package.
Where can I download the BCM5482A2IFBG datasheet PDF?
The BCM5482A2IFBG datasheet can be opened through the linked document page at https://adatasheet.com/pdf/bcm5482a2ifbg-ad310862874. The document identifies a dual-port 10/100/1000BASE-T Ethernet transceiver in a 121-pin BGA package. For board design, use the pin-description table, package outline, recommended land pattern, and electrical characteristics in the Broadcom manufacturer datasheet rather than relying on a distributor schematic preview.
Where can I find the BCM5482A2IFBG pinout?
The BCM5482A2IFBG pinout is found in the pin-description table and package drawing of the Broadcom manufacturer datasheet. The component uses a 121-pin BGA package, so its electrical and physical design must be based on every specified ball assignment, the exposed-ball requirements, and the recommended PCB land pattern. Do not infer BGA connectivity from the external dual-port description because power, ground, clock, digital control, and analog transceiver balls serve distinct functions.
How many Ethernet ports does BCM5482A2IFBG provide?
The BCM5482A2IFBG provides two integrated Ethernet PHY ports. Each port supports the same three listed data rates of 10 Mb/s, 100 Mb/s, and 1 Gb/s. This dual-port arrangement is useful when a product needs two copper-network connections but has limited board area. Each port still requires its own compliant magnetic-interface and cable-side network implementation even though both ports share one package.
Can BCM5482A2IFBG be used in a dual-port Gigabit Ethernet switch?
Yes, BCM5482A2IFBG is suitable for dual-port copper Ethernet equipment operating at 10 Mb/s, 100 Mb/s, or 1 Gb/s. Its integrated transceiver function supports a direct PHY-to-network path, while the digital interface connects to an Ethernet controller or switching fabric. The actual switch capacity also depends on the attached Ethernet controller, internal data path, firmware, and the switch silicon supporting the required number of ports and line rates.
What is the difference between BCM5482A2IFBG and BCM5482SA2IFBG?
BCM5482A2IFBG is identified as a dual-port 10/100/1000BASE-T Ethernet PHY, while BCM5482SA2IFBG is presented as a dual-transceiver variant with full- and half-duplex support. Both are Broadcom BCM5482-series devices associated with the 121-BGA class. Before substituting one for the other, verify every ball function, power domain, register map, clock requirement, strap configuration, and transceiver feature because the published descriptions do not establish complete pin-to-pin equivalence.
What can replace BCM5482A2IFBG on the same PCB?
No replacement should be approved as a drop-in solely from its port count and data rate. A valid direct replacement must use the same 121-ball land pattern, match pin functions, supply rails, clocking, strap inputs, transceiver architecture, and programming model, and satisfy the required Ethernet compliance. BCM5482SA2IFBG is the closest same-family candidate identified, but final substitution requires a manufacturer pin table comparison and successful hardware validation.
Is BCM5482SHEA2IFBG equivalent to BCM5482A2IFBG?
BCM5482SHEA2IFBG is a compact Ethernet transceiver in the Broadcom BCM5482 series, but it is not established as a pin-compatible replacement for BCM5482A2IFBG. The target is a dual-port 10/100/1000BASE-T PHY with a 121-pin BGA package, while the alternative is described more generally as a compact transceiver. Unless a manufacturer comparison confirms matching balls, rails, registers, and analog functions, treat BCM5482SHEA2IFBG as a redesign candidate rather than a drop-in replacement.
When should BCM5482A2IFBG be chosen instead of a single-port Ethernet PHY?
Choose BCM5482A2IFBG when the product needs two copper Ethernet ports and board area makes two separate PHY packages undesirable. Its integrated dual-port design supports 10 Mb/s, 100 Mb/s, and 1 Gb/s on each port in a 121-pin BGA package. A single-port PHY may be preferable when only one link is required, the enclosure limits thermal dissipation, or the selected controller has a newer companion PHY with a validated integration path.
Where can I buy BCM5482A2IFBG and check current lead time?
Use the Request a Quote form on this page to request BCM5482A2IFBG pricing, current availability, lead time, and order quantities. The component is a standard catalog Ethernet PHY with a 121-pin BGA package, so a quotation should identify the exact suffix and required packing form. Confirm lifecycle status, delivery date, and traceability directly through the quote response before releasing a production order.
What is the current price of BCM5482A2IFBG?
The current commercial price for BCM5482A2IFBG should be obtained through the Request a Quote form on this page. Pricing can vary with order quantity, packing format, component traceability, delivery date, and market availability. The quote form is the appropriate route for a price tied to the exact BCM5482A2IFBG suffix rather than a related Broadcom Ethernet transceiver or an unconfirmed alternate package variant.
Is BCM5482A2IFBG in stock?
Current stock for BCM5482A2IFBG should be confirmed through the Request a Quote form on this page. The listing indicates that the exact part is commercially available, but inventory can change rapidly and may differ by package, packing format, and delivery region. Request the quantity, target date, and traceability requirements with the quotation so the response reflects the configuration needed for the build.
How long is the lead time for BCM5482A2IFBG?
The current lead time for BCM5482A2IFBG depends on factory allocation, requested quantity, package configuration, and the manufacturing schedule. Submit the required quantity and target production date through the Request a Quote form on this page. For a new design, request the earliest available date along with a forecast allocation so procurement can compare that schedule with the product development milestones.
What key specifications should engineers check for BCM5482A2IFBG?
The principal checks are dual-port 10/100/1000BASE-T operation, 10 Mb/s to 1 Gb/s link-rate support, IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab compliance, and the 121-pin BGA package. System designers must also confirm power rails, clock source, digital host interface, magnetic-interface requirements, register compatibility, thermal conditions, and PCB stack-up from the manufacturer datasheet before releasing a design.

工程参考数据: BCM5482A2IFBG ——对比、设计指导和合规信息。

选型指南

Choose BCM5482A2IFBG when a compact system needs two copper Ethernet links with support for 10 Mb/s, 100 Mb/s, and 1 Gb/s in one 121-pin BGA package. It is a strong fit for industrial switches, routers, gateways, network controllers, and test equipment that already use a Broadcom-compatible Ethernet control path and can implement the recommended magnetics, clocking, decoupling, and controlled-impedance layout. Consider BCM5482SA2IFBG only after verifying its transceiver features, ball functions, and register map against the target. BCM5482SHEA2IFBG, BCM54240C1IFBG, and BCM54680B0KFBG are same-family review candidates, not automatic replacements, because their port counts and detailed functions require confirmation. A single-port PHY may be simpler when only one link is needed, while a newer controller-integrated Ethernet device may reduce board area but can require software and hardware redesign. For an existing BCM5482A2IFBG PCB, obtain a manufacturer-approved cross-reference and complete link, temperature, EMC, and production-yield validation before substitution.

与替代料对比

参数 本产品 BCM5482SA2IFBG BCM5482SHEA2IFBG BCM54240C1IFBG BCM54680B0KFBG BCM5482A2IFBG-ND
Package 121-pin BGA 121-pin BGA 121-pin BGA 121-pin BGA 121-pin BGA 121-pin BGA
Brand Broadcom Broadcom Broadcom Broadcom Broadcom Broadcom
Product Type Dual-port Ethernet PHY Ethernet transceiver Compact Ethernet transceiver Ethernet PHY Ethernet PHY Dual-port Ethernet PHY
RoHS Status Details available Details available Details available Details available Details available Details available
Mounting Method Surface-mount BGA Surface-mount BGA Surface-mount BGA Surface-mount BGA Surface-mount BGA Surface-mount BGA

关键差异点

  • Two integrated mixed-speed copper ports (对比 BCM5482SHEA2IFBG)
  • Explicit 10 Mb/s through 1 Gb/s support (对比 BCM54240C1IFBG)
  • Dual-port integration reduces PHY package count (对比 BCM54680B0KFBG)
  • Same-family option with matching listed rate classes (对比 BCM5482SA2IFBG)

设计说明

Use the Broadcom manufacturer reference layout and land pattern for the 121-pin BGA rather than creating a footprint from the package name alone. Confirm PCB pad dimensions, solder-mask definition, paste apertures, via-in-pad policy, and supported copper weight against the package drawing. The dense package places power, ground, digital control, clock, and analog transceiver connections in close proximity, so a geometry-correct footprint remains essential for both electrical performance and assembly yield.

Do not treat BCM5482SA2IFBG, BCM5482SHEA2IFBG, BCM54240C1IFBG, or BCM54680B0KFBG as drop-in substitutions solely because they share the Broadcom family and 121-pin BGA class. Compare every ball name, supply rail, current requirement, clock source, strap level, register address, reset behavior, transceiver feature, and magnetics recommendation against the target datasheet. A successful lab startup is not enough; validate negotiation, throughput, error-free link margins, temperature behavior, and cable reach on the intended board revision.

Separate each Ethernet channel’s cable-side magnetics and protection components from clocks, switching nodes, and high-current return paths. Route the differential pairs according to the manufacturer’s recommended geometry and maintain continuous reference planes across layer transitions. If a switching regulator sits near the PHY, move it away and evaluate its harmonics at the PHY supply pins with an oscilloscope. Adequate supply bypassing and a quiet reference arrangement help prevent false link starts and packet errors during common-mode disturbance.

Validate the 1 Gb/s links with the exact magnetics and cable assumptions planned for production. Begin with the manufacturer reference schematic, then examine insertion loss, return loss, impedance continuity, skew, and via transitions using the actual PCB stack-up. Keep test equipment and cable fixtures within controlled conditions, and compare measurements across temperature. The device supports 10 Mb/s, 100 Mb/s, and 1 Gb/s, but each rate exercises the physical channel differently, so compliance at one speed does not prove performance at the others.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS details are identified in published Broadcom comparison information. No separate REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified.

相关搜索

BCM5482A2IFBG datasheet BCM5482A2IFBG datasheet pdf BCM5482A2IFBG pinout BCM5482A2IFBG equivalent BCM5482A2IFBG replacement BCM5482A2IFBG cross reference BCM5482A2IFBG vs BCM5482SA2IFBG Broadcom BCM5482A2IFBG BCM5482A2IFBG 121 pin BGA BCM5482A2IFBG dual port PHY BCM5482A2IFBG 10/100/1000BASE-T BCM5482A2IFBG price BCM5482A2IFBG stock BCM5482A2IFBG application circuit

相关元器件 & 术语

Broadcom BCM5482A2IFBG BCM5482SA2IFBG BCM5482SHEA2IFBG BCM54240C1IFBG BCM54680B0KFBG BCM5482A2IFBG-ND Ethernet PHY Ethernet physical-layer transceiver 10/100/1000BASE-T 10BASE-T 100BASE-T 1000BASE-T IEEE 802.3 IEEE 802.3u IEEE 802.3ab 121-pin BGA ball grid array surface-mount package dual-port transceiver network interface controller industrial Ethernet switch magnetics controlled impedance RoHS
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情