Broadcom

BCM5762B0KMLG - PCIe GBE MAC/PHY Controller | Broadcom

MPN: BCM5762B0KMLG ✓ 啟用中
1 Gb/s Speed
MOQ: 1 |

BCM5762B0KMLG 概覽

The Broadcom BCM5762B0KMLG is a PCI Express Gigabit Ethernet MAC/PHY controller with DASH 1.0 support, supplied as an interface controller IC for telecommunications and networked computing equipment. The combined MAC and physical-layer architecture supports a single-chip Gigabit Ethernet connection while communicating with a host system through the PCI Express interface.

An Ethernet MAC/PHY controller is a type of interface IC that bridges a computing system and a physical network. The MAC portion manages frame processing and host-facing data transfer, while the PHY handles the electrical signaling required for Gigabit Ethernet. Combining these functions can reduce board-level component count compared with a design that uses separate Ethernet MAC and PHY devices. PCI Express provides the high-speed peripheral link used to exchange data between the controller and the host processor.

The BCM5762B0KMLG is identified as a PCI-E GBE MAC/PHY with DASH 1.0 capability. DASH 1.0 support is significant for systems that need a dedicated hardware-assisted Ethernet path rather than relying only on software-managed networking. Gigabit Ethernet support makes the device applicable to routers, gateways, embedded systems, set-top equipment, and industrial network controllers where a 1 Gb/s network interface is required.

Technical implementation requires careful coordination among the PCIe host interface, Gigabit Ethernet PHY, network magnetics, clocks, and power rails. The device integrates the digital MAC and physical-layer functions, but the external network still requires suitable magnetic coupling, an appropriate Ethernet transformer or PHY interface network, controlled impedance routing, and isolated power as required by the system architecture. Firmware and host drivers must also support the selected controller configuration.

Typical uses include telecommunications access equipment, routers, network appliances, embedded servers, and industrial Ethernet systems. In these applications, the integrated MAC/PHY arrangement can simplify board partitioning while the PCI Express interface provides a conventional host connection. System suitability still depends on the required driver, operating system, network magnetics, thermal environment, and connector implementation.

The main design consideration is verification against the manufacturer datasheet for pin assignments, power sequencing, reference clocks, PHY strap settings, and supported operating modes. Use the datasheet pin-description table when assigning PCB tracks, and preserve the specified high-speed and Ethernet differential-routing geometry to avoid signal-integrity problems.

This page combines the Broadcom device classification, procurement guidance, verified lifecycle information, interface-selection considerations, and engineering notes needed to evaluate the BCM5762B0KMLG for a PCIe Gigabit Ethernet design.

直接替換替代品,適用於 BCM5762B0KMLG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

BCM5762B0KMLG 最大額定值與電氣特性

Device Type PCI-E GBE MAC/PHY plus DASH 1.0
Product Category Telecom interface controller IC
Host Interface PCI Express
Ethernet Speed 1 Gb/s
MAC Function Integrated Gigabit Ethernet MAC
PHY Function Integrated Gigabit Ethernet PHY
DASH Support DASH 1.0
Manufacturer Broadcom

BCM5762B0KMLG standard 腳位配置指南

BCM5762B0KMLG(standard 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

BCM5762B0KMLG 的 standard 封裝腳位圖

無詳細腳位定義資料: BCM5762B0KMLG.

請參閱 資料表 以查看完整腳位配置。

典型應用

BCM5762B0KMLG 適用於 6 應用s: Telecommunications Access Equipment, Router and Gateway Interfaces, Industrial Networked Control Systems, Embedded Network Appliances, Network Interface Cards, Security and Video Edge Equipment.

🌐

Telecommunications Access Equipment

BCM5762B0KMLG fits access and aggregation equipment that requires a dedicated Gigabit Ethernet path between a host processor and the public or service-provider network. Its integrated PCI-E GBE MAC/PHY reduces the number of separate network-interface devices, while DASH 1.0 provides a hardware-assisted networking option for dedicated traffic processing. The host processor must support the controller through its PCIe interface and appropriate driver, while the board also needs Ethernet magnetics, controlled-impedance routing, and carefully isolated power where required. Design validation should cover throughput, packet handling, thermal behavior, and uninterrupted operation across the intended network load.

🌐

Router and Gateway Interfaces

The BCM5762B0KMLG is suitable for a router or gateway that needs multiple high-speed external connections and can allocate a PCIe slot or embedded PCIe lanes to Ethernet traffic. Its 1 Gb/s Gigabit Ethernet capability and integrated MAC/PHY allow the interface to operate without splitting those functions across separate controller devices. DASH 1.0 support can help systems offload selected networking operations from the main processor. Engineering teams should confirm lane availability, device-driver support, interrupt behavior, boot sequencing, and magnetics selection before committing the board layout, because these system-level factors determine whether the controller can deliver predictable routing performance.

🏭

Industrial Networked Control Systems

BCM5762B0KMLG can support an industrial controller that must exchange real-time Ethernet traffic with a host processor over PCI Express. Consolidating the Gigabit Ethernet MAC and PHY into one controller simplifies the physical network interface and leaves more board area for sensing, isolation, power conversion, and communications circuitry. For factory equipment, evaluate the controller against the system's operating-temperature range, conducted-noise requirements, network resilience, and availability expectations. The Ethernet magnetics and isolation network must be designed for the intended cable environment, and the controller layout should preserve controlled differential impedance and separation between network and host-side circuitry.

🖥️

Embedded Network Appliances

BCM5762B0KMLG is appropriate for an embedded appliance that combines compute, storage, or local processing with a Gigabit Ethernet management or service connection. The PCI Express interface fits systems designed around a modern embedded processor, and the integrated MAC/PHY can reduce component count compared with separate controller implementations. DASH 1.0 support may be useful where the system benefits from a dedicated networking path. Before board release, verify processor driver support, PCIe configuration requirements, reference-clock provisioning, boot behavior, thermal margins, and software support for the intended operating system. A production design should also include network-loopback and sustained-throughput testing under realistic packet sizes.

🖥️

Network Interface Cards

BCM5762B0KMLG can be evaluated for a PCI Express network interface card intended to add a 1 Gb/s Ethernet connection to a host platform. Its combined MAC/PHY architecture suits a compact add-in card, while DASH 1.0 provides a hardware-assisted feature set for systems that need offloaded networking behavior. Realization of the card still depends on the connector, Ethernet transformer or magnetics, isolation, reference clock, power budget, and host-side driver. Mechanical clearance, airflow, and ground-plane continuity also influence reliability. Validate the complete card with sustained traffic, hot-plug requirements if applicable, link negotiation, fault recovery, and electromagnetic-emissions testing before production release.

🧩

Security and Video Edge Equipment

BCM5762B0KMLG can serve as the network interface in an edge appliance that moves sensor, camera, or control data toward a centralized service. The 1 Gb/s Ethernet capability supports reliable transfer of typical local traffic, while the integrated MAC/PHY avoids a split controller layout. DASH 1.0 may assist designs that require predictable hardware-assisted networking, although the final benefit depends on host software and system architecture. Security-focused equipment should add appropriate isolation, surge protection, controlled boot behavior, and secure firmware management. Validate sustained transfer rates, latency under congestion, link recovery after cable or peer events, and thermal performance inside the final enclosure rather than relying only on bench-level connectivity tests.

What is BCM5762B0KMLG?
The BCM5762B0KMLG is a Broadcom PCI Express Gigabit Ethernet controller that combines the MAC and PHY functions and supports DASH 1.0. According to the Broadcom product classification, it is a PCI-E GBE MAC/PHY plus DASH 1.0 telecom interface IC. The integrated architecture allows a host processor to connect to a 1 Gb/s Ethernet network through a PCI Express peripheral link.
Is BCM5762B0KMLG an Ethernet MAC and PHY controller?
Yes, BCM5762B0KMLG combines a Gigabit Ethernet MAC and PHY in one Broadcom interface controller. The product classification specifies PCI-E GBE MAC/PHY plus DASH 1.0, while the communications path uses PCI Express as the host-facing interface. The integration reduces the need for separate Ethernet MAC and PHY components in the intended networking equipment.
What Ethernet speed does BCM5762B0KMLG support?
BCM5762B0KMLG supports Gigabit Ethernet operation at 1 Gb/s. The GBE designation in the Broadcom product listing identifies the supported Gigabit Ethernet class, while DASH 1.0 identifies the associated hardware-assisted networking feature. Application designs should still confirm PHY configuration, transceiver requirements, and supported media types against the manufacturer datasheet.
What interface connects BCM5762B0KMLG to a host processor?
BCM5762B0KMLG uses PCI Express to connect the Ethernet controller with a host system. Its device classification explicitly identifies the part as a PCI-E GBE MAC/PHY. This makes it suitable for platforms that provide a PCIe expansion or embedded interface and require a dedicated Gigabit Ethernet controller with integrated MAC and PHY functions.
Where can I download the BCM5762B0KMLG datasheet PDF?
The BCM5762B0KMLG datasheet PDF can be opened through the datasheet link listed on this product page. Use the manufacturer datasheet as the controlling document for the pin assignment table, electrical limits, reference-clock requirements, power rails, PHY strapping, and PCB layout. The linked PDF is a datasheet mirror, so engineers should also check Broadcom documentation for any current revision.
Where can I find the BCM5762B0KMLG pinout?
The BCM5762B0KMLG pinout is documented in the manufacturer pin-description table. Because the package type and complete numbered pin list are not established in the product listing, no unsupported pin assignments are reproduced here. Before routing a PCB, identify the exact package suffix and map every pin, including power, ground, clocks, reset, PCIe, and Ethernet differential pairs, directly from the Broadcom datasheet.
Where can I buy BCM5762B0KMLG online?
Use the Request a Quote form on this page to request BCM5762B0KMLG availability, unit pricing, and order quantities. The form is the appropriate purchasing route for current commercial terms and allocation. For design acceptance, include the target quantity, delivery location, required date, and whether reel, tray, or another approved packaging format is needed.
What is the price of BCM5762B0KMLG?
Request a current BCM5762B0KMLG quotation through the Request a Quote form on this page. Commercial pricing for this controller depends on quantity, availability, package format, and current market conditions, so a static unit value can become misleading. Include your annual usage and forecast with the request to obtain pricing suited to the planned production profile.
What is the lead time for BCM5762B0KMLG?
Request the current BCM5762B0KMLG lead time through the Request a Quote form on this page. Lead time can vary with order quantity, factory allocation, component availability, and delivery requirements. Providing a forecast, target build date, and approved package format allows the purchasing response to reflect the actual production plan rather than a generic availability estimate.
Is BCM5762B0KMLG in stock?
Use the Request a Quote form on this page to check current BCM5762B0KMLG stock and allocation for your required quantity. The manufacturer lists the part as active, but current inventory can change rapidly and should be confirmed for the exact MPN. Include your requested quantity, shipment destination, and target date when submitting the request.
How does BCM5762B0KMLG compare with a standalone Ethernet controller?
BCM5762B0KMLG integrates the Gigabit Ethernet MAC and PHY while using PCI Express as its host interface. A standalone controller may separate those functions or provide a different host-facing architecture, requiring an additional device and its associated routing and validation. The integrated Broadcom part is preferable when the platform is designed specifically around a PCIe GBE MAC/PHY with DASH 1.0 support.
When should I choose BCM5762B0KMLG over another Ethernet controller?
Choose BCM5762B0KMLG when the system already uses PCI Express and requires an integrated 1 Gb/s MAC/PHY with DASH 1.0 functionality. The decision should also account for driver support, operating-system requirements, external magnetic components, thermal conditions, and long-term product availability. A different controller is more appropriate when its supported host interface, PHY implementation, or qualification better matches the product.
Is BCM5762B0KMLG suitable for a router or gateway?
BCM5762B0KMLG is suitable for router and gateway designs that require a PCI Express Gigabit Ethernet connection and a hardware-assisted DASH 1.0 path. Its combined MAC/PHY architecture can simplify the network interface section. Final suitability depends on driver availability, chassis architecture, Ethernet magnetics, thermal performance, and the environmental requirements of the finished networking appliance.
What can replace BCM5762B0KMLG?
No verified pin-to-pin drop-in replacement for BCM5762B0KMLG is established, so do not substitute a controller solely by matching its speed or package name. A replacement must match the Broadcom device's PCI Express interface, Gigabit Ethernet electrical characteristics, DASH 1.0 requirements, package, pinout, clocking, power design, and host-driver expectations. Submit the exact MPN to the Request a Quote form for a controlled sourcing review.
Which Broadcom or cross-brand part is equivalent to BCM5762B0KMLG?
No verified Broadcom or cross-brand drop-in equivalent for BCM5762B0KMLG has been identified. A valid equivalent must be pin-to-pin compatible, support the same PCI Express-to-Gigabit Ethernet function, provide equivalent DASH behavior, and meet the electrical and timing requirements of the original design. Treat any candidate as a redesign until package, pinout, firmware, and driver compatibility have been validated.

工程參考資料,適用於 BCM5762B0KMLG — 比較、設計指引及合規資訊。

選型指南

Choose BCM5762B0KMLG when the product is built around a PCI Express host interface, requires a 1 Gb/s Ethernet connection, and benefits from integrating the MAC and PHY into one controller. It is particularly relevant to telecommunications, routing, gateway, industrial, and embedded network products where DASH 1.0 is part of the intended networking architecture. Confirm that the host processor supports the controller, that the required driver and operating system are available, and that the Ethernet magnetics and isolation design match the target installation. Do not substitute a similar controller solely because it also offers Gigabit Ethernet. Any alternative must be checked for identical pinout, package, PCIe behavior, PHY electrical requirements, clocking, power sequencing, DASH behavior, and driver support. Because no verified drop-in equivalent is established, changing the device should initially be treated as a redesign requiring schematic, layout, firmware, and system-level validation.

與替代品比較

參數 本產品
Manufacturer Broadcom
Device Type PCI-E GBE MAC/PHY plus DASH 1.0
Host Interface PCI Express
Ethernet Speed 1 Gb/s
MAC Function Integrated Gigabit Ethernet MAC
PHY Function Integrated Gigabit Ethernet PHY
DASH Support DASH 1.0
Lifecycle Status Active

主要差異化特點

  • Integrated Gigabit Ethernet MAC and PHY (對比A standalone MAC and PHY implementation)
  • Dedicated PCIe host connectivity (對比A controller using a non-PCIe host interface)
  • Hardware-assisted networking feature set (對比A basic Gigabit Ethernet controller without DASH)

設計說明

Use the Broadcom pin-description table to assign the PCI Express lanes, Gigabit Ethernet differential pairs, reference clocks, reset, power rails, and ground connections. Place the supporting network components and decoupling capacitance according to the manufacturer layout guidance, keeping sensitive traces away from high-current switching paths. Do not infer an equivalent pin assignment from a similar-looking controller because package suffixes can represent different lead maps.

Treat the PCIe and Gigabit Ethernet interfaces as controlled-impedance, high-speed links. Use the stackup and impedance targets specified by the manufacturer and PCB fabricator, avoid unnecessary stubs, provide continuous reference planes, and observe the required pair spacing and routing symmetry. Ethernet magnetic coupling should be placed close to the connector or physical network boundary, with protection components selected to avoid unintended loading of the PHY interface.

Do not treat the Broadcom part number alone as proof of driver or board compatibility. Confirm the host PCIe lane configuration, operating-system support, PHY strap requirements, reference-clock source, reset timing, and power sequence against the datasheet before schematic capture. A controller that enumerates correctly can still show link instability when magnetics, termination, clocking, or thermal conditions are outside the reference design.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status must be confirmed from the current Broadcom product declaration or product-page documentation for the exact BCM5762B0KMLG ordering code.

資料驗證日期: 2026-11-20 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

BCM5762B0KMLG BCM5762B0KMLG datasheet BCM5762B0KMLG datasheet pdf BCM5762B0KMLG pinout BCM5762B0KMLG specifications BCM5762B0KMLG PCIe GBE controller BCM5762B0KMLG equivalent BCM5762B0KMLG replacement BCM5762B0KMLG drop-in substitute Broadcom BCM5762B0KMLG BCM5762B0KMLG price BCM5762B0KMLG stock BCM5762B0KMLG schematic BCM5762B0KMLG DASH 1.0

相關元件與詞彙

Broadcom BCM5762B0KMLG PCI Express Gigabit Ethernet Gigabit Ethernet MAC Gigabit Ethernet PHY DASH 1.0 Interface IC Telecom IC Ethernet controller MAC PHY PCIe GBE 1 Gb/s Ethernet DASH Ethernet magnetics Controlled impedance Host processor Semiconductor
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情